Sonifex LD-40F1REC Single Flush Mounting 40cm RECORD Sign

The SignalLED range of illuminated RGB LED signs are a new range of signs designed for installers. Because the sign itself contains the control electronics, and RGB LEDs are used, the signs can be simply configured onsite for your particular requirements.
RGB LEDs - Any Colours Possible The illuminating LEDs in the unit are RGB meaning that any colour can be produced. For ease of use, as standard you can configure the sign from one of 6 colours: white, green, red, blue, yellow & orange.

Different Display Modes
Four modes of illumination are available:

• Constant illumination.
• Flashing, regularly on/off.
• Pulsing - flashing, then off, repeated
• Off

Simple Installation
The signs are supplied with a 6V wall-wart power supply & lead. Simply wire up your control signal(s) and DC input to the `screw terminal block' inside the sign, route the cables through the integral cable clamp and mount the unit on the wall.
The display mode and colour options are set-up using an 8 way DIP switch, accessible after installation.

Physical Specification

• Power Input: 5-7V DC
• 40cm Sign: 500mA max
• Input Connector: 4 way screw terminal block
• Control Inputs: 2 x pull-down to 0V
• Dimensions:: 40cm (W) x 8cm (H)