IDX CW-5HD-AB Wireless HD Video Transmission System in Anton Bauer Configuration
All sides of TX and RX modules are in three stud mount version.
- Multiple video formats and profiles including 1080i/23.98PsF
- Automatically detects between HD-SDI and SD-SDI signals
- Transmission range of 150 feet line of sight or up to 100 feet through walls (actual range may vary depending on site conditions)
- No special FCC license is required for operation
- 2-channel embedded audio ensures no signal interference for complete audio/video syncronization.
- Selection of 4 manual channel frequencies--ideal if operating multiple systems in close proximity.
- Stylish and rugged design, with no visible external antenna
- 12W power consumption and weighs under 2 lbs.
- TX features loop-through; RX outputs dual simultaneous signals
- Conformance to major technical and environmental standards including FCC, CE and ROHS specifications
Transmitter and Receiver Specification
- Frequency: 5.18GHz - 5.86GHz
- Tuning Range / Frequency selection: Four selectable channels or one auto select (TX only)
- Transmit Power: 49mW maximum (TX only)
- Transmitter/Receiver Antenna: Internal 2dBi gain
- Transmit Method: MIMO
- Modulation: Orthogonal Frequency Diversity Multiplexing (OFDM)
- Latency: Less than 1ms
- Video Input: HD-SDI (SMPTE 292M) and SD-SDI (SMPTE 259M-C)
- Video Formats: HD-1080i/59.94, 1080i/50, 1080i/23.98PsF, 1080p/29.97, 720p/59.94, 720p/50 SD-525i/59.94, 625i/50
- Audio Output (TX)/Audio Input (RX): Two channels SDI embedded channel 1 and 2
