B-Stock Inventory
The ROUTE-4 provides a simple solution for routing multiple video sources in and out of your Non-Linear Edit (NLE) System. This clever router enables selection between four video sources to feed your NLE input in three video formats: Component, Y/C and Composite. Balanced 2-Channel audio and RS422 machine control will follow the video selection.
By connecting the NLE output to the ROUTE-4's assignment section, the NLE signals can be sent to any one of 4 devices, including the inputs to the same VTRs used in the NLE download process. The ROUTE-4 provides a distinct advantage over multiple format patchbays, and with just a 2RU cabinet, it saves valuable rack space. PAL or NTSC Compatible.
4x1 Source Selector Section
Video
- 4 Component: R-Y, B-Y, Y (7-Pin Female - 7 Pin Male to 3 BNC breakout cable provided)
- 4 YC Video: (4-Pin Din female)
- 4 Composite Video: 75 Ohm BNC connectors
Audio and Machine Control I/O
- 4 Dual Channel Balanced (15-Pin D-Sub - 15 Pin D-Sub to Female XLR Breakout Cable Provided
- 4 Mono Unbalanced (RCA Phono)
- Control: 4 RS422 serial control-full duplex (9-Pin D-Sub each device)
1x4 Destination Selector Section
Video
- 4 Component: R-Y, B-Y, Y (7-Pin Male - 7-Pin Female to 3 BNC breakout cable provided)
- 4 YC Video: (4 Pin Din female)
- 4 Composite Video: 75 Ohm BNC connectors
Audio
- 4 Dual Channel Balanced (15 Pin D-Sub - 15 Pin D-Sub to Male XLR Breakout Cable Provided)
Editor Interface Input/Output
- Component Video: 1 R-Y, B-Y, Y (3 BNC Connectors)
- YC VIDEO: 1 YC 4-Pin Din Female Connector
- COMPOSITE VIDEO: 1 75 Ohm BNC Connector
Balanced Audio I/O
- 1 Dual Channel: 15-Pin Male D-Sub (15-Pin to 2 Female XLR breakout Cable Provided)
- 1 Mono Channel: RCA Connector
Serial RS422 I/O
- 1 9-Pin Female D-Sub Connector
UTILITY PORT
- 1 9-Pin Male D-Sub Controls External Add-on Modules
Specifications
Video Performance
Measured with a 40 IRE 3.58Mhz sine wave a linear ramp 0-100 IRE
- Bandwidth: 70Mhz unity gain bandwidth
- RESPONSE: DC - 100Mhz overall
- DC - 70Mhz Baseband @ + 0.05dB
- TILT: < 0.5%
- OVERSHOOT: < 0.15%
- DC OFFSET: 0V @ 1Vp-p into 75 ohm
- Differential Gain: 0.01%
- Differential Phase: 0.05%
- ADJ. Crosstalk: -65dB tested at 10Mhz
Audio Performance
Measured with 1KHz 1.2Vp-p sine wave (balanced audio)
- Frequency Response: 10-60KHz + 0.1dB
- S/N Ratio: 85dB, at specified tested center frequency for response
- Distortion: < 0.05%
- Crosstalk: > 110dB isolation
Front Panel Controls
- SOURCE SELECTOR: 4 Pushbuttons with LED confirm: Selects 1 of 4 source devices to Editor
- RECORD DESTINATION SELECTOR: 4 Pushbuttons with LED confirm: Selects 1 of 4 destinations
- RS422 CONTROL: Toggles RS422 control between Source Select or Record Destination switches
Dimensions & Power
- Power: 110/220V AC 50/60 Hz @ .5amps, Automatic Switching
- Dimensions: 3.5"H x 7"D x 19"W EIA Rackmount
