Nady PEM-1000 Wireless In-Ear Monitor System

PEM-1000 - Overview

• Features:

  • System Features
  • Available on selected frequency bands within the UHF band for interferencefree, long-range performance (up to 8 systems can be operated simultaneously, depending on country and frequency band)
  • System consists of PEM-1000T transmitter and one bodypack PEM1000R receiver, both of which offer 100 channels user select-ability. Any number of additional receivers can also be operated with the same transmitter if they are all set to the same channel.
  • AUTO-SCAN on receiver unit for easily locating clear channels or manual chose Group/Channel on transmitter
  • IR (Infrared) synchronization both ways interface between receiver and transmitter
  • User-friendly menu operation with more control options shown in LCD display
  • Proprietary companding circuitry for wide Dynamic Range and clear, natural sound
  • Operating Range: Up to 500 feet typical (depending on site conditions)
  • Rugged, foam-padded traveling case provides easy, safe transport and storage
    
    PEM-1000T Transmitter
  • Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits
  • Front panel features stereo headphone monitor output jack and volume control, select button for choosing one of 100 UHF channels, Left/Right 5-segment audio input level displays, LCD channel display, and IR SYNC to system receivers
  • Back panel provides BNC jack for the detachable antenna, a combo 1/4" TRS unbalanced, and balanced XLR jacks for Left and Right Line inputs, Left and Right 1/4" TRS unbalanced loop outputs
  • Externally powered by AC-DC power adapter
    
    PEM-1000R Receiver
  • Portable bodypack receiver features a power switch switchable with built-in volume output level control, select button for choosing one of 100 UHF channels, LCD channel display, stereo/mono, Signal/ Low Battery LED indicator.
  • Receiver has AUTO-SCAN for an open channel and IR SYNC to system transmitter
  • Handy Mute Button for muting audio if desired during use
  • Operates up to 8 hours (depending on volume) on 2x1.5V AA alkaline batteries
  • Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear speakers with soft rubber mounts, designed for "custom" form-fitted comfort and optimum acoustic transfer and isolation.
  • Rear clip can be rotated 180° for attaching receiver either vertically up or down position.
   

• Specifications:

  • Specifications
  • Operating Frequency Range:
    Band 1: 673MHz - 685.375MHz
    Band 2: 583MHz - 607.750MHz
  • Modulation: Mono or stereo (MPX with pilot tone), FM: F3E ± 25KHz, nominal
  • Audio Frequency Response: 50 - 15,000Hz (-3dB)
  • T.H.D.: < 1%
  • Signal-To-Noise Ratio: > 80dB, with proprietary compounding noise reduction
  • Operating Range: Up to 500 feet typical (depending on site conditions)
    
    PEM-1000T Transmitter
  • RF Output Power: 100mW (Hi), 10mW (Lo), country dependent
  • Spurious Emission: > -55dBc
  • Frequency Stability: ± 100PPM
  • Headphones Out Power: 50mW max. @16 - 32
  • Input Impedance: 750 (L/R Audio Line Inputs)
  • Nominal Input Level: 0dBm
  • Max. Input Levels: +4dB/+10dB Selectable
  • Controls: Power ON/OFF, Menu buttons; headphones monitor volume control
  • Connectors:
    1x ¼" stereo headphones monitor out
    2x Combo ¼" and XLR female type in
    2x ¼" TS unbalanced loop out jacks
    1x 1/12" barrel-type DC input jack
    BNC antenna socket
  • Indicators: Power ON LED; Channel LCD and 5-segment L-R audio LED input displays
  • Antenna: ¼ wave rigid detachable, BNC mount
  • Power Requirement: External 12V/1000mA (110V-240V auto selection)
  • Dimension: 8.27" x 9.1" x 1.75" (210mm x 231mm x 45mm)
  • Weight: 2.98lbs (1.35kg)
    
    PEM-1000R Receiver
  • Maximum Audio Output Level: 80mW max, 5mW (Limiter ON) @16 - 32
  • RF Sensitivity: 2.5uV (-100dB/12dB SINAD)
  • Squelch Threshold: < -90dB
  • Spurious Rejection: > 55dBc
  • Audio Output Connector: 1/8" Stereo (Tip=left, Ring=Right, Sleeve=ground)
  • Controls:
    Volume/ON/OFF
    IR window
    STEREO/MONO
    Limiter ON/OFF switches
    LOCK
    SYNC
    SCAN buttons
    MUTE button
  • Indicators: Low Battery LCD (5 Bars), Signal ON (RED LED)
  • Power Requirements: 2x 1.5V alkaline batteries
  • Current Drain: 130mA - 260mA
  • Battery Life: Up to 8 hours, volume dependent
  • Antenna: External Flexible
  • Dimensions: 4.5" x 0.9" x 2.6" (115mm x 23mm x 66mm)
  • Weight: 2.85oz (80kg)
   

• Warranty:

  • 1 Year Limited Warranty
   

• GTIN:

  0634343282306