Remote Audio MEON V2 Uninterruptible Cart Power System
You have an early morning call, outside, and it's dark... and the Electrics are still running cable... but you need to get started... No problem. With the MEON, you're on.
You're halfway through a long dialog scene. great performance... the director is loving it... Then someone trips over your AC power cord and pulls it out while recording. No problem. With the MEON, you're on.
The 1st AD calls for an unscheduled quick shot a hundred yards away. No AC power. No time for the genny. No problem. You roll your cart to the new set without having to power down. The quick shot turns into several hours. No problem. With the MEON, you're on.
How many Amps does your cart use? How many Amps does each item you are powering use? How much battery charge remains? Is your battery charging? With the MEON, you know.
The MEON v2, is a self-contained power system that provides up to 18 Amps of 12 Volt DC and 29 Amp-hours of internal Nickel Metal Hydride battery backup to eleven standard 4-pin outlets, all in a single, silent, 2-rackspace module weighing less than 25 pounds.
The MEON v2 employs a lighted two button ON or OFF system to prevent accidental power up or down of the system. Pressing any one of these buttons by itself will have no effect. When the unit is getting 120VAC-240VAC power, current is provided by a low-noise AC-DC power supply and the internal battery charges. The power buttons glow GREEN. When AC power is unavailable or interrupted, the battery seamlessly takes over. Power buttons then glow RED. When AC power is restored, the AC-DC power supply seamlessly takes over again and the battery resumes charging, and the power buttons glow GREEN again, thus informing you of the origin of your power at all times.
Features
- All-in-one, rack mountable uninterruptable power system
- Saves valuable cart space and minimizes overall cart weight
- Contains Nickle Metal Hydride battery
- Complete recharge in 7 hours or less
- 29 Amp-hours of 12VDC = 4 to 5 hours of battery backup power for a typical sound cart
- Internal microprocessor controller allows no overcharging or deep discharge
- Eleven 4-pin power outlets on rear panel - 4 @ 13 Amps & 7 @ 6 Amps
- Auto-resetting breakers on each outlet protect against short circuit and overload
- 18 Amps of 13.8VDC when plugged into 110VAC - 240VAC mains
- Two ON/OFF buttons prevent accidental power on or power down
- Convection cooling = no fan noise
- RM (remote meter) port and master/slave indicator light
