The Cobra T2 is a twisted pair transmitter for multi-format video and RS-232 signals. The unit converts composite video, s-Video, component video or computer graphics video and RS-232 to a twisted pair signal.
Specifications:- INPUTS: 1 composite, component, s-Video, and computer graphics video on a 15-pin HD connector; 1 stereo audio or S/PDIF on a 4-pin terminal block; 1 RS-232 on a 9-pin D-sub connector; 1 video loop on a 15-pin HD connector.
- OUTPUTS: 1 CAT 5 on an RJ-45 connector.
- MAX RESOLUTION & REFRESH RATE: WUXGA & 1080p @60Hz (receiver dependent).
- VIDEO SUPPORT: To WUXGA, RGBHV, RGB, composite, s-Video, component video modes.
- REQUIRED IMPEDANCE: Video IN/OUT: 75 Ohm; Audio IN/OUT: 600Ohm; S/PDIF audio models: 75 Ohm.
- AUDIO CHARACTERISTICS: Full stereo, line level, 600 Ohm unbalanced.
- CABLE REQUIRED: CAT 5, 5e, 6 shielded or unshielded twisted pair.
- SERIAL CHARACTERISTICS: Protocol: 3-wire, fixed baud rate of 9600.
- COMPLIANCE: CE; FCC Class A, IC Class/Class A.
- POWER: +5V DC; consumption: 5W max.
- DIMENSIONS: 3.1cm x 10.4cm x 10.9cm (1.2" x 4.2" x 4.3") W, D, H.
- WEIGHT: 0.45kg (1.0lb).
- ACCESSORIES: Power supply.
- OPTIONS: Cobra TM-4 19" rack adapter or Cobra TMW mounting bracket.
Features:- HDTV Compatible. Max. Resolution - WUXGA & 1080p.
- Inputs - Composite, s-Video, component & computer graphics video on a 15-pin HD connector (uses a breakout cable for CV, Y/C & component signals) and RS-232 on a 9-pin D-sub connector.
- Looping Input. Output - RJ-45.
- AC or DC Coupling (Selectable). Data Mode - Up to 19.2kbps (duplex) and 115kbps (simplex).
- Tru-Sync Technology - Ensures accurate sync reproduction over long distance transmission resulting in a stable and properly centered video image on the display.
- Sync Settings - Tru-Sync (default) & fixed.
- System Range - Receiver dependent.
- For Best Results - Use Kramer BC-HDTP ultra-low skew UTP cable.
- Compact Kramer TOOLS - TM-4 19" rack adapter or TMW U-shaped mounting bracket available.
- Size - TOOLS
"
