SurgeX SX20NERT Surge Eliminator & Power Conditioner - 20 Amps at 120 Volts
The SurgeX SX20 NE/RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.
The unit can be controlled with an applied voltage (5-30 vdc) or a contact closure switch connected to the Phoenix connector terminal block. The connector can also be used to cascade multiple units or provide status to a central controller.
The SX20 NE/RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable, 12" x 12" x 4" NEMA enclosures and meet code for use at the service entrance, sub-panels and in ceiling plenums.
The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering as well as SurgeX ICE -Inrush Current Elimination for a comprehensive power conditioning solution.
SurgeX Advanced Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.
SurgeX SX20NERT Features:
- Magnetic shielding steel enclosure
- Advanced Series Mode surge protection
- Advanced Impedance Tolerant EMI/RFI filtering
- SurgeX ICE inrush current elimination technology
- Remote turn-on
- Self-test circuit with visual indicator
- 10-year warranty
- Made in U.S.A.
SurgeX SX20NERT Specifications:
- Load Rating: 20 amps @ 120 volts
- Power Requirement (no load): 15 watts
- Surge Let-Through Voltage (6000-volt surge): 0 volts
- UL 1449 Adjunct Classification Test Results:
1000 surges, 6000 volts, 3000 amps, B3 pulse;
Measured suppressed voltage: 170 volts; no failures.
- Federal Guidelines: Grade A, Class 1, Mode 1
(CID A-A-55818).
- EMI/RFI Filter, Normal Mode (50-ohm load):
40 dB @ 100 kHz; 50 dB @ 300 kHz;
50 dB @ 3 MHz; 50 dB @ 30 MHz
- EMI/RFI Filter, Common Mode (50-ohm load):
18 dB @ 300 kHz; 30 dB @ 1 MHz;
50 dB @ 5 MHz; 50 dB @ 20 MHz
- Maximum Applied Surge Voltage: 6000 volts.*
- Maximum Applied Surge Current:
Unlimited, due to current limiting.*
- Maximum Applied Surge Energy:
Unlimited, due to current limiting.*
- Endurance (C62.41-1991 Category B3 pulses):
1 kV>500,000; 3 kV>10,000; 6 kV>1000
- Maximum Load Inrush Current During Power-up: 1000 Joules
- Remote Turn-on Applied Voltage Range: 5 to 30 volts DC
- Remote Turn-on Current Draw:
Contact Closure: 3 mA
5 V DC Applied Voltage: 1 mA
12 V DC Applied Voltage: 2.5 mA
24 V DC Applied Voltage: 5 mA
- Auxiliary Relay Contact Rating: 30 Volts at 1 Amp
- LED Output: 12 volts DC, maximum 20 mA (resistor required)
- Dimensions: 12.0" H x 12.0" W x 4.0" D (30.5 x 30.5 x 10.2 cm)
- Weight: 12 lbs (5.45 kg)
- Temperature Range: 5§ to 35§ C
- Humidity Range: 5% to 95% R.H., non-condensing
- Agency Listings: ETL and cETL (UL 1449, 2nd edition;
CSA C22.2 No.8-M1986, R2000)
*1.2 x 50 æs pulse, industry standard combination wave surge, as per IEEE C62.41
