|
Blackmagic Design HDL-PROOPTDVI HDLink Optical Fiber
HDLink Optical Fiber includes amazing quality DVI and HDMI monitoring with 6 channels of RCA analog audio out, 3D lookup tables, single link 3 Gb/s SDI input, single link 3 Gb/s SDI loop thru output, optical fiber SDI input, optical fiber SDI loop-thru output and support for 24 inch displays for HD monitoring and 30 inch displays for real time 2K monitoring.
Full Resolution HD Monitoring
HDLink and HDLink Pro connect SDI video directly to any supported DVI-D based LCD computer monitor for incredible true HDTV resolution video monitoring. The new HDLink Pro model introduces 3 Gb/s SDI for high resolution 2K film monitoring when connected to a large 30 inch DVI display. With every individual pixel in the HD or 2K SDI connection digitally mapped directly to the pixels of the LCD display, you get a perfect digital-to-screen pixel for pixel HDTV or 2K display. Connect any HDMI television or video projector to HDLink for cinema style monitoring! Even large 23 inch CRT based monitors can't display the full resolution of the HD-SDI signal, but with HDLink you see every pixel in the HD signal, so you'll always see a perfect image. You'll be amazed at the quality of High Definition or 2K video when you monitor via HDLink for the first time. There's simply no higher resolution HDTV monitoring possible!
Supports both DVI and HDMI
HDLink supports all DVI-D based digital computer displays and now also includes HDMI video support. HDMI supports video at 1080i/50, 1080i/59.94 and 720p/59.94 on any HDMI device. DVI-D supports displays at 1920 x 1200 (16:10) resolution for all 1080 HDTV formats. When working in 720 HDTV formats you can even use lower cost 1280 x 800 resolution display for pixel for pixel 720p viewing. When working in NTSC or PAL, HDLink can 2x oversize the displayed image making viewing easier. Because most computer displays are limited to approximately a 60 Hz refresh rate, HDLink will automatically apply pull-down to allow video frame rates to be displayed. HDLink includes a built-in Power PC processor allowing automatic adjustment of native display resolutions using VESA E-EDID1.3.
World's Highest Quality 3 Gb/s SDI in 4:4:4
HDLink introduced the world's first full HDTV resolution 4:4:4 monitoring solution that supports both standard definition SDI, HD-SDI and Dual Link HD-SDI 4:4:4 for full resolution color monitoring. Dual Link HD-SDI 4:4:4 uses two HD-SDI video cables for twice the color resolution. Conventional SD and HD video is 4:2:2 based, which limits color detail while 4:4:4 HD video preserves the full color detail which is important for critical keying and feature film work.
HDLink Pro is the first solution for the new high speed 3 Gb/s SDI standard for 4:4:4 RGB and 2K film monitoring. 3 Gb/s SDI runs twice the data rate of normal HD-SDI video, allowing 4:4:4 RGB video to be connected using a single SDI connection. 3 Gb/s SDI also allows full resolution 2K feature film quality 2048 x 1556 video to be connected via SDI.
Built in Optical Fiber
The HDLink Optical Fiber model is the worlds first broadcast monitoring solution with built in optical fiber SDI connections. Optical fiber easily handles long distances, is low cost, and optical fiber cables last virtually forever because you can keep plugging them into faster equipment in the future, and the same cables will go much faster. Optical fiber cables can be installed by your local electrician, and the cables can be purchased from your local electrical wholesaler. That's because optical fiber is used all the time in computer networking, so it's low cost and commonly available! Now you can build a native optical fiber facility!
|
