The Cobra R500-2 is a twisted pair receiver for multi-format video and RS-232 signals. The unit converts a twisted pair signal back into its original video format (composite video, s-Video, component video and computer graphics video) and RS-232.
Specifications:- INPUT: 1 CAT 5 on an RJ-45 connector.
- OUTPUTS: 1 composite, component, s-Video, and computer graphics on a 15-pin HD (F) connector; 1 RS-232 on a 3.5mm mini jack.
- MAX. RESOLUTION: UXGA & 720p/1080i @60Hz at 150m (500ft) or less.
- VIDEO SUPPORT: To UXGA (1600x1200 @60Hz), RGBHV, RGB, composite, s-Video, component video modes.
- REQUIRED IMPEDANCE: Video IN/OUT: 75 Ohm.
- SERIAL CHARACTERISTICS: Protocol: asynchronous, transparent to data format, transparent to data rates up to 19.2kbps duplex, data rates to 115kbps simplex; 3-wire Tx, Rx, Gnd.
- CABLE REQUIRED: CAT 5, 5e, 6 shielded or unshielded twisted pair.
- COMPLIANCE: CE; FCC Class A, IC Class/class A.
- POWER: +5V DC, 260mA.
- DIMENSIONS : 2.2cm x 7.9cm x 9.5cm (0.88" x 3.12" x 3.75") W, H, D.
- WEIGHT: 0.26kg (0.56lb).
- ACCESSORIES: Power supply.
Features:- HDTV Compatible.
- Resolution - UXGA & 1080i/720p.
- Input - RJ-45.
- Output - Composite, s-Video, component & computer graphics video on a 15-pin HD connector (uses a breakout cable for CV, Y/C & component signals) and RS-232 on a 3.5mm mini jack.
- EQ Control - 4 DIP-switch settings.
- Data Mode - Up to 19.2Kbps (duplex) and 115Kbps (simplex).
- Tru-Sync Technology - Ensures accurate sync reproduction over long distance transmission resulting in a stable and properly centered video image on the display.
- Multi-Pole Filtering Technology - Advanced UTP attenuation and roll off correction for long distance video transmission ensures clear, sharp images on the display.
- System Range - 150m (500ft) at UXGA/720p/1080i.
- For Best Results - Use Kramer BC-HDTP ultra-low skew UTP cable.
- Compact Kramer TOOLS - Built-in mounting bracket.
- Size - TOOLS
"
