Markertek - America's Broadcast Supply House

Call 800-522-2025
M-F 8:30am - 7pm EST

 
 

Need Assistance?

Get unbiased, vendor-neutral advice from actual broadcast & pro-audio professionals.

  • Online:
  • Contact Us
  • By Phone:
  • Toll Free: 800-522-2025
    (USA, Canada, Mexico, Caribbean)
    International: 845-246-3036
    Fax:: 845-246-1757

    Hours of Operation:
    8:30am - 7:00pm Eastern
    Monday - Friday

View As:

Sort By:

Display:

DaySequerra:

Page:

►►
    ◄◄
     
     
     
    • ATI MMA400-1 4-Ch Mic-to-Line Amp w/Transformer Balanced Output

      ATI MMA400-1 4-Ch Mic-to-Line Amp w/Transformer Balanced Output

      The ATI MMA400-1 gives you four individual mic channels of amplification. Each channel accepts up to -20dBu without clipping. Up to 84dB of gain is available to boost mic levels to up to +24dBm and provide 600 ohm line levels with true transformer balanced outputs.

      Use these versatile units as microphone, line buffer, IHF consumer interface, audio distribution and level matching amplifiers. Drive headphones or interface phone lines. Combine channels with rear connector jumpers to form stereo summ

       

      Read More

      Item #: ATI-MMA400-1

      Availability: Direct Ship From Manufacturer

      Our Price: $950.00

      Add to Wishlist
    • ATI DDA-106XLR-S2 1X6 AES/EBU Digital Audio DA New Series 2 XLR I/O

      ATI DDA-106XLR-S2 1X6 AES/EBU Digital Audio DA New Series 2 XLR I/O

      The new Series 2 DDA-106XLR gives you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Two switchable inputs let you choose from multiple input streams. Selectable re-clocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your audio is clean or let you know why it’s not.

       

      Read More

      Item #: ATI-DDA106XLRS2

      Availability: Direct Ship From Manufacturer

      Our Price: $1,050.00

      Add to Wishlist
    • ATI DA1008-1 1X8 Distribution Amp metered Plus-22dBm Transformer Output

      ATI DA1008-1 1X8 Distribution Amp metered Plus-22dBm Transformer Output

      With its new higher power output and lower noise, the updated DA1008-1 is ideal for every application and every budget. With the DA1008-1, you’ll avoid RF and hum pick-up problems from noisy, lossy splitters, eliminate hard-to-find shorts from multiple taps on critical lines, boost low console outputs, drive long lines and eliminate rolloff and distortion from mismatched load impedances. The DA1008-1 is designed for desktop mounting, and can be rack mounted in 1RU of space with our 21181-501 Acc

       

      Read More

      Item #: ATI-DA1008-1

      Availability: Direct Ship From Manufacturer

      Our Price: $1,750.00

      Add to Wishlist
    • ATI DDA-212XLR-S2 Dual 1X6 AES/EBU Digital Audio DA New Series 2 XLR I/O

      ATI DDA-212XLR-S2 Dual 1X6 AES/EBU Digital Audio DA New Series 2 XLR I/O

      The new Series 2 DDA-212XLR gives you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. A unique front-panel Mode Switch lets you configure the DDA-212XLR between Dual 1x6 or 2-Input 1x12 operation.

      Selectable re-clocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your

       

      Read More

      Item #: ATI-DDA212XLRS2

      Availability: Direct Ship From Manufacturer

      Our Price: $1,326.49

      Add to Wishlist
    • ATI MXS100 Portable or Rack Mount Mixer

      ATI MXS100 Portable or Rack Mount Mixer

      The MXS100 is a full featured stereo field mixer with three XLR switchable Mic/Line low noise balanced inputs, phantom power, pan pots, switched low cut filters, slate microphone, stereo tape in and tape out jacks (new), and a test tone oscillator driving stereo, bright LED bargraph VU meters, low distortion servo XLR balanced switchable mic/line outputs (new) with switchable peak limiting, and a stereo program/cue headphone output.

      The MX200 is a lower cost stereo mixer for studio applications t

       

      Read More

      Item #: MXS100

      Availability: Direct Ship From Manufacturer

      Our Price: $1,375.00

      Add to Wishlist
    • ATI UB400B 4-Ch Unbalanced RCA to Balanced XLR Converter

      ATI UB400B 4-Ch Unbalanced RCA to Balanced XLR Converter

      The ATI UB400B is a 4-channel interface amplifier designed to interconnect consumer grade and semi-professional equipment into professional, balanced, low impedance audio systems. The UB400B has 4 RCA inputs and 4 XLR outputs to provide a unidirectional four-channel interface that converts four IHF level signals into four balanced professional outputs.

      The UB400B is particularly useful in protecting the four, eight or sixteen main or monitoring IHF outputs of low cost mixers and tape decks. The U

       

      Read More

      Item #: ATI-UB400B

      Availability: Direct Ship From Manufacturer

      Our Price: $275.00

      Add to Wishlist
    • ATI ADAC-2 24-bit 192kHz D-to-A and A-to-D & Sample Rate Converter

      ATI ADAC-2 24-bit 192kHz D-to-A and A-to-D & Sample Rate Converter

      The ATI Model ADAC-2 gives you unsurpassed A-to-D, D-to-A and sample rate conversion. Each section of the ADAC-2 can operate independently and simultaneously, giving you thee superior production tools in one. Operation is simple and intuitive with pushbutton selection of inputs, sample rates and word length. A Class-A oversampled headphone monitor jack is standard, along with a unique “control lockout” feature to prevent unauthorized changes to your setup.

      The ADAC-2 features three independent si

         

        Read More

        Item #: ATI-ADAC-2

        Availability: Direct Ship From Manufacturer

        Our Price: $1,675.00

        Add to Wishlist
      • ATI DA416 Quad 1X4 Distribution Amplifier - Clipping Indicator

        ATI DA416 Quad 1X4 Distribution Amplifier - Clipping Indicator

        ENCORE 1X4 rack mount DAs have independent +24dBm active balanced outputs with individual gain controls. Phoenix-style or barrier strip I/O.

         

        Read More

        Item #: DA416

        Availability: Direct Ship From Manufacturer

        Our Price: $875.00

        Add to Wishlist
      • ATI MM100 Matchmaker Level and Impedence Matcher

        ATI MM100 Matchmaker Level and Impedence Matcher

        ProblemConsumer equipment can offer unique features, performance or pricing making it very desirable for professional use. Unfortunately, RF pick up, crosstalk, high frequency rolloff, hum loops and distortion often result from direct connection of low level IHF outputs into 6001/2 systems in studio or broadcast environments.SolutionThe Match Maker¬ and Disc Patcher¬ level and impedance matching interfaces match semi-pro, industrial and consumer audio equipment into professional balanced 6001/2

         

        Read More

        Item #: MM100

        Availability: Direct Ship From Manufacturer

        Our Price: $575.00

        Add to Wishlist
      • ATI DA2016-1 Dual 1X8 DA Metered Plus-22dBm Transformer Output

        ATI DA2016-1 Dual 1X8 DA Metered Plus-22dBm Transformer Output

        With its new higher power output and lower noise, the updated DA2016-1 is ideal for every application and every budget. With the DA2016-1, you'll avoid RF and hum pick-up problems from noisy, lossy splitters, eliminate hard-to-find shorts from multiple taps on critical lines, boost low console outputs, drive long lines and eliminate rolloff and distortion from mismatched load impedances. The DA2016-1 is designed for desktop mounting, and can be rack mounted in 1RU of space with our 21181-501 Acc

         

        Read More

        Item #: DA2016-1

        Availability: Direct Ship From Manufacturer

        Our Price: $2,365.00

        Add to Wishlist
      • ATI BI400 4 CH Bi-Directional Balanced to Unbalanced Converter

        ATI BI400 4 CH Bi-Directional Balanced to Unbalanced Converter

        Consumer audio equipment can offer unique features, good performance and attractive pricing making it very desirable for professional use. Unfortunately, RF pickup, ground coupled cross talk, high frequency roll off, hum loops and distortion are often the results of the direct connection of low level unbalanced IHF outputs into the 600 ohm balanced systems used in studio or broadcast environments. Consumer and semi-professional equipment can be identified by the use of RCA type connectors, typic



           

          Read More

          Item #: BI400

          Availability: Direct Ship From Manufacturer

          Our Price: $335.00

          Add to Wishlist
        • ATI UADC-1 Analog to Digital Audio Converter / Switch

          ATI UADC-1 Analog to Digital Audio Converter / Switch

          The ATI UADC-1 Utility Analog-Digital Converter gives you professional quality 24-bit A-to-D conversion, and can provide seamless AES audio path insertion and interruption functions.

          The UADC-1 may be used as a standalone high quality A/D converter or to interrupt an AES stream and insert an analog input via remote control, making it a perfect companion for analog EAS encoders / decoders. The UADC-1 is equipped for failsafe operation with relay bypass if power is lost.

          The A/D converter is shippe

           

          Read More

          Item #: UADC-1

          Availability: Direct Ship From Manufacturer

          Our Price: $450.00

          Add to Wishlist
        • ATI DA1000 1X8 Audio Distribution Amplifier (Term Strip I/O)

          ATI DA1000 1X8 Audio Distribution Amplifier (Term Strip I/O)

          With their new higher power outputs (+26dBm) at lower noise (-100dBm EIN) the updatedDA1000 and the DA2008 are ideal for every application and every budget.

          Avoid RF and hum pick-up problems from noisy, lossy splitters. Prevent hard-to-find shorts from multiple taps on critical lines. Boost low console outputs. Drive long lines. Eliminate rolloff and distortion from mismatched load impedances. These ATI DAs are designed for permanent rack mounting and use reliable barrier block connectors with fa

             

            Read More

            Item #: ATI-DA1000

            Availability: Direct Ship From Manufacturer

            Our Price: $675.00

            Add to Wishlist
          • ATI Single Channel Stereo Headphone Amplifier

            ATI Single Channel Stereo Headphone Amplifier

            The HDA100 is a rugged AC powered headphone amplifier that will provide excellent performance driving a wide range of typical stereo headphones. It will drive the usual 32 to 600 ohm high efficiency stereo headphones to teeth rattling levels around 120dB SPL with a combination of high output voltage swing (16Vp-p) for high impedance phones and a protected high current capability (.2Ap-p) for low impedance phones. It will do the above at distortion levels below .10% and response flat to .25db bot

               

              Read More

              Item #: HDA100

              Availability: Direct Ship From Manufacturer

              Our Price: $325.00

              Add to Wishlist
            • ATI DA208 Dual 1X4 Distribution Amplifier with Clip LEDs Plus-18dBm Output

              ATI DA208 Dual 1X4 Distribution Amplifier with Clip LEDs Plus-18dBm Output

              The DA208 is an ideal analog audio DA for every application and every budget. It lets you avoid RF and hum pick-up problems from noisy, lossy splitters, prevent hard-to-find shorts from multiple taps on critical lines, boost mixer outputs, drive long lines, and eliminate rolloffs and distortion from mismatched load impedances. The DA208 gives you 2 separate 1X4 DAs in a single chassis. Each DA has an LED input clipping indicator and four individual output level trimmers. Outputs are active balan

               

              Read More

              Item #: ATI-DA208

              Availability: Direct Ship From Manufacturer

              Our Price: $650.00

              Add to Wishlist
            • ATI L200 Dual Line Amplifier with Active Balanced Output

              ATI L200 Dual Line Amplifier with Active Balanced Output

              L200 Dual Line Amplifier ideal as a gain block (+28dB), buffer amplifier, impedance converter and line driver.

              ML200 DUAL MICROPHONE TO LINE AMPLIFIER has servo balanced line outputs +22dBm. Switch selection of phantom power and preamp gain for high output microphones and line level inputs. Optional battery packs and DC to DC converters for portability is also available.

              SUM100 SUMMING AMPLIFIER is configured as a stereo to mono summing amplifier with up to 28dB gain available. Features screwdrive

               

              Read More

              Item #: L200-XLR

              Availability: Direct Ship From Manufacturer

              Our Price: $275.00

              Add to Wishlist
            • Rack Mount For ATI AV8 NanoAmp and MicroAmp

              Item #: 21075-501

              Availability: Direct Ship From Manufacturer

              Our Price: $70.00

              Add to Wishlist
            • ATI Wall Mount Power Supply

              ATI Wall Mount Power Supply

              This is a wall-mounting power supply, made specifically for the ATI NanoAmp installation line amplifier series, with a 120VAC/60Hz rating.

               

              Read More

              Item #: WA100-1

              Availability: Direct Ship From Manufacturer

              Our Price: $29.00

              Add to Wishlist
            • DC Power Cable

              DC Power Cable

              Economically display up to twelve critical audio lines in only single rack space. Remote, shared power supplies let you mount these bright three color VU or PPM meters directly under video monitors or critical audio circuits with no possibility of magnetic interference. Available in two channel horizontal with and without phase indication and headphone monitor and also in four channel vertical configurations. Intense, multiple color, ten segment displays are visible even in bright sunslight.

               

              Read More

              Item #: 20602-1

              Availability: Direct Ship From Manufacturer

              Our Price: $15.00

              Add to Wishlist
            • ATI DA1008-2 1X8 Distribution Amplifier metered Plus-22dBm Output Tem Strip I/O

              ATI DA1008-2 1X8 Distribution Amplifier metered Plus-22dBm Output Tem Strip I/O

              With their new higher power outputs (+26dBm) and lower noise (-100dBm EIN) the updated DA1008 and DA2016 Series are ideal for every application and every budget.

              Using either of these units lets you avoid RF and hum pick-up problems from noisy, lossy splitters, prevent hard-to-find shorts from multiple taps on critical lines, boost low console outputs, drive long lines and eliminate roll-off and distortion from mismatched load impedances. These ATI DAs are designed for desktop mounting, and can b

               

              Read More

              Item #: ATI-DA1008-2

              Availability: Direct Ship From Manufacturer

              Our Price: $1,475.00

              Add to Wishlist
            • ATI DA103 1X3 Distribution Amp w/Plus-22dBm Servo Balanced Outputs

              ATI DA103 1X3 Distribution Amp w/Plus-22dBm Servo Balanced Outputs

              A 1x3 Distribution Amplifier with Phoenix I/O connections. An inexpensive high performance amplifiers designed to split and isolate audio signal lines.

              The DA103 accepts a line level input, balanced or unbalanced audio at -20, -10 or +4dBu nominal and provides a line level output at +4dBm nominal level to balanced or unbalanced output lines. The DA103 input/output connectors are two piece solderless "Phoenix" types, individual for each input and output line.

              The DA103 accepts a maximum line input


               

              Read More

              Item #: ATI-DA103

              Availability: Direct Ship From Manufacturer

              Our Price: $425.00

              Add to Wishlist
            • ATI DA206 Dual 1X3 Distribution Amplifier with Plus-22dBm XLR I/O

              ATI DA206 Dual 1X3 Distribution Amplifier with Plus-22dBm XLR I/O

              The DA206 is an ideal analog audio DA for every application and every budget. It lets you avoid RF and hum pick-up problems from noisy, lossy splitters, prevent hard-to-find shorts from multiple taps on critical lines, boost mixer outputs, drive long lines, and eliminate roll-offs and distortion from mismatched load impedances.

              The DA206 gives you 2 separate 1X3 DAs in a single chassis. Each DA drives a master input gain adjustment and three individual output level trimmers. Outputs are active ba

                 

                Read More

                Item #: ATI-DA206

                Availability: Direct Ship From Manufacturer

                Our Price: $785.00

                Add to Wishlist
              • ATI DA412 Quad 1X3 Distribution Amplifier with Plus-22dBm XLR I/O

                ATI DA412 Quad 1X3 Distribution Amplifier with Plus-22dBm XLR I/O

                The DA412 is an ideal analog audio DA for every application and every budget. It lets you avoid RF and hum pick-up problems from noisy, lossy splitters, prevent hard-to-find shorts from multiple taps on critical lines, boost mixer outputs, drive long lines, and eliminate rolloffs and distortion from mismatched load impedances.

                The DA412 gives you 4 separate 1X3 DAs in a single chassis. Each DA drives a master input gain adjustment and three individual output level trimmers. Outputs are active bal

                 

                Read More

                Item #: ATI-DA412

                Availability: Direct Ship From Manufacturer

                Our Price: $1,125.00

                Add to Wishlist
              • ATI MMA800-1 8-Ch Mic-to-Line Amp w/Transformer Balanced Output

                ATI MMA800-1 8-Ch Mic-to-Line Amp w/Transformer Balanced Output

                The ATI MMA800-1 gives you eight individual mic channels of amplification. Each channel accepts up to -20dBu without clipping. Up to 84dB of gain is available to boost mic levels to up to +24dBm and provide 600 ohm line levels with true transformer balanced outputs. Use these versatile units as microphone, line buffer, IHF consumer interface, audio distribution and level matching amplifiers. Drive headphones or interface phone lines. Combine channels with rear connector jumpers to form stereo su

                 

                Read More

                Item #: ATI-MMA800-1

                Availability: Direct Ship From Manufacturer

                Our Price: $1,325.00

                Add to Wishlist
              • ATI PB2X8 Pressbox 2 IN Mic-to-Line Mixer with 16 Out DA

                ATI PB2X8 Pressbox 2 IN Mic-to-Line Mixer with 16 Out DA

                The PB2X8 "Press Box" provides two high quality XLR inputs, which can be individually switched or mixed into any of eight isolated line level outputs. Each input may be individually switched for microphone or line levels with phantom power and low cut filters available for the microphone inputs.

                A calibrated test tone oscillator can be switched in place of either input for system test and level checks. A bargraph LED display meters any of the eight outputs or either input. The meter may be switch

                 

                Read More

                Item #: ATI-PB2X8

                Availability: Direct Ship From Manufacturer

                Our Price: $1,975.00

                Add to Wishlist
               

              Page:

              ►►
                ◄◄
                 
                 
                 
                 

                ATI manufactures a line of broadcast audio, sound reinforcement and professional audio equipment including digital and analog distibution amplifiers, headphone amplifiers, field mixers, sample rate converters, summing amplifiers and audio metering equipment.

                Markertek is an authorized dealer for the entire ATI Audio line. If you don't see what you're looking for, contact us and we'll do our best to get it for you.