IDX ES922 Package; VL-2PLUS Charger and 2 EHL9S Batteries
IDX VL-2PLUS 2-Channel Sequential V-Mount Quick Charger with 60W AC Adaptor
The best way to extend the operational life of ENDURA batteries is to use an ENDURA charger, which treats every individual battery with the fastest and safest electronic charge available. The VL-2PLUS will charge each channel sequentially with unrivalled high speed and reliability.
The VL-2PLUS can be used just about anywhere space is at a premium, from the production studio to location shoots. In this environment, the VL-2PLUS's built-in 60W AC adaptor becomes a
real advantage.
IDX VL-2PLUS Features:
- Sequential 2-channel charging in either position. The VL-2PLUS will charge the first battery connected to either VMount channel, automatically switching to charge the second
battery after the first is fully charged.
- Integrated 60W DC power supply provides 60W XLR output for the camera, lighting and ancillary broadcast devices.
- VL-2PLUS compatible batteries: All ENDURA V-Mount Li-ion batteries, and all NP Li-ion/Ni-CD batteries from IDX can be charged with an A-E2NP adaptor, available separately.
- Internal safety features protect both the battery and charger from serious damage should faulty or misused batteries be placed on charge. The VL-2PLUS will automatically stop charging should any battery reach an over voltage condition.
- Lightweight, high impact polycarbonate enclosure weighs a total of just 2 lbs., and features a recessed power switch and integrated carry handle.
- Universal AC input voltage for worldwide operation; CA4XLR 4-pin power connection cable is included as standard accessory.
IDX VL-2PLUS Specifications:
- Input Voltage: AC 100~240V 50/60Hz
- Power Consumption: 140VA max.
- Quick Charge Current: 2.3A (Li-ion) 1.9A (Ni-CD)
- DC Output: 60W (4.3A @ 13.8V)
- DC Output Connector: 4-pin XLR (included)
- Operating Temperature: 32øF ~ 104°F
- Dimensions: 5.94(W) x 3.11(H) x 8.35(D) inches
- Weight: 2.09 lbs. approx.
88Wh Li-ion V-Mount High Load Battery
- Capacity : 88Wh(14.4V/6.15Ah)
- Typical camera run-time : 3 hours approximately (@30W)
- Dimensions : 3.35(W)x5.59(H)x1.97(D) inches
- Weight : 1.59 lbs approx
The new E-HL9S is an economical alternative pack with the same single unit power capacity as the E-HL9. Its 10.0 Amp/120W high load discharge translates into a 50% improvement over similar models in its classification. Its 3 LED power status indicator gives operators an immediate confirmation of the power level. E-HL9 series models have the same sleek and elegant housing as the E-10 and E-7 series.
E-HL9S Power Indicator
With an easy and quick visual display on the side of the battery, the power indicator references remaining charge status. 3 LED indicator shows battery levels and the center LED is used to indicate if the battery has been used since the previous complete charging event.
