Where to Buy ESE | Countdown Timers | GPS Clocks

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

ESE DV-222 Dual 1 x 4 3G/HD/SD SDI Reclocking Distribution Amplifier
Item# ESE-DV-222
The ESE DV-222 is an SDI digital video (3G, HD & SD) Dual 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-222 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-222...
Our Price: $749.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-410 GPS Based Frequency Generator
Item# ESE-ES-410
The ES-410 generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form, four Sine Wave and four Square Wave outputs are provided. The 1 PPS output is a 50% duty, 5 volt logic signal, positive-edge coinciding with the UTC seconds change. An ESE TC90 Time Code output is also provided for driving remote time displays. A USB interface allows configuration...
Our Price: $1,764.24
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-160F/NTP6 Master Clock w/ NTP6 Opt - NTP Server Allows Sync of Computer networks & LAN Control - IPv6 Compatible
Item# ES-160F-NTP6
The ESE ES-160F-NTP6 is a crystal-based Master Clock / Time Code Generator with the NTP6 Option. NTP Time Server: Network Time Protocol Output with IPv6 & Network Control input via Ethernet (10/100Base-T, RJ-45). The unit employs a temperature compensated crystal oscillator (TCXO) which provides the ES-160F with an accuracy of one second per month. Six .56" yellow LED's display the real time or date while the unit simultaneously generates several types of time code. The unit provides a Coin...
Our Price: $2,039.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-976 Time Code Remote Display - Red LED
Item# ESE-ES-976
The ES-976 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 43" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time Code (TC76, TC89, or TC90), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud). The ES-976 will automatically determine which code is being received. If receiving ESE Time Code from a timer, the unit...
Our Price: $1,100.66
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-455/SD/1 HD & SD SMPTE Time Code Reader/Video Inserter
Item# ESE-HD-455-SD-1
The HD-455/SD/1 is an HD & SD Timecode Reader/Video Inserter. The unit reads SMPTE-LTC/EBU (bi-directionally from 1/30th to 20x play speed), D-VITC or RP-188 and inserts that timecode onto an SDI video signal. The timecode can also be embedded into the D-VITC or RP-188. Error detection/correction for LTC may be enabled for reading analog audio tracks, or disabled for reading SMPTE Up/Down Timers. Additionally, up to 30 characters of user defined text may be inserted into the...
Our Price: $1,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 103F GPS Master Clock/Time Code Generator - IRIG-B / ASCII (RS-232 & USB) - 1 3/4 Inch Rackmount
Item# ESE-ES-103F
The ESE ES-103F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-103F generates several types of time code including ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-103F to easily interface with new or existing computers, automation and clock systems. A...
Our Price: $1,559.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Remote Display - RED LED Display
Item# ES-943U
4 Colors Available
The ESE ES-943U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the...
Read More
Our Price: $831.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-251 1x24 RS-232 Distribution Amplifier
Item# ESE-251
The ES-251 is an RS-232-C Isolation and Distribution Amplifier. Three 1 x 8 amplifier circuits allow the incoming signal to be distributed via the 24 outputs. The unit receives RS-232-C and buffers the signal so that each of the 24 outputs can drive a single "user" at a distance of up to 50 feet (per output). All inputs and outputs are via rear mounted terminal DB-9 connectors. The two main purposes of the ES-251 are to: 1) improve the distribution capabilities of RS-232-C 2) provide isolation...
Our Price: $1,420.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-289E/P/UL Time Code Referenced NTP Time Server with 19 Inch Rack Mount and UL Approved Wall Mount Power Supply
Item# ESE-ES-289E-P-UL
The ES-289E provides a practical method of putting accurate time information onto a network. The unit reads ESE or SMPTE/EBU time codes. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-289E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-289E is an IPV4/IPV6 compatible NTP Time Server. NTP clients can...
Our Price: $1,096.05
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display in Wall Mount Enclosure w/ Option NTP-C
Item# ESE-ES-943U-NTP
The ESE ES-943U/NTP-C is a Time Code display featuring 4.0" bright red LED displays & Option NTP-C (. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP...
Our Price: $885.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-250 1x24 RS-232 ASCII Distribution Amplifier
Item# ESE-ES-250
The ES-250 is an RS-232-C Isolation and Distribution Amplifier. Three 1 x 8 amplifier circuits allow the incoming signal to be distributed via the 24 outputs. The unit receives RS-232-C and buffers the signal so that each of the 24 outputs can drive a single “user” at a distance of up to 50 feet (per output). All inputs and outputs are via rear mounted terminal block connectors. The two main purposes of the ES-250 are to: 1) improve the distribution capabilities of RS-232-C 2) provide isolation...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-212 1x12 3G/HD/SD SDI Digital Video Distribution Amplifier
Item# ESE-DV212
The DV-212 is an SDI digital video (3G, HD & SD) 1 x 12 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-212 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-212 is completely...
Our Price: $850.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 996U NTP-C P 6-Digit Clock with NTP-C with 2.3in High Red LED Display and 19 Inch Rack Mount Option
Item# ESE-ES-996UNTPCP
The ESE ES-996U/NTP-C-P is an NTP Time Display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. Included Option: P: 19" Front Panel (Rack Mount): Designed for mounting...
Our Price: $720.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-210 Quad 1x6 10 MHz Distribution Amplifier
Item# ESE-ES-210
The ESE ES-210 provides four independent 1x6 Frequency DA's in a single rack-mount enclosure. Each DA has loop-thru inputs and six isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain controls are provided on the front of the case. The Gain control provides an overall signal level adjustment of -1.6 to +3.4 db. Unused outputs need not be terminated. Features: Four Independent Amplifier Channels BNC connectors Loop-thru output 6 isolated outputs per channel...
Our Price: $660.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U-NT 2.3 Inch 6-Digit (Hr Min & Sec) ESE/SMPTE/EBU/ASCll Time Display 12 Inch - Red
Item# ES993U-NTPCPOE-R
The ESE ES-993U/NTP-C is an NTP Time Display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 12" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. *Note: This version is the ES-993U with...
Our Price: $653.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX 5112U-NTP-C/PoE Self-Setting 12 Inch Analog Clock with NTP-C/PoE Option
Item# ESE-LX5112UNTPCP
The LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time Code. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact...
Our Price: $588.87
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-996U 2.3 6 Digit Serial Slave
Item# ES 996U
The ES-996U is a Time Code display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts, via the rear-mounted terminal block (BNC connector on rack-panel units), either ESE Time Code™ (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-996U will automatically determine...
Our Price: $650.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Display - Wall Mount Enclosure Time Code Remote Display
Item# ES 993U
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine...
Our Price: $598.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-246/BNC Quad 1x6 SMPTE-LTC/IRIG Distribution Amplifier - BNC Option
Item# ES-246-BNC
The ES-246/BNC is a Quad 1 x 6 SMPTE-LTC / IRIG Time Code Distribution Amplifier. It is housed in a 1.75" x 19" rackmount panel and chassis (the chassis extends 4.8" behind the panel). Each amplifier provides a loop-thru input and six 600 ohm outputs. The inputs and outputs are connected via the rear mounted BNC connectors. The ES-246/BNC is a transformerless design that takes a single unbalanced input and provides six unbalanced single ended outputs. The output levels for each of the four inputs...
Our Price: $542.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier
Item# ES-249
The ES-249 is designed to accept an RS232C/ASCII signal and output up to eight identical copies.The unit has a single input and eight outputs that are accessible on rear-mounted 9-pin D-sub connectors. Due to the nature of the RS232Csignal, if long runs of cable are required, it may be necessary to distribute a different time code that is then "translated" into RS232C/ASCII before entering the "user." Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362UE/N/P 100 Minute Master Up/Down Timer with N and P options
Item# ESE-ES-362UE-N-P
The ESE ES-362UE is a 100 Minute Up/Down Timer. It is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely control...
Our Price: $489.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 247E Quad 1x6 Rack Mount Composite Video DA 1 RU w/ Option - CLEAR (Silver faceplate) - BNC Connectors
Item# ES 247E
2 Colors Available
The ESE ES-247E Provides four independent 1x6 Video DA's in a single rack-mount enclosure. Each DA has loop-thru inputs and six isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should...
Read More
Our Price: $470.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 362UEP 100 Minute Up-Down Timer with Rackmount Option
Item# ESE-ES-362UEP
The ESE ES-362UE is a 100 Minute Up/Down Timer. The ES-362UE is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely...
Our Price: $463.55
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-208A 1x12 Video Distribution Amplifier
Item# ESE-ES-208A
The ESE ES-208A provides a loop-thru input and twelve isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of -2 to +3.4 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused outputs need not...
Our Price: $285.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 808/120 8 Port Power Injector for Power over Ethernet/120 Watt Power Supply
Item# ESE-ES-808-120
ESE ES 808/120 is an 8-port Power Injector for Power over Ethernet (PoE) devices. The unit accepts an Ethernet data signal and passes through the identical signal along with 48 VDC "injected" into the RJ-45 Ethernet connector using the Spare Pair. This unit injects power passively. Applied voltage is available all the time, there is no autonegotiation with the attached client device. These devices have no switching function - there is no configuration needed, and VLANs and other management...
Our Price: $170.30
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE CA-TNCM-TNCF-50 TNC Male to TNC Female Antenna Extension Cable - RG58 - 50 Foot
Item# CA-TNCM-TNCF-50
ESE offers Antenna Extension Cables to be used with GPS Master Clock Systems, specifically, to extend the cable run between the GPS Antenna and the Master Clock. These cables are made with RG-58 coaxial wire with an impedance of 50 Ohms. The CA-TNCM/TNCF50 is a 50 Foot TNC Male to TNC Female Cable Features: Specifications:
Our Price: $270.00
Availability: In Stock
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code.
Item# ES 101
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-103U Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code. 9 Yellow LED Digits .56 Inch
Item# ES 103U
The ES-103U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... IRIG-B, ASCII (RS-232C & USB), SE-TC89 and ESE-TC90. Nine amber LED displays (.55") provide a digital display of the Day of Year, Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard...
Our Price: $1,562.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-126U Time and Date Remote Display
Item# ES 126U
The ES-126U/ES-127U are Time Code displays featuring .56" high (ES-126U) or 1" high (ES-127U) yellow LED displays. Both Time and Date are displayed. The units are housed in a rack mount panel & chassis assembly. The ES-126U is one rack unit high (1.75") while the ES-127U measures two rack units high (3.5"). The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may...
Our Price: $551.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-161U Universal Time Code Reader - 6-digit - .56 inch Amber LED in Desk Mount Enclosure
Item# ES 161U
The ES-161U/LX-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display...
Our Price: $218.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure
Item# ES 166U
2 Versions Available
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Read More
Our Price: $337.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 194U Desk Top Master Clock With HR Option
Item# ES 194U-HR
Designed as an economical alternative to the more "sophisticated" Master Clock, the ES-194UE has proven its value time and time again. This unit feature a .56" six-digit yellow LED display and an ESE Serial Time Code output (capable of driving up to 100 Slaves at a distance of up to 4000 feet). Accessible on the rear mounted 9-pin D-sub connector are a 1 PPS Output, remote access to the two setting controls (Set and Select) and an External Sync Input (capable of synchronizing the unit with an external...
Our Price: $304.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 201 1X4 Video Distribution Amplifier w/ Separate Gain & EQ Controls
Item# ES 201
2 Versions Available
The ESE ES-201 provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. An independent screwdriver-adjustable Gain and Equalization control for each output are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector....
Read More
Our Price: $280.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 206U Stand-Alone Video Time/Date Generator & Inserter
Item# ES 206U
2 Color Available
The ES-206U is a "stand-alone" Video Time/Date Generator & Inserter which superimposes Time and Date information onto a looped-thru video signal. The unit generates six digits of date (Month, Day & Year) and six digits of time (Hour, Minute & Second). With the ease of on-screen programming setting the ES-206U is a snap. Controls include Time & Date set and Size, Position & Brightness set. The unit also has several styles of background masks which include, solid characters on video, translucent characters...
Read More
Our Price: $551.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-207A 1x4 Video Distribution Amplifier
Item# ES 207A
The ES-207A provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused outputs need not be terminated....
Our Price: $166.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-209A Video / Audio Distribution Amplifier
Item# ES 209A
The ES-209A is a 1 x 12 Video Distribution Amplifier combined with a 1 x 12 Stereo Audio Distribution Amplifier. It is housed in a rack mounted cabinet which measures 1 3/4" high. Two BNC connectors provide a loop-thru video input; 12 BNC connectors provide isolated outputs. Both unbalanced RCA and balanced XLR audio inputs are provided. An RCA active loop output and 12 RCA DA outputs are provided per channel. All twelve outputs will deliver identical signals, and unused outputs need not be terminated. The...
Our Price: $470.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-216 Audio Level Indicator - Digital VU Meter
Item# ES 216
The ES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that display levels of -20, -10, -7, -5, -3, -1, 0, +1, +2, and +3 db. One LED is lit at a time and simulates the "flying wand" effect of an analog meter. Units are shipped in Peak mode unless otherwise specified (VU response may be specified optionally). The plastic bezel is designed for panel / console mounting....
Our Price: $65.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-216P2 Stereo/Mono Audio Indictator - Digital VU Meter
Item# ES 216P2
3 Versions Available
The ES-216P family consists of one or more Audio Level Indicators mounted on a rack-mount panel. The ES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that display levels of -20, -10, -7, -5, -3, -1, 0, +1, +2, and +3 db. One LED is lit at a time and simulates the "flying wand" effect of an analog meter. Units are shipped in Peak mode unless otherwise...
Read More
Our Price: $180.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-217 Audio Distribution Amplifier Terminal Blocks
Item# ES 217
Amplifiers that accept a balanced or unbalanced audio signal and produce exact copies of that signal. The outputs are isolated and have recessed Gain controls. All inputs and outputs are accessible on terminal blocks for simple "permanent" installations. Or, if option "XLR" is specified, all inputs and outputs are available on XLR connectors for easy disconnect/reconnect. The ES-217 is an Audio DA with four independently adjustable (via the top-mounted Gain controls) outputs,while the ES-218*...
Our Price: $185.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
NTSC/PAL Color Bar Generator
Item# ES 229
The ES-229 Color Bar Generator can be used for aligning monitors or for checking the signal fidelity of a video system. The ES-229 generates RS-170A full-field bars or black-burst. The unit provides one composite output and one S-Video output. If the TONE option is ordered, a 1 KHz tone is output from the rear-mounted RCA connector. Front-panel DIP switches allow selection of Auto-Black, Bars / Black, Interlace / Progressive, NTSC pedestal On / Off, Chroma On / Off and NTSC/PAL mode. The Auto-Black...
Our Price: $280.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 230 NTSC/PAL Color Bar Generator
Item# ES 230
The ES-230 Color Bar Generator can be used for aligning monitors or for checking the signal fidelity of a video system. The ES-230 generates RS-170A full-field bars or black-burst. The unit provides eight composite outputs. If the TONE option is ordered, a sinewave tone is output from the rear-mounted RCA connector at either 1 KHz or 400 Hz. Front-panel DIP switches allow selection of Auto-Black, Bars / Black, Interlace / Progressive, NTSC pedestal On / Off, Chroma On / Off, Tone Frequency and NTSC/PAL...
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-233 Automatic Video Fade-to-Black System
Item# ES 233
2 Versions Available
The ES-233 is an automatic video fade-to-black system. The unit uses a digital attenuator which provides an extremely linear, repeatable fade rate. Fade rates are adjustable between 1 frame and 150 frames via a front panel mounted, ten position selector switch or with Option "D". The video-fade operation is controlled by either the front panel "UP/DOWN" switch or via the remote control inputs of the rear mounted connector. Applications Include: "Live" Video Fades Video Editing...
Read More
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-243 Quad 1 x 6 IRIG Distribution Amplifier
Item# ES 243
The ES-243 is designed to accept any IRIG time code (in its "pulse width coded" form) or any ESE Time Code signal (TC76, TC89 or TC90) and output up to 24 identical copies. The unit has four separate and isolated channels, each with six available outputs. Inputs and outputs are accessible on rear-mounted BNC connectors. Each of the four channels has a loop-thru input that allows the input signal to be "looped" from one channel into the next, so that up to 24 identical copies can be created. Each...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-244P Audio Level Impedance Interface w/ Option P - Front Panel Rack Mount
Item# ES 244P
The ESE ES-244 is a stereo, bi-directional coupling unit. Provides and easy means of connecting equipment with balanced, +4 or +8dBm inputs/outputs. Housed in a rugged, black anodized aluminum enclosure measuring 7"W x 1.6"H x 5"D. The amplifier section receives the unbalanced audio via the two RCA connectors & converts it to balanced, accessible on the two male XLR connectors. Adjustable gain from +6 to +20dB on each channel. Applications Include: Unbalanced Computer Sound Cards to Pro...
Our Price: $228.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-245 Quad 1x6 SMPTE/EBU DA
Item# ES 245
The ESE ES-245 is a Distribution Amplifier designed to distribute and isolate most any audio signal including SMPTE and EBU time code. Four channels, each with six outputs, provide up to 24 identical copies. Inputs and outputs are available on the rear mounted terminal blocks (optional XLR connectors are available). The unit is rack mounted. Since the early '80s, ESE's Audio and Video Distribution Amplifiers have been recognized for their broadcast quality and durability. Using very similar...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE 266U Time Code Driven Video Time/Date Generator
Item# ES 266U
The ES-266U is a Video Time and Date "Inserter" which decodes either ESE or SMPTE Time Code (selectable via an internal DIP switch). Six digits of Time (Hr, Min, Sec) and six digits of Date (Month, Day, Year) are then superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size and Position, Mask Mode (black background on/off and transparent or solid display), Display Mode (Side-by-Side / Stack / Time Only / Date Only), 12/24 Hour mode...
Our Price: $707.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-2940 Dual 1 X 4 Audio/Video DA With 5 Black Burst Sync Outputs
Item# ES 2940
The ES-2940 is a single rack mounted unit which contains two Audio Distribution Amplifiers, two Video Distribution Amplifiers and a five output RS-170A Black Burst Sync Generator (BBSG). The unit is designed to meet the requirements of systems which must interface with, distribute and synchronize video and audio signals. Each of the two 1 x 4 Video DA's provide a loop-thru input and four isolated outputs. Screwdriver adjustable Gain and EQ controls are accessible on the front panel, all inputs...
Our Price: $855.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
100 Minute 1/2 Inch High Yellow Digit Up/Down Timer
Item# ES 301U
4 Versions Available
The ES 301U and ES 380A are presentable 100-minute Up/Down Timers. Units are "preset" by advancing the proper digit using the "Min-Set" or "Sec-Set" control. The ES 380A has 1" high yellow LED displays and is controlled via rear mounted connectors, while the ES 301U has .55" high yellow LED displays and has six front mounted controls. NOTE: PLEASE CALL BEFORE ORDERING FOR CUSTOMIZATION!! THANK YOU Features: .55" Yellow LED Display 100 Minute Up / Down count range (00:00 -...
Read More
Our Price: $308.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES572U 12 Hour 7/16 Inch Digit Clock Timer
Item# ES 572U
3 Versions Available
The ES 572U (12 Hour) and ES 574A (24 Hour) are 6-digit "Clock/Timers" with .4" high red LED displays and are designed for console mount applications. All controls are accessible on the rear mounted edge-card connector. Otherwise, the unit is similar in function and operation to the ES 562F / ES 564F. Front mounted switches are optional. Built-in "UP" Timer.
Read More
Our Price: $256.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 942 Stand-Alone Clock
Item# ES 942
The ES-942 is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-942 uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Fast, Slow and Hold controls are accessible on the top of the case.
Our Price: $831.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-991UE Digital Time Code Remote Display with Black Anodized Aluminum & Plastic Case
Item# ES 991U
4 Versions Available
The ESE ES-991UE is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date...
Read More
Our Price: $450.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES ANT Active High Performance Dual Filtered Outdoor GPS Antenna for Harsh RF Environments
Item# ES ANT
The ESE ANT is an Indoor/Outdoor Active GPS Antenna optimized for fixed location timing applications that can replace the standard GPS antenna in harsh RF environments. Perfectly suited for harsh RF environments and a similar replacement for Panasonic Marine II antenna. The antenna supplied with ESE GPS Master Clocks is designed to provide excellent reception under a variety of conditions. For best results, the top of the antenna should have at least a partial view (unobstructed line of sight)...
Our Price: $242.49
Availability: In Stock
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Option HR - Relay Contact Closure
Item# ES-101-HR
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $992.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ES 102U GPS Based Time Code Generator (Options K and 10ns)
Item# ES-102U-K-10NS
2 Versions Available
The ES-102U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... SMPTE / EBU, ASCII (RS-232C & USB), ESE-TC89T and ESE-TC90T. Six amber LED displays (.55") provide a digital display of the Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features....
Read More
Our Price: $2,037.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104A GPS Based NTP Time Server with Rack Mount Option
Item# ES-104AP
The ESE ES-104A is a GPS based NTP time server with rack mount option.
Our Price: $1,947.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104E GPS Referenced NTP Time Server
Item# ES-104E
The ESE ES-104E is an IPV4/IPV6 compatible NTP Time Server that allows you to put accurate time information onto your network by receiving GPS time via the supplied antenna. The ES-104E NTP output is delivered on a 10/100 Base-T Ethernet connector. Housed in a rugged black anodized desktop enclosure a voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. Using the ES-104E NTP clients can authenticate...
Our Price: $1,389.85
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104EP GPS Referenced NTP Time Server with Rack Mount Option
Item# ES-104EP
The ESE ES-104EP provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104EP is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-104EP is an IPV4/IPV6 compatible NTP Time Server. NTP...
Our Price: $1,427.63
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104E-P-J GPS Based NTP Time Server with 19 Inch Front Panel Rackmount & 220 VAC/50 Hz Operation Option
Item# ES-104EPJ
The ESE ES-104E-P-J provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-104E is an IPV4/IPV6 compatible NTP Time Server. NTP...
Our Price: $1,395.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-160E Crystal Controlled Master Clock/Time Code Generator
Item# ES-160E
2 Colors Available
The ES-160E is a Master Clock/Time Code Generator. The unit employs a voltage controlled/temperature compensated crystal oscillator which provides the ES-160E with an accuracy of one second per month. Six .56" yellow LEDs display real time while the unit simultaneously generates several types of time (and date) code (SMPTE-LTC/EBU, ESE-TC89, ESE-TC90 and RS232C/ASCII) and a 1 PPS signal. An optional ethernet NTP (Network Time Protocol) port may be specifi ed (ES-160E/NTP6) allowing the clock to...
Read More
Our Price: $1,667.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-161UE/P/NTP-C .55-Inch 6-Digit ESE/SMPTE/EBU/ASCII Serial Slave - Desk Top - Amber LED(9) with 19Inch Rack Mount
Item# ES-161UE-P-NTP-C
The ES-161UE/P/NTP-C is a Time Code display featuring .56" yellow LED displays with the NTP-C Option: NTP Client: NTP Client Displays synchronize exclusively with an NTP server (replaces all standard inputs). This also come with the P Option: 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™,...
Our Price: $329.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES161UE/NTP-C/UL NTP Time Display with UL Approved Power Supply
Item# ES-161UENTP-C-UL
The ES-161UE/NTP-Cis an NTP Time Display featuring .56" high Yellow LED displays. The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. With additional options, the ES-161UE/NTP-C can function as a Time Code Converter. If Option RS is ordered, an RS-232C or RS-422A/RS-485 ASCII output is provided....
Our Price: $315.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE .55 Rack Mount Serial Slave Clock Black Case
Item# ES-161UP-BLACK
The ES-161U/LX-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure / Option P
Item# ES-166UP
2 Colors Available
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Read More
Our Price: $410.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
12 Hour 7/16 High Red Digit Real Time Clock
Item# ES-172U
2 Colors Available
The ES 172U (12 hour) and ES 174A (24 hour) are 6-digit clocks with .4" high bright red LED displays and are designed for console mount applications. Fast, Slow & Hold controls are accessible on the rear mounted connector. Front mounted switches are optional.
Read More
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator
Item# ES-185F
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $2,370.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator - w/ Options NTP6/ANT/K
Item# ES-185FNTP6ANTK
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $3,209.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-188J NTP Referenced Master Clock/Time Code Generator with 220 VAC/50 Hz Operation Option
Item# ES-188-J
The ES-188 is an NTP referenced Master Clock and Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188 generates several types of time code including SMPTE LTC, ESE-TC89, ESE-TC90, ASCII (RS-232C & USB), EBU, IRIG-B and a 1PPS signal. These outputs allow the ES-188 to easily interface with new or existing computers, automation and clock systems. Option J is a 220 VAC/50 Hz...
Our Price: $2,085.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-188E-NTP6 Master Clock with NTP Server
Item# ES-188E-NTP6
The ES-188E/NTP6 is an NTP referenced Master Clock and Time Code Generator/NTP Server. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188E generates several types of time code including SMPTE LTC, ESE-TC89, ESE-TC90, ASCII (RS-232C & USB), EBU, IRIG-B and a 1PPS signal. These outputs allow the ES-188E to easily interface with new or existing computers, automation and clock systems. The NTP Server...
Our Price: $2,425.27
Availability: In Stock
Add to Wish List
ESE ES-188E Master Clock - NTP Referenced - 1 Percent Rack Mount with UL Option
Item# ES-188E-UL
The ES-188 is an NTP referenced Master Clock and Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188 generates several types of time code including SMPTE LTC, ESE-TC89, ESE-TC90, ASCII (RS-232C & USB), EBU, IRIG-B and a 1PPS signal. These outputs allow the ES-188 to easily interface with new or existing computers, automation and clock systems. Software supplied with the...
Our Price: $2,076.97
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-192UE Master Clock (6-Digit 12 Hour)
Item# ES-192U
2 Versions Available
The ESE ES-192UE (12 hour) is a low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the LX-192UE, the ES-192UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time & Date data are output to Slave displays via the TC90 Time Code output. The unit automatically compensates for Daylight Saving Time but this may be defeated by means of an internal solder jumper. Features: .56" Yellow...
Read More
Our Price: $256.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-214 - Vertical Audio mini-Panel Mount
Item# ES-214
The ES-214 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode unless otherwise specified (Fast or Slow Averaging may be specified optionally). The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio...
Our Price: $137.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-215 Horizontal Audio Level Indicator & Rack Mount In-Line VU Meter w/ 14 LEDs
Item# ES-215
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $137.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215H ESE ES-215HP2 Dual Horizontal Audio Level Indicators & Rack Mount In-Line VU Meters
Item# ES-215HP2
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $351.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215P Horizontal Audio Level Indicator & Rack Mount In-Line VU Meter w/ Option P & 14 LEDs
Item# ES-215P
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $190.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215P2 Dual Horizontal Stacked Audio Level Indicators & Rack Mount In-Line VU Meters
Item# ES-215P2
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $351.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215P3 Triple (Stereo/Center) Horizontal Audio Level Indicators & Rack Mount In-Line VU Meters w/ Option P
Item# ES-215P3
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $513.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215P3 Quad Horizontal Audio Level Indicators & Rack Mount In-Line VU Meters w/ Option P
Item# ES-215P4
The ES-215 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail leads are provided for Hard Wiring Power and Audio hookup. The unit measures 7"W x 1.5"H x 3.5"D. ESE offers two basic versions...
Our Price: $650.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-215P6 Triple Stereo Audio Level Indicator 1 3/4in Rack Mount
Item# ES-215P6
The ES-215P family consists of one or more Audio Level Indicators mounted on a rack-mount panel. The indicators provide a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode unless otherwise specified (Fast or Slow Averaging may be specified optionally). Four pigtail leads are provided from each meter...
Our Price: $926.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-217 Audio Distribution Amplifier with XLR Option
Item# ES-217XLR
The ESE ES-217XLR is an Audio Distribution Amplifier that accepts a balanced or unbalanced audio signal and produces four exact copies of that signal. The outputs are isolated and have recessed Gain controls. All inputs and outputs are available on XLR connectors for easy disconnect/reconnect. The terminal blocks are replaced with XLR connectors (the enclosure is doubled in height). Features: 4 isolated outputs Terminal Block or XLR version available Balanced or Unbalanced connections...
Our Price: $304.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-219A RS-170A Black Burst Generator with 4 Outputs
Item# ES-219A
4 Versions Available
The ESE ES-219A is a Black-Burst/Sync Generator with four isolated outputs. The unit provides a dependable and stable composite black-burst signal for pre-blacking tapes and/or for general synchronization purposes. The output signal of the ES-219A consists of sync, blanking, reference black setup level and color burst which is SCH phased. Subcarrier frequency and SCH phase may be adjusted if desired. Features: Low-cost Black-Burst/Sync Generator 4 Isolated RS-170A Black-Burst...
Read More
Our Price: $185.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-244 Bi-Directional Audio Level Impedence Interface
Item# ES-244
The ESE ES-244 is a stereo, bi-directional coupling unit. Provides and easy means of connecting equipment with balanced, +4 or +8dBm inputs/outputs. Housed in a rugged, black anodized aluminum enclosure measuring 7"W x 1.6"H x 5"D. The amplifier section receives the unbalanced audio via the two RCA connectors & converts it to balanced, accessible on the two male XLR connectors. Adjustable gain from +6 to +20dB on each channel. Applications Include: Unbalanced Computer Sound Cards to Pro...
Our Price: $175.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-244P2 Bi-Directional Audio Level Impedence Interface w/ P2 Option - Dual Rack Mount
Item# ES-244P2
The ESE ES-244 is a stereo, bi-directional coupling unit. Provides and easy means of connecting equipment with balanced, +4 or +8dBm inputs/outputs. Housed in a rugged, black anodized aluminum enclosure measuring 7"W x 1.6"H x 5"D. The amplifier section receives the unbalanced audio via the two RCA connectors & converts it to balanced, accessible on the two male XLR connectors. Adjustable gain from +6 to +20dB on each channel. Applications Include: Unbalanced Computer Sound Cards to Pro...
Our Price: $422.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE Quad 1x6 Rack Mount Audio Distribution Amplifier
Item# ES-246
The ES-246 is a quad 6-output Audio DA with 24 independently adjustable (via the front-mounted Gain controls) outputs, while the ES-246 has four Gain controls (one per input channel). The unit is a transformerless design and each of the four channels accepts a balanced or unbalanced audio signal that provides six exact copies. If unbalanced outputs are desired, up to twelve separate and isolated feeds can be made per channel. An input termination switch (between 600. and 100K.) is also provided...
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 246 Quad 1x6 Rack Mount Audio Distribution Amplifier with XLR Option - 110-120 VAC
Item# ES-246-XLR
The ESE ES-246-XLR is a Quad 1x6 Audio Distribution Amplifier that accepts a balanced or unbalanced audio signal and produces exact copies of that signal. The outputs are isolated and have recessed gain controls. This unit is the ES 246 with Option XLR, all inputs and outputs are on XLR connectors for easy disconnect/reconnect. Features: 4 independent isolated amplifiers, each with six outputs XLR Input & Output Variable Gain, front panel adjustable for each amplifier,...
Our Price: $669.29
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-263 Portable SMPTE Time Code Generator
Item# ES-263
The ESE ES-263 is a portable, presettable SMPTE Time Code Generator. The microprocessor-based unit can be preset using the front panel mounted controls (only hours and minutes are presettable as seconds and frames are automatically set to 00:00). The ES-263 can generate Time Data or User Bits (User Bits are presettable with hexadecimal values "0 - F"). SMPTE Time Code (unbalanced) is output via a rear mounted RCA and the Video Sync Input (composite video or sync) is via a rear mounted...
Our Price: $395.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-267 LTC to VITC Converter
Item# ES-267
The ES-267 is designed to read SMPTE or EBU Longitudinal Time Code (EBU is selectable via an internal DIP switch) and convert it to Vertical Interval Time Code, inserted into video looped-thru the unit. An internal DIP switch provides selection of the VITC video lines. Features: Reads SMPTE/EBU LTC Time Code Outputs SMPTE/EBU VITC Time Code Balanced XLR Input 75 Ohm BNC Video Loop-thru Optional Rack Mount Various Options available: Black(1), J, P, P2, UL, W(1)
Our Price: $280.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-274U IRIG-B to SMPTE Converter
Item# ES-274U
3 Versions Available
The ESE ES-274U is a Time Code Converter that automatically synchronizes (Jam Syncs) to IRIG-B Time Code and outputs SMPTE timecode. EBU Time Code is optionally available. The unit allows video tape (previously striped with IRIG-B) to be more easily edited using SMPTE (EBU) editing equipment. Features: Video loop-thru and Color Frame inputs for SMPTE video sync Balanced or unbalanced SMPTE output (XLR) Drop-Frame or Non Drop-Frame modes Wide range (100 mVPP - 10 VPP) AGC input...
Read More
Our Price: $1,420.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-289E Time Code Based NTP Time Server
Item# ES-289E
The ES-289E provides a practical method of putting accurate time information onto a network. The unit reads ESE or SMPTE/EBU time codes. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-289E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-289E is an IPV4/IPV6 compatible NTP Time Server. NTP clients can authenticate...
Our Price: $916.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-299EP IRIG Based NTP Time Server
Item# ES-299EP
The ESE ES-299EP provides a practical method of putting accurate time information onto a network. The unit reads IRIG A, B, E and NASA36 time codes (Carrier or TTL). The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-299E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-299E is an IPV4/IPV6 compatible NTP Time...
Our Price: $1,898.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-302U 100 Minute Up/Down Timer
Item# ES-302U
The ES-302U is a 100 Minute Up/Down Timer. The timer is presetable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. If the relay contact closure option is ordered, the contacts are accessible on a rear-mounted DB-9 connector. Options List (10nS) 10nS Accuracy: The accuracy of the unit is improved to 10nS. List: $300 (Black)Black Anodized Front...
Our Price: $399.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362U Up/Down Timer with Serial Output
Item# ES-362U
The ES 302A is a presetable 100 minute up/down timer with .56" yellow LED displays. Units are "preset" using a lever wheel switch and controlled by five front mount controls. The ESE Serial "Timer" Code output is a BNC connector and is capable of driving 100 ESE Serial "Timer" Code Slaves. Features: .56" Yellow LED Display 100 Minute Up/Down count range (00:00 - 99:59) Thumb wheel Preset ESE Timer CodeT output Remote Control input Optional relay-contact closure output at zero Optional Stop...
Our Price: $400.00
Availability: In Stock
Add to Wish List
ESE ES-362U Up/Down Timer with Serial Output (Rackmount Option)- Black
Item# ES-362UP-BLACK
The ES-362U is a 100 Minute Up/Down Timer. The ES-362U is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely...
Our Price: $479.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-371 100 Min Up/Down Timer Console Mt w/Remote Control Thumbwheel Preset
Item# ES-371
The ES-371 is a 100 Minute Up / Down Timer in a console-mount enclosure. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable.
Our Price: $413.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-372U Console Mount Time Code Slave Display
Item# ES-372
The ES-372U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. The ES-372U will automatically determine which code is being received. Rear-mounted connector terminals provide access to various mode functions, such as Time Zone offset, 12/24 Hour format, display blanking and Date display (if incoming time code contains Date information, such as ESE TC90...
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-380UEP 100 Minute Up/Down Timer with Rack Mount & CLEAR Options
Item# ES-380U
2 Colors Available
The ESE ES-380UEP is a 100 Minute Up/Down Timer in a19" rackmount front panel. Up, Down, Stop, Minute-Set, Second-Set and Reset control inputs are accessible on the rear connector. Features: 1" Yellow LED Display 100 Minute Up/Down count range (00:00 - 99:59) Up, Down, Stop, Min-Set, Sec-Set & Reset Inputs Optional Remote Control Plate (option "D") 220-240 VAC (110-120 VAC is standard) & UL options available
Read More
Our Price: $400.66
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-381U 100 Minute Up/Down Timer with Remote
Item# ES-381U
2 Colors Available
The ESE ES-381UE is a 100 Minute Up/Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 1" Amber LED display 100 Minute Up/Down count range (00:00 - 99:59) Thumbwheel Time preset Up, Down, Stop, Reset & Preset functions Remote Control Input/Control Plate Optional 3.5" rackmount enclosure (Option "P") 220-240 VAC...
Read More
Our Price: $546.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 391U 2.3 Inch 100 Minute Up/Down Timer
Item# ES-391U
The ES-391U is a 100 Minute Up / Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 2.3" Yellow LED Display 100 Minute Up / Down count range (00:00 - 99:59) Thumbwheel Time Preset Up, Down, Stop, Reset & Preset functions Remote Control Input / Control Plate Optional 5.25" Rackmount enclosure (option "P") 220-240 VAC (110-120 VAC...
Our Price: $641.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 391U 2.3 Inch 100 Minute Up/Down Timer with Options ESE & RED
Item# ES-391U-ESE-RED
The ES-391U is a 100 Minute Up / Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 2.3" Red LED Display 100 Minute Up / Down count range (00:00 - 99:59) Thumbwheel Time Preset Up, Down, Stop, Reset & Preset functions Remote Control Input / Control Plate ESE Time Code Output: An ESE Time Code output is provided allowing the unit...
Our Price: $669.75
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-443U SMPTE / EBU Timecode Display
Item# ES-443U
This eight digit display unit is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/15 to 3x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may...
Our Price: $1,116.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-453UE SMPTE/EBU Timecode Display
Item# ES-453U
2 Versions Available
The ESE ES-453UE is a microprocessor-based SMPTE Time Code display. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. If the ESE Time Code Output option is ordered on the ES-453UE, a rear-mounted BNC connector will provide access...
Read More
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-455SMPTE Time Code Reader / Video Inserter
Item# ES-455
The ES-455 is a microprocessor-based unit which read and video insert SMPTE time code. All controls are front panel mounted while the inputs and outputs are accessible via rear mounted connectors. The ES-455 reads bi-directionally at multi-speed (1/30 to 20x play speed). Position, Size & Brightness controls for the video insert are provided on the ES-455. Features: "Hold" control Reads Time or User Bits (front panel selectable) Inserts white characters on black window Bi-directional, 1/30 to...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-455U SMPTE Time Code Reader and Video Inserter
Item# ES-455U
The ES-455U from ESE is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours, Minutes, Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size, Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked,...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 461U SMPTE/EBU(3) Time Code Generator/Jam Sync-1 3/4in Rack Mount
Item# ES-461U
The ES-461U is a SMPTE/EBU Time Code Generators. Front panel thumbwheel switches allow the user to preset the unit's Hours, Minutes and Seconds (Hours & Minutes only on the ES-263) or User Bits. Each unit accepts composite video or composite sync and operates in drop frame or non-drop frame mode. Features include a video sync input, a color frame pulse input and a clock "Hold" function. The ES-461U is a microprocessor-based, presettable SMPTE Time Code Generator. SMPTE Time or User Bits...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-463U SMPTE / EBU Timecode Display
Item# ES-463U
This eight digit display unit is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/15 to 3x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 466 SMPTE/EBU Presettable Up/Down Timer
Item# ES-466
The ES-466E is an eight digit, presettable 24 hour SMPTE Up/Down Timer (00:00:00:00 - 23:59:59:29) with five front panel mounted controls (UP, DOWN, STOP, RESET and PRESET) and an eight digit display. All displays are 0.56" amber LED digits. A SMPTE output is provided on the rear panel XLR connector. The "Bit Order Forward" toggle switch on the rear panel allows the unit to mimic decks that always output "forward" bit order code. EBU Time code is optional. Features: SMPTE Time Code...
Our Price: $940.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 466 SMPTE/EBU Presettable Up/Down Timer with Rack Mount Option
Item# ES-466-P
The ES-466 is an eight digit, presettable 24 hour SMPTE Up/Down Timer (00:00:00:00 - 23:59:59:29) with five front panel mounted controls (UP, DOWN, STOP, RESET and PRESET) and an eight digit display. All displays are 0.56" amber LED digits. A SMPTE output is provided on the rear panel XLR connector. The "Bit Order Forward" toggle switch on the rear panel allows the unit to mimic decks that always output "forward" bit order code. EBU Time code is optional. Features: SMPTE Time Code output, EBU optional...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-488U SMPTE / EBU Time Code Reader - Generator & Video Inserter
Item# ES-488U
The ES-488U is a microprocessor-based unit which can Generate, Read and Video Insert SMPTE time code. All controls are front panel mounted while the inputs and outputs are accessible via rear mounted connectors. If option "R" is ordered, the unit may be remotely operated via RS232 interface to a PC running the Control Panel software. The ES-488U is a combination SMPTE/EBU Time Code Generator, Reader and Inserter. The unit can read and generate both time and user bits, and can operate in either drop...
Our Price: $1,135.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-491VITC Time Code Reader
Item# ES-491
The ES-491 is designed to read and display SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch). Hours, Minutes, Seconds and Frames are displayed. Decimal points on the display indicate the Video Field and Drop-Frame mode. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification...
Our Price: $422.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-493U SMPTE / EBU Timecode Display
Item# ES-493U
This eight digit display unit is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/15 to 3x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may...
Our Price: $802.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UE 60 Minute Master Timer
Item# ES-520U
2 Versions Available
The ESE ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE Timer CodeT output Optional...
Read More
Our Price: $175.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 562U .55in Combo Clock/Up and Down Timer - 12 Hour
Item# ES-562U
The ES 562U (12 Hour) and ES 564F (24 Hour) are 6-digit "Clock/Timers" with .55" high yellow LED displays. Once time of day has been set, the unit can be switched into the "Timer" mode and be used as a 12/24 hour timer. Subsequently, the unit can be "toggled" from the "Clock" mode to the "Timer" mode with no loss of real time or elapsed time. Built-in "UP" timer.
Our Price: $413.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-562U-ESE 0.55-Inch Desktop Combo Clock/Up-Down Timer with ESE Option
Item# ES-562U-ESE
The ES-562U (12 hour)/ES-564U (24 hour) is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case. Features: .56" Yellow LED Display Independent...
Our Price: $441.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 562UE .55 Inch Combo Clock/Up & Down Timer - 12 Hour - Black with Option P 19 Inch Rack Mount
Item# ES-562UE-BK-P
The ESE ES-562UE Option P (12 hour)is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case. Option P - 19" Front Panel (Rack...
Our Price: $465.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-570 60 Minute Up Timer
Item# ES-570
The ES-570 is a 60 Minute Up Timer in a black plastic console-mount case. Start, Stop and Reset control inputs are provided on the rear connector (a momentary closure to Ground is all that is required to activate a function). Front-panel control switches are available as an option. Features: Console Mount Enclosure .4" Red LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input (optional Front Panel switches) 220-240 VAC (110-120...
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ES-736 4-Digit Stand Clock w/10 Outputs & 100 Programmable Events
Item# ES-736
The ES-700 Series is a family of programmable event controllers that provide a number of contact closure outputs at predetermined times. These controllers allow the user to automate multiple events with simple programming. Various Models are available from Time Code Readers (ESE, SMPTE/EBU, IRIG) to Stand-Alone Clocks and Elapsed Timers with Thumbwheel, Keypad or PC Interface programmability. Features: Compares SMPTE / IRIG / ESE Time Code (depending on model) Units Available with Thumbwheel,...
Our Price: $1,135.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE The ES-911/TSM Time Sync Machine Master Clock
Item# ES-911/TSM
The ES-911/TSM is a Stand-Alone (manually settable) Master Clock and Time Code Generator. The unit is specifically designed for a PSAP (Public Safety Answering Point) as a Master Clock and is capable of "Time Synchronizing" all components of a PSAP. The unit displays six digits of time in either 12 or 24 Hour format and utilizes a Quartz timebase for high accuracy. Date information is also available on all time code outputs. The ES-911/TSM generates several types of time code - IRIG-B, IRIG-E,...
Our Price: $916.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-941U Time Code Remote Display
Item# ES-941U
2 Versions Available
The ESE ES-941U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-941U will automatically determine which code is being received. A rear-mounted...
Read More
Our Price: $679.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display w/ Option J 220 volt Operation
Item# ES-943U-J
The ES-943U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch...
Our Price: $859.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display w/ Option W - 3-Wire Power Cord
Item# ES-943U-W
The ES-943U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch...
Our Price: $846.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 962U 2.3 Inch 12 Hour Digital Clock
Item# ES-962U
The ES-962U (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-962U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). Features: 2.3" Red LED Display Viewing Distance 70' 12 hour (ES-962U) or 24 hour (ES-964U) display 220-240 VAC (110-120...
Our Price: $598.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 964U 2.3 Inch 24 Hour Digital Clock
Item# ES-964U
The ES-964U (24 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-964U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). Features: 2.3" Red LED Display Viewing Distance 70' 12 hour (ES-962U) or 24 hour (ES-964U) display 220-240 VAC (110-120...
Our Price: $598.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-992U 12-Hour Six Digit Stand-Alone Clock
Item# ES-992U
2 Versions Available
The ESE ES-992U (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-992U/994U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time Set & Date Display controls are accessible on the top of the case. Features: 2.3" (Hours & Minutes)/1" (Seconds) Yellow LED Display Viewing Distance 70' 12 hour (ES-992U) display 220-240 VAC (110-120 VAC is standard) & UL options available Various...
Read More
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Opt NTP-C & PoE
Item# ES-993U-NTP-CPOE
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine...
Our Price: $653.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Green LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Opt NTP-C & PoE
Item# ES-993UNTPCPOEGR
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) Green LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine...
Our Price: $675.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES AB1A 5 VDC Power Supply for LA-12Fand LA-12FN
Item# ES-AB1A
The ES-AB1A is a 5 VDC power supply for driving up to four Inline GPS Amplifiers (LA12F or LA12FN). An internal isolation circuit directs the power to the antenna and amplifiers while passing only the returning GPS signal to the GPS Receiver. Features: Provides Ample +5 VDC Power for Multiple GPS Inline Amps Connects Between Master Clock and Antenna Cable Rugged Desk Top Enclosure
Our Price: $299.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Blue LED Time Code Reader In Desk Mount Enclosure w/ Options NTP-C - P & PoE
Item# ES166UENTPCPBLUE
The ES-166UE is a Time Code display featuring 1" Blue LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Our Price: $502.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES185E/NTP6/ANT Master Lock - GPS - Better than 10s Accuracy - NTP Time Server with Antenna Option
Item# ES185E-NTP6-ANT
The ESE ES-185E/NTP6 is a GPS Master Clock/Time Code Generator/NTP Time Server. The unit receives accurate time and date information from Global Positioning System satellites and supplies this data to the user in a variety of forms. A 12-channel receiver is employed that is capable of tracking up to twelve satellites simultaneously, although reception of only one is required for time data to be output. ESE's ES-185E/NTP6 offers an accuracy of better than 10nS, and is entirely self-setting....
Our Price: $2,925.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-161UE Universal Time Code Reader & Remote w/ Amber Displays & Options P - NTP-C & UL
Item# ESE-161UEPNTPCUL
The ES-161UE (161UEP-NTPC-UL) is a Time Code display featuring .56" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-161UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format,...
Our Price: $378.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-161UE Universal Time Code Reader & Remote w/ Amber Displays & Options P - TZ & ESE
Item# ESE-161UEPTZESE
The ES-161UEP/TZ/ESE is a Time Code display featuring .56" amber LED displays with the P Option: 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep. This also has the TZ Option: Time Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone. And the ESE Option: ESE Time Code Output: An ESE Time Code output is provided allowing the unit to...
Our Price: $329.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator w/ Option NTP6 / NTP Time Server
Item# ESE-185F-NTP6
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $2,935.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE 192UE-C-P-RS Economy Line-Frequency Master Clock (6-Digit 12 Hour) - Stand Alone - Crystal Time - 19 Inch Rack Mount
Item# ESE-192UE-C-P-RS
ESE 192UE (12 hour)/ES-194UE (24 hour) is a low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the LX-192UE/194UE, the ES-192UE/194UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time & Date data are output to Slave displays via the TC90™ Time Code output. The unit automatically compensates for Daylight Saving Time but this may be defeated by means of an internal solder jumper....
Our Price: $419.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-488U SMPTE / EBU Time Code Reader - Generator & Video Inserter w/ Option R - Remote Input: Rear Remote Control
Item# ESE-488U-RS
The ES-488U is a microprocessor-based unit which can Generate, Read and Video Insert SMPTE time code. All controls are front panel mounted while the inputs and outputs are accessible via rear mounted connectors. If option "R" is ordered, the unit may be remotely operated via RS232 interface to a PC running the Control Panel software. The ES-488U is a combination SMPTE/EBU Time Code Generator, Reader and Inserter. The unit can read and generate both time and user bits, and can operate in either drop...
Our Price: $1,269.70
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch AMBER LED Display w/ Option CW - Ceiling/Wall Mount Bracket
Item# ESE-943U-AMBERCW
The ESE 943U-AMBER-CW is a Time Code display featuring 4.0" bright Amber LED displays and includes a ceiling/wall mount bracket. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code™ (TC76™, TC89™, or TC90™), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine...
Our Price: $917.59
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display w/ Option CW - Ceiling/Wall Mount Bracket
Item# ESE-943U-CW
The ESE 943U-CW is time code display with 4 inch bright Red LED display and ceiling wall mount. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code™ (TC76™, TC89™, or TC90™), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A...
Our Price: $917.59
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE CA-TNCM/TNCM100 TNC Male to TNC Male Cable - 100 Foot
Item# ESE-CATNCMTNCM10
ESE CA-TNCM/TNCM100 is a 100 foot TNC Male to TNC Male Cable. ESE offers Antenna Extension Cables to be used with GPS Master Clock Systems, specifically, to extend the cable run between the GPS Antenna and the Master Clock. These cables are made with RG-58 coaxial wire with an impedance of 50 Ohms. See our GPS Application Notes (also linked in the Downloads tab) for more information.
Our Price: $405.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE DV-201 3G/HD/SD SDI Reclocking Distribution Amplifier w/ Independently Adjustable Channels & Option P2
Item# ESE-DV-201P2
The DV-201 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-201 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. An external power supply is not required as the DV-201 is completely self-contained requiring only 117VAC or 220VAC...
Our Price: $796.71
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-207 Portable 1x4 3G/HD/SD SDI Distribution Amplifier w/ Option DC
Item# ESE-DV-207-DC
The DV-207/DC is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-207/DC automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. The unit is powered from a user-supplied external DC supply...
Our Price: $494.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-208 1x12 3G/HD/SD SDI Distribution Amplifier
Item# ESE-DV-208
The DV-208 is an SDI digital video (3G, HD & SD) 1 x 12 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-208 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-208 is completely...
Our Price: $850.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-208/DC Portable 1x12 3G/HD/SD SDI Distribution Amplifier w/ Option DC
Item# ESE-DV-208-DC
The DV-208/DC is an SDI digital video (3G, HD & SD) 1 x 12 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-208/DC automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. The unit is powered from a user-supplied external DC supply...
Our Price: $969.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-228 3G/HD/SD SDI Reclocking Distribution Amplifier 1x8
Item# ESE-DV-228
The DV-228 is an SDI digital video (3G, HD & SD) 1 x 8 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-228 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-228 is completely...
Our Price: $749.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-229 HD/SD SDI Pattern Generator
Item# ESE-DV-229
The DV-229 is an HD/SD SDI Pattern Generator. The DV-229 offers two identical rear-mounted BNC outputs. A front panel LCD and pushbuttons allow for quick and easy setup. Alternatively, a software control panel and USB port may be used to configure the unit. Color bars as well as many other patterns are supplied. RP-188 and Closed Caption insertion, Embedded Audio Tones and onscreen Time Code/User Text insertion are also supported. Features: 2 SDI Outputs (BNC) Multiple Test Patterns Embedded Audio...
Our Price: $1,230.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-230 Genlockable HD/SD SDI Pattern Generator
Item# ESE-DV-230
The DV-230 is an HD/SD SDI Pattern Generator. The DV-230 offers four identical rear-mounted BNC outputs, plus a Genlock input which receives Tri-level or Bi-level sync. A front panel LCD and pushbuttons allow for quick and easy setup. Alternatively, a software control panel and USB port may be used to configure the unit. Color bars as well as many other patterns are supplied. RP-188 and Closed Caption insertion, Embedded Audio Tones and onscreen Time Code/User Text insertion are also supported. ...
Our Price: $1,705.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-242 3G/HD/SD SDI Reclocking Distribution Amplifier
Item# ESE-DV-242
The DV-242 is an SDI digital video (3G, HD & SD) Quad 1 x 2 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-242 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. An external power supply is not required as the DV-242 is completely self-contained requiring only 85-264VAC...
Our Price: $1,376.97
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-201 3G/HD/SD SDI Reclocking Distribution Amplifier w/ Independently Adjustable Channels
Item# ESE-DV201
The DV-201 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-201 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. An external power supply is not required as the DV-201 is completely self-contained requiring only 117VAC or 220VAC...
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-207 1x4 3G/HD/SD SDI Reclocking Distribution Amplifier
Item# ESE-DV207
2 Versions Available
The DV-207 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-207 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-207 is completely...
Read More
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-319 HD/SD Sync Generator
Item# ESE-DV319
2 Versions Available
The DV-319 is an HD/SD Sync Generator. Features of the DV-319 include four HD sync outputs. These outputs produce an HD tri-level sync output. Eighteen HD output formats are supported on the DV-319. Also supplied are two SD sync outputs that can be switched between color black or color bar outputs. An AES11 output and a Wordclock output are also standard features on the DV-319. The AES11 output may be switched between silent and tone modes. All outputs are provided on rear panel BNC connectors....
Read More
Our Price: $375.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-321 Genlockable HD/SD Sync Generator
Item# ESE-DV321
The DV-321 is an HD/SD Sync Generator with a genlock input. The genlock input accepts tri-level or bi-level signals. The DV-321 provides four HD sync outputs. These outputs produce an HD tri-level sync output. Eighteen HD output formats are supported on the DV-321. Also provided are two SD sync outputs that can be switched between color black or color bar outputs. An AES11 output and a Wordclock output are also standard features of the DV-321. The AES11 output may be switched between silent and...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-321P Genlockable HD/SD Sync Generator with 19 Inch Rack Mount
Item# ESE-DV321P
The DV-321 is an HD/SD Sync Generator with a genlock input. The genlock input accepts tri-level or bi-level signals. The DV-321 provides four HD sync outputs. These outputs produce an HD tri-level sync output. Eighteen HD output formats are suported on the DV-321. Also provided are two SD sync outputs that can be switched between color black or color bar outputs. An AES11 output and a Wordclock output are also standard features of the DV-321. The AES11 output may be switched between silent and tone...
Our Price: $617.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-101 Low Cost Very Accurate GPS Master Clock / Time Code Generator w/ Option IRIG-B & Option P
Item# ESE-ES-101IRIGBP
The ESE ES-101/IRIG-B/P is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ASCII (RS-232C), ESE-TC89™ and ESE-TC90™. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12)...
Our Price: $1,181.25
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code w/ Option P Rack Mount
Item# ESE-ES-101P
The ESE ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $945.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 102F GPS Master Clock/TIme Code Generator
Item# ESE-ES-102F
The ESE ES-102F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays six digits of time (Hour, Minute & Second). Simultaneously, the ES-102F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB) and a 1PPS signal. These outputs allow the ES-102F to easily interface with new or existing computers, automation and clock systems. A 12-channel...
Our Price: $1,467.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 110P GPS Based Frequency Generator w/ Option P Designed for Mounting into a Standard Equipment Rack
Item# ESE-ES-110P
The ES-110 generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form. The 1 PPS output is a 50% duty, 5 volt logic signal, positive-edge coinciding with the UTC seconds change. An ESE TC90T Time Code output is also provided for driving remote time displays. Internal DIP switches allow configuration of the Time Code, Time Zone, antenna cable length compensation, and...
Our Price: $1,611.84
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-124U 24 Hour Digital Clock
Item# ESE-ES-124U
The ES-124U is a low-cost clock for applications not requiring GPS or temperature controlled stability. The ES-124U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. a "Set/Select" toggle switch for setting is accessible on the rear of the case. Features: .55" Yellow LED Display 12 hour (ES-112U) or 24 hour (ES-124U) display Date Function Optional Rackmount 220-240 VAC (110-120 VAC is standard) & UL options available Various...
Our Price: $218.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 124UE Standalone 24HR Desk Clock
Item# ESE-ES-124UE
The ES-112UE (12 hour)/ES-124UE (24 hour) is a low-cost clock for applications not requiring GPS or temperature controlled stability. The ES-112UE/124UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. a "Set/Select" toggle switch for setting is accessible on the rear of the case. Features: .56" Yellow LED Display 12 hour (ES-112UE) or 24 hour (ES-124UE) display Date Function Optional Rackmount 220-240 VAC (110-120 VAC is standard)...
Our Price: $217.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 150u Primary/Secondary Master Clock System Switcher
Item# ESE-ES-150U
The ES-150U is a Master Clock Switcher. Master Clock Switchers are typically used with a Primary Master Clock (‘A’) and a Secondary Master Clock (‘B’). Master Clock Switchers provide a convenient way of switching to the Secondary Master Clock if a problem develops with the Primary Master Clock. The Master Clock Switcher monitors one or more of the ‘A’ inputs and when a fault is detected, it switches all of the outputs from the ‘A’ inputs to the ‘B’ inputs. The ES-150U monitors ESE and SMPTE/EBU...
Our Price: $1,489.90
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 160F Stand-Alone Quartz Master Clock with One Second Per Month Accuracy - 1.75 Inch Rack Mount
Item# ESE-ES-160F
ESE ES 160F is a crystal-based Master Clock / Time Code Generator. The unit employs a temperature compensated crystal oscillator (TCXO) which provides the ES-160F with an accuracy of one second per month. Six .56" yellow LED's display the real time or date while the unit simultaneously generates several types of time code. The unit provides a Coin Cell for time backup. Features: SMPTE-LTC/EBU, ESE, ASCII (RS-232 & USB) Time Code Outputs Universal Power Supply (90-264 VAC) Optional 10...
Our Price: $1,660.15
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-161UEP Time Code Remote Display with 19 Inch Front Mount Rack Panel (Option P)
Item# ESE-ES-161UEP
The ES-161UE is a Time Code display featuring .56" yellow LED displays and 19 inch front mount rack panel. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0" "1" or "A" at 9600 baud may be input via the rear-mounted 9-pin connector. The ES-161UE will automatically determine which code is being received. An internal DIP switch is used to configure the display...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-161UE-P-RED Time Code Remote Display with 19 Inch Front Mount Rack Panel and Red LED Display (Option P/Red)
Item# ESE-ES-161UEPRED
The ESE ES-161UE is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-161UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or...
Our Price: $270.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-161UJ .55 Desk Top Serial Slave 220 Volt
Item# ESE-ES-161UJ
The ES-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0" "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $252.29
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 185E plus ANT GPS Master Clock 1 3/4 Inch Rack Mount Antenna Option - Black
Item# ESE-ES-185EBKANT
The ESE ES-185E is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and supplies this data to the user in a variety of forms. A 12-channel receiver is employed that is capable of tracking up to twelve satellites simultaneously, although reception of only one is required for time data to be output. ESE's ES-185E offers an accuracy of better than 10nS, and is entirely self-setting. The dual battery...
Our Price: $2,649.69
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-188F 1RU Rackmount NTP Referenced Master Clock and Time Code Generator
Item# ESE-ES-188F
The ESE ES-188F is an NTP Referenced Master Clock / Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89, ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-188F to easily interface with new or existing computers, automation and clock systems. Software available for the ES-188F permits...
Our Price: $2,079.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-188F NTP6 Master Clock/Time Code Generator/NTP Server - 1 3/4 Inch Rack Mount with NTP6
Item# ESE-ES-188F-NTP6
The ES-188F/NTP6 is an NTP Referenced Master Clock / Time Code Generator / NTP Server. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188F/NTP6 generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89, ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-188F/NTP6 to easily interface with new or existing computers, automation and clock systems. The NTP Server...
Our Price: $2,459.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-198 NTP Reference Time Code Generator with Six Digits (Hour - Minute - Seconds)
Item# ESE-ES-198
The ESE ES-198 is an NTP referenced Time Code Generator. It displays six digits (Hour, Minute & Second) of time as received via a user selected NTP server. ES-198 then generates TC90 time code. This output allows the ES-198 to easily interface with new or existing computers, automation and clock systems. Optionally available are the RS-232 output "RS" and an NPR time code output "NPR" which may be needed for interfacing to some systems. Features: ESE Time Code output NTP Ethernet Port...
Our Price: $895.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-245J Quad 1 x 6 Audio Distribution Amp with 24 Independent Gain Controls and Isolated Outputs
Item# ESE-ES-245J
The ES-245J is an Audio Distribution Amplifier that accepts a balanced or unbalanced audio signal and produces exact copies of that signal. The outputs are isolated and have recessed Gain controls. All inputs and outputs are accessible on terminal blocks for simple "permanent" installations. Or, if option "XLR" is specified, all inputs and outputs are available on XLR connectors for easy disconnect/reconnect. This unit comes with option J which is configured to...
Our Price: $625.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 246/XLR/J Quad 1x6 Audio Distribution Amplifier with XLR Connectors - 220 VAC 50Hz
Item# ESE-ES-246-XLR-J
The ES 246/XLR/J is an ES-246 Audio Distribution Amplifier with XLR Connectors and the 220 VAC/50 Hz Operation option. This unit that accepts a balanced or unbalanced audio signal and produces exact copies of that signal. The outputs are isolated and have recessed gain controls. All inputs and outputs are accessible on terminal blocks for simple "permanent" installations. Or, if option "XLR" is specified, all inputs and outputs are available on XLR connectors for easy disconnect/reconnect....
Our Price: $652.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-249/UL 1x8 ASCII RS232 Time Distribution Amplifier with UL Option UL/CSA Approved Wall Mount Power Supply
Item# ESE-ES-249-UL
The ES-249-UL distribution amplifier with UL/CSA approved wall mount power supply is designed to accept RS-232C/ASCII and output up to eight identical copies. The unit has a single input and eight outputs that are accessible on rear mounted 9-pin D-sub connectors. Due to the nature of RS-232C, if long cable runs are required, it may be necessary to utilize a different time code that is later translated into RS-232C. Features: Use for distributing ASCII Time Codes 8 isolated outputs Male...
Our Price: $611.00
Availability: In Stock
Add to Wish List
ESE ES-289E Dual Rack Mount ES-289E Time Code Referenced NTP Time Server with UL and P2 Options
Item# ESE-ES-289EUL-P2
The ES-289E provides a practical method of putting accurate time information onto a network. The unit reads ESE or SMPTE/EBU time codes. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-289E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-289E is an IPV4/IPV6 compatible NTP Time Server. NTP clients can...
Our Price: $2,012.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-295 IRIG Time Code Generator/Translator
Item# ESE-ES-295
The ES-295 is an IRIG (A, B or G) Time Code Generator and Translator. When in the Generator (stand-alone) mode, Day of Year and Time are manually set using the front panel controls or the supplied PC software. In the Translator (sync) mode, the unit accepts IRIG-A, IRIG-B or IRIG-G time code. In either mode, the ES-295 provides an IRIG-A, IRIG-B or IRIG-G time code output (AM & TTL) and a 1pps output. Input and output time code selections are also made using the front panel controls...
Our Price: $4,589.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 299E IRIG Time Code NTP Time Server
Item# ESE-ES-299E
The ES-299E provides a practical method of putting accurate time information onto a network. The unit reads IRIG A, B, E and NASA36 time codes (Carrier or TTL). The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-299E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-299E is an IPV4/IPV6 compatible NTP Time Server. NTP clients...
Our Price: $1,848.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 362U P X 100 Minute Master Timer with 19in. Front Panel and Three Relay outputs
Item# ESE-ES-362U-PX
The ES-362U from ESE is a 100 Minute Up/Down Timer. The ES-362U is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides...
Our Price: $552.29
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362UXD 302U/Serial Output Drive Up/Down Timer with Remote Control 6 ft Cable Connect Switch Plate 3 Relay Output
Item# ESE-ES-362UXD
The ES-362UXD is a 100 Minute Up/Down Timer. The ES-362UE is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides...
Our Price: $588.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 453UE 8-Digit SMPTE/EBU Time Code Reader with ESE Time Code Output Option and Rackmount Option P
Item# ESE-ES-453UE-P
The ESE ES-453UE is a microprocessor-based SMPTE Time Code display with option P, 19" Front Panel (Rack Mount). Designed for mounting into a standard equipment rack the panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames,...
Our Price: $373.65
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 453UE 8-Digit SMPTE/EBU Reader with ESE Time Code Output with Options P & ESE
Item# ESE-ES-453UP-ESE
The ES-453U is a microprocessor-based SMPTE Time Code display. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. If the ESE Time Code Output option is ordered on the ES-453U, a rear-mounted BNC connector will provide access to the...
Our Price: $462.65
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-456UE SMPTE/EBU Timecode Display
Item# ESE-ES-456U
The ESE ES-456UE is a microprocessor-based SMPTE/EBU Time Code display. This unit reads in both forward and reverse direction, from 1/30 to 30x play speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. Specifications: Power: 10 Watts Electrical: 117 VAC, 50/60 Hz Input: SMPTE Time Code Display: 8-Digit,...
Our Price: $692.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-456UEP SMPTE / EBU Timecode Display
Item# ESE-ES-456UEP
The ESE ES-456UE is a micro-processor based SMPTE/EBU Time Code display. This unit reads in both forward and reverse direction, from 1/30 to 30x play speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. Features: Reads SMPTE/EBU Time Code (24/25/30 FPS) Reads Time and User Bits .56" Yellow LED display Bi-Directional...
Our Price: $750.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-493UJ/RED SMPTE / EBU Timecode Display with Red LED Display and 220VAC/50 Hz Operation
Item# ESE-ES-493UJ-RED
The eight digit display of the ESE ES-493UJ/RED is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display User Bits data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also...
Our Price: $832.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 520U D 60 Minute Master Timer Desktop Version with Remote Control
Item# ESE-ES-520U-D
The ES-520U is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. This unit features a Remote Control Option which consists of a connector wired to switches on a control plate via a six-foot cable. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote...
Our Price: $220.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-520UE/D/P DB9 .56-Inch Yellow LED/60 Min Up Timer (Min & Sec) - 19 Inch Rack Option with 6 Foot Cable
Item# ESE-ES-520UE-D-P
ESE ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. This model includes the following options: D - Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. P - 19" Front Panel (Rack Mount): Designed for mounting...
Our Price: $265.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UEP 60 Minute Up Timer with 19 Inch Front Panel Rack Mount Option
Item# ESE-ES-520UEP
The ES-520UE is a 60 Minute Up Timer with 19 inch front panel rack mount. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE...
Our Price: $240.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UT 60 Minute Master Timer with Tenth of a Second Option
Item# ESE-ES-520UT
The ESE ES-520UT is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE Timer Code™ output Optional...
Our Price: $223.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-56 Edit Code ESE/SMPTE LTC to USB Converter
Item# ESE-ES-56
The ES-56 converts SMPTE/EBU LTC code or ESE Time Code to a USB interface. The device is powered by the USB interface and may be used for computer time synchronization or for obtaining LTC data for editing purposes. The unit features five modes of operation, which may be selected by DIP switch or by software: ESE Time Code, LTC Forward/Reverse with Frames, or LTC Real Time with 3 selectable date formats (Leitch, SMPTE 309M or ESE). Features: Dongle measuring 5" L x 1.2" W x 1" H LTC Reader mode...
Our Price: $359.62
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-71 SMPTE/EBU/ESE to USB Converter
Item# ESE-ES-71
The ES-71 converts SMPTE/EBU LTC code or ESE Time Code to a USB interface. The device is powered by the USB interface and is intended for computer time synchronization. The unit features four modes of operation, which may be selected by DIP switch or by software: ESE Time Code, or LTC Real Time with 3 selectable date formats (Leitch, SMPTE 309M or ESE). Features: Dongle measuring 5" L x 1.2" W x 1" H 4 Time Code modes Error Detect and Correction (switchable) Time Sync Software provided Linux...
Our Price: $322.79
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 808/60 8 Port PoE Power Injector 60 Watt Power Supply
Item# ESE-ES-808-60
The ESE ES-808/60 is an 8 Port Power Injector with a 60 Watt Power Supply. This 8 port Power Injector is for Power over Ethernet (PoE) devices. The unit accept an Ethernet data signal and passes through the identical signal along with 48 VDC "injected" into the RJ-45 Ethernet connector using the Spare Pair. These units inject power passively. Applied voltage is available all the time, there is no auto negotiation with the attached client device. These devices have no switching function -...
Our Price: $141.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-820N Inline GPS Amplifier with N Adapters
Item# ESE-ES-820N
The ES-820 is an inline GPS amplifier which allows extension of the GPS antenna cable. Depending upon the type of cable, 100 to 400 feet of additional cable may be added per amplifier. When using more than one amplifier, we recommend the use of the ES-AB1A GPS Amplifier Power Supply between the Master Clock and the amplifier chain. The standard ES-820 is fitted with TNC connectors suitable for direct use with RG-58 type cables. Optional adapters are available for connection to lower loss RG-8/RG213/Belden...
Our Price: $345.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-941-POE 4.0 Inch 4-Digit Serial Slave ESE/SMPTE/EBU/ASCII - Wall Mount Red LED with Power over Ethernet
Item# ESE-ES-941-POE
The ES-941U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format 0, 1 or A at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-941U will automatically determine which code is being received. A rear-mounted...
Our Price: $742.29
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-941U-BLUE 4.0 Inch 4-Digit (Hr & Min) ESE/SMPTE/EBU/ASCll Serial Slave -19 Inch Wall Mount - Blue LED(10)
Item# ESE-ES-941U-BLUE
The ESE ES-941U-BLUE is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-941U will automatically determine which code...
Our Price: $724.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-941U-AMBER Remote Time Code Display with 4-Inch Digits - Amber
Item# ESE-ES-941UAMBER
The ES-941U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 19" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-941U will automatically determine which code is being received. A rear-mounted DIP...
Our Price: $679.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-942CW Stand-Alone Clock (HR-Min-Sec) 4 Inch Red LED Display with Wall Mount Option/Crystal Time Base/3 Wire Power
Item# ESE-ES-942CW
The ES-942 (12hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-942/944 uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Fast, Slow and Hold controls are accessible on the top of the case. This model includes the following options: C - Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming...
Our Price: $919.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-971 7 inch LED Time Code Display
Item# ESE-ES-971
The ES-971 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 28.75" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud). The ES-971 will automatically determine which code is being received. If receiving ESE Time CodeT from a timer,...
Our Price: $926.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-971CWPOE 7.0 Inch 4-Digit Serial Timecode - 29 Inch Wall Mount Red LED with Power over Ethernet
Item# ESE-ES-971-CWPOE
The ES-971 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 28.75" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time Code (TC76, TC89, or TC90), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0" or "1" or "A" at 9600 baud). The ES-971 will automatically determine which code is being received. If receiving ESE Time Code...
Our Price: $1,127.25
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-976/GREEN is a Time Code Display Featuring 7 Inch High Green LED Displays
Item# ESE-ES-976-GREEN
The ESE ES-976 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 43" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud). The ES-976 will automatically determine which code is being received. If receiving ESE Time CodeT from a...
Our Price: $1,210.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-976-NTP-C 7.0 Inch 6-Digit ESE/SMPTE/EBU/ASCII Serial Slave TimeCode with NTP Client Display
Item# ESE-ES-976-NTP-C
The ESE ES-976/NTP-C is an NTP Time Display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 43" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. Features: Optional Power Over Ethernet (PoE) Wall Mount Display PM Indicator Synchronizes...
Our Price: $1,238.55
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-991U/PoE 2.3 Inch 4-Digit Serial Slave Time Code Display - Min and Sec - ESE/SMPTE/EBU/ASCII - Amber Led
Item# ESE-ES-991U-POE
The ESE ES-991U is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $485.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-991U/PoE/Red 2.3 Inch 4-Digit Serial Slave Time Code Display - Min and Sec - ESE/SMPTE/EBU/ASCII - Red Led
Item# ESE-ES-991UPOE-R
The ESE ES-991U is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $485.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Options ANT - J - EBU - P & 6-Digit Amber Display
Item# ESE-ES-ANTJEBUP6
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code; ASCII (RS-232C), ESE-TC89 and ESE-TC90. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $1,652.22
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-104E/ES-104E/P2 Two ES-104E NTP Time Server Side by Side in a 19-Inch Rack Mount
Item# ESE-ES104EES104E
ESE ES-104E/ES-104E/P2 is 2 ES-104s Side by Side in a 19-Inch Rack Mount(P2 option) - Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel. The ES-104E provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104E is housed in a rugged black anodized desktop enclosure. A voltage-controlled...
Our Price: $2,900.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 126U-BLUE .55 Inch 12-Digit ESE/SMPTE/EBU/ASCII Serial Slave With Blue LED Display
Item# ESE-ES126U-BLUE
The "Digital Revolution" has been a part of every day life for more than a quarter century. And since its beginning, ESE has been there... supplying precision time keeping products for a myriad of applications and to most every industry. ESE equipment has flown on board the space shuttle and on a more mundane level, timed the speakers at the local city council meeting. Since 1971, the Broadcast Industry has referred to ESE as the "Clock and Timer People". As the Digital Revolution continues...
Our Price: $589.47
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure with Wall Option
Item# ESE-ES166UE-WALL
The ESE ES-166UE-WALL is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0" "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12-...
Our Price: $391.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure with Option P & Clear
Item# ESE-ES166UEPCLR
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24...
Our Price: $409.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 192UE Master Clock Line Frequency Referenced (6-Digit 12 Hour) - Desktop with Option P - 19 Inch Rack Mount
Item# ESE-ES192UE-P
The ESE ES-192UE (12 hour) is a low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the LX-192UE, the ES-192UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time & Date data are output to Slave displays via the TC90™ Time Code output. This Unit comes with Option "p" which includes the 1.75" Rackmount enclosure. Features: .56" Yellow LED Display 12 hour (ES-192UE) or...
Our Price: $308.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-201 1x4 Video Distribution Amp w/ Option P2 - Rack Mounts Two ES-201 Units Side-by-Side
Item# ESE-ES201ES201P2
The ES-201 provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. An independent screwdriver-adjustable Gain and Equalization control for each output are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused...
Our Price: $598.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES249ULJ 1x8 ASCII Time Code Distribution Amplifier - 1 3/4 in Rack Mount UL Approved Wall Mount Power Supply 220 V
Item# ESE-ES249ULJ
The ESE ES249ULJ is designed to accept RS-232C/ASCII and output up to eight identical copies. The unit has a single input and eight outputs that are accessible on rear mounted 9-pin D-sub connectors. Due to the nature of RS-232C, if long cable runs are required, it may be necessary to utilize a different time code that is later translated into RS-232C. Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female DB-9 Output Connectors RxD feed...
Our Price: $639.33
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 453UE/PJ/BLACK 55 Inch 8-Digit SMPTE/EBU Reader with 220 Volt - 19in Rack Mount - Black Anodized Front Options
Item# ESE-ES453UEPJ-BK
The ESE ES-453UE/PJ/BLACK is a microprocessor-based SMPTE Time Code display. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. If the ESE Time Code Output option is ordered on the ES-453UE, a rear-mounted BNC connector will provide access...
Our Price: $432.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 590U/D-RED 60 Minute Up Timer with Remote Control via 6 ft Cable/ Connector/ Switch Plate. Red LED Display
Item# ESE-ES590UD-RED
The "Digital Revolution" has been a part of every day life for more than a quarter century. And since its beginning, ESE has been there... supplying precision time keeping products for a myriad of applications and to most every industry. ESE equipment has flown on board the space shuttle and on a more mundane level, timed the speakers at the local city council meeting. Since 1971, the Broadcast Industry has referred to ESE as the "Clock and Timer People". As the Digital Revolution continues...
Our Price: $489.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-820 Inline GPS Amplifier
Item# ESE-ES820
The ES-820 is an inline GPS amplifier which allows extension of the GPS antenna cable. Depending upon the type of cable, 100 to 400 feet of additional cable may be added per amplifier. When using more than one amplifier, we recommend the use of the ES-AB1A GPS Amplifier Power Supply between the Master Clock and the amplifier chain. The standard ES-820 is fitted with TNC connectors suitable for direct use with RG-58 type cables. Optional adapters are available for connection to lower loss RG-8/RG213/Belden...
Our Price: $305.15
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 911E/NTP ASCII To NTP Time Server with Option P Rackmount
Item# ESE-ES911ENTP-P
The ES-911E/NTP provides a practical method of putting accurate time information onto a network. The unit reads ASCII (Format 1, A or NMEA-0183) or ESE TC90 time codes. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-911E/NTP is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. Designed to accept ASCII time code, the ES-911E/NTP...
Our Price: $902.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch BLUE Display in Wall Mount Enclosure w/ Option NTP-C
Item# ESE-ES943UNTPCBL
The ESE ES 943U NTP-C BLUE is a Time Code display featuring 4.0" bright blue LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code™ (TC76™, TC89™, or TC90™), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted...
Our Price: $942.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 962UP 2.3 Inch 12 Hour Digital Clock with P Option - includes 19 Inch Front Panel Rackmount
Item# ESE-ES962UP
The ESE ES-962UP (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-962U/964U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). The P Option includes 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is...
Our Price: $659.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 971-NTP-C/POE 7.0 In 4-Digit ESE/SMPTE/EBU/ASCII Serial Slave 29 In Wall Mount Red LED(10) with NTP & PoE Options
Item# ESE-ES971NTPCPOE
The ES-971/NTP-C/POE is an NTP Time Display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 28.75" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. The ES-971 is viewable from over 250 feet away. Features: Optional...
Our Price: $984.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Green LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Black 19 Inch Faceplate
Item# ESE-ES993UPBK-GN
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) Green LED displays. The unit is housed in a Black Anodized Front Panel. The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted...
Our Price: $665.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Red LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Black 19 Inch Faceplate
Item# ESE-ES993UPBK-RD
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) Red LED displays. The unit is housed in a Black Anodized Front Panel. The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted...
Our Price: $663.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 996U-CW-NTP-C/PoE 2.3-Inch - 6 Digit ESE/SMPTE/EBU/ASCII Serial Slave Time Display - 15-Inch Wall Mount - Red LED
Item# ESE-ES996UCWNTPC
ESE ES 996U-CW-NTP-C/PoE is a 2.3-Inch, 6 Digit ESE/SMPTE/EBU/ASCII Serial Slave Time Display with a 15-Inch Wall Mount, PoE option that receives 48V operating power via Ethernet cable and Red LED display. The ES-996U/NTP-C is an NTP Time Display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP...
Our Price: $795.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE HD 266/SD/1 HD & SD SDI Time Code Reader/Inserter
Item# ESE-HD-266-SD-1
The ESE HD-266/SD/1 is an HD & SD Time Code Driven Time & Date Video Inserter. The unit reads ESE Time Code, ESE Timer Code, SMPTE-LTC / EBU (at play speed only), D-VITC or RP-188 and synchronizes its internal real-time clock to the time code reference. The time is inserted onto an SDI video signal. Additionally, up to 30 characters of user defined text may be inserted into the video. Two independent character windows are available and can be used to insert Time, Date, Time & Date and/or...
Our Price: $1,889.00
Availability: In Stock
Add to Wish List
ESE HD-488E HD SDI Time Code Generator/Reader/Inserter - 1 3/4in Rack Mount
Item# ESE-HD-488E
The HD-488E is a Time Code Reader, Generator and Inserter for HD (High Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC) and RP-188 Time Code are both read and generated by the HD-488E. The unit accepts a multitude of HD formats. The inserter mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may also be superimposed onto the video. Flexibility is also provided to the user, allowing for...
Our Price: $2,758.55
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-488E HD SDI Time Code Generator/Reader/Inserter with IRIG-A/B/G Input plus IRIG-B Analog & TTL Outputs
Item# ESE-HD-488E-IRIG
The HD-488E is a Time Code Reader, Generator and Inserter for HD (High Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC) and RP-188 Time Code are both read and generated by the HD-488E. The unit accepts a multitude of HD formats. The inserter mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may also be superimposed onto the video. Flexibility is also provided to the...
Our Price: $4,500.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE HD-488E/SD HD/SD SDI Time Code Reader/Generator/Inserter
Item# ESE-HD-488E-SD
The HD-488E/SD is a Time Code Reader, Generator and Inserter for HD (High Definition) or SD (Standard Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC), Digital Vertical Interval Time Code (D-VITC) and RP-188 Time Code are both read and generated by the HD-488E/SD. The unit accepts a multitude of HD formats. In SD (Standard Definition) mode the unit will accept 4:2:2 (525 and 625 line) digital video signals. The inserter mode provides the ability to superimpose time and/or...
Our Price: $3,415.49
Availability: In Stock
Add to Wish List
ESE HD-491/SD HD/SD SDI Timecode Decoder/Generator
Item# ESE-HD-491-SD
The HD-491/SD is an HD & SD SDI Timecode Decoder/Generator. The HD-491/SD accepts an SDI signal, decodes the RP-188 or D-VITC and produces either a SMPTE or EBU LTC output. Simultaneously, the unit produces an ESE timecode output which can be used to drive new or existing clock systems. A selectable (reclocked or non-reclocked) SDI video loop output is also provided. The HD-491/SD can also be used as a Translator (for shuttle speed applications) or can be jammed and used as a Generator (real-time...
Our Price: $1,420.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD 266/SD/1 P HD & SD SDI Time Code Reader/Inserter - Rackmount
Item# ESE-HD266SD1P
The HD-266/SD/1 is an HD & SD Timecode driven Time & Date Video Inserter, with rackmount. The unit reads ESE Time Code, SMPTE/EBU LTC, D-VITC or RP-188 and synchronizes its internal clock to the timecode reference. The time is inserted onto an SDI video signal. Additionally, up to 30 characters of user defined text may be inserted into the video. Two independent character windows are available and can be used to insert Time, Date, Time & Date and/or User Defined Text. If using ESE Timecode from...
Our Price: $1,939.40
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-488E/GPS/ANT HD-488E - GPS & Antenna Option
Item# ESE-HD488EGPSANT
The HD-488E is a Time Code Reader, Generator and Inserter for HD (High Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC) and RP-188 Time Code are both read and generated by the HD-488E. The unit accepts a multitude of HD formats. The inserter mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may also be superimposed onto the video. Flexibility is also provided to the user, allowing for...
Our Price: $3,394.08
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD 491/SD P 8 DIGIT Timecode Decoder/Generator with 8-digit (H/M/S & Frames) Front Panel Mounted Display .55in LED
Item# ESE-HD491SDP8DIG
The HD-491/SD is an HD & SD SDI Timecode Decoder/Generator. The HD-491/SD accepts an SDI signal, decodes the RP-188 or D-VITC and produces either a SMPTE or EBU LTC output. Simultaneously, the unit produces an ESE timecode output which can be used to drive new or existing clock systems. A selectable (reclocked or non-reclocked) SDI video loop output is also provided. The HD-491/SD can also be used as a Translator/Time Code Converter (for shuttle speed applications) or can be jammed and...
Our Price: $1,705.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX 221/J/P2 RS-170A Black-Burst Generator / Genlockable with 220 VAC/50 Hz Operation and Dual Rack Mount Option
Item# ESE-LX-221-J-P2
The ESE LX 221 is a six output Black-Burst / Sync Generator. The unit features enhanced black-burst circuitry and extremely precise stability. The LX-221 provides a convenient source of RS-170A composite black-burst for pre-blacking tapes or for synchronization purposes. The unit may be genlocked to an external source of video or operate in stand-alone mode. In stand-alone mode the unit references an internal voltage-controlled, temperature compensated crystal oscillator. If the signal is...
Our Price: $739.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX-463U-J 1.0 Inch 8-Digit SMPTE/EBU Timecode Display - LX Enclosure Amber LED(7) Option J 220 Volt/50 Hz Operation
Item# ESE-LX-463U-J
The LX-463U-J is an eight digit display unit designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included...
Our Price: $668.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX-5116U 16 Inch Self-Setting Analog Remote Clock Display
Item# ESE-LX-5116U
The LX-5116U is a Wall Mount Analog Clock with a 16" viewing diameter. The LX-5116U is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. It can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch permits the clock to display time as received from a source of SMPTE/EBU, ASCII or ESE Time Code (the Impulse Clock mode may be replaced with an IRIG-B input mode as a factory option)....
Our Price: $655.40
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE-LX-5212U Digital/Analog 12-Inch Clock - SMPTE/EBU & ASCII Input - Amber LED
Item# ESE-LX-5212U
The ESE LX-5212U is a 12" Digital and Analog Clock. The unit is designed to read and display time as received from most any source of time code. Alternatively, the clock may be manually set and operated in stand-alone mode. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments, stay lit continuously and serve as reference indicators. Three...
Our Price: $751.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX-5112U-LIGHT 12 Inch Self-Setting Analog Remote Display Clock with Light Option
Item# ESE-LX5112ULIGHT
The ESE LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter and lighted dial. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time CodeT. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself...
Our Price: $629.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES911E/GPS/ANT/NTP/K Master Clock and Time Code Generator - Option K
Item# ESE-S911E-GPSANT
The ESE ES-911E/GPS/NTP/ANT/K is a GPS (Global Positioning System) Master Clock and Time Code Generator. ANT version - GPS Antenna: High Performance GPS Antenna for harsh RF Environments and K version - Provides a 10 MHz output and a 1 KHz output.. The unit is specifically designed to meet the NENA (National Emergency Number Association) Standard NENA-04-002 for a PSAP (Public Safety Answering Point) Master Clock and is capable of "Time Synchronizing" all components of a PSAP. The unit...
Our Price: $3,239.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE SD-488E-ESE SD SDI Time Code Generator/Reader/Inserter 1 3/4 Inch Rack Mount 1 with ESE Serial Time Code Output Opt.
Item# ESE-SD-488E-ESE
The SD-488E is a Time Code Reader, Generator and Inserter for SD (Standard Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC), Digital Vertical Interval Time Code (D-VITC) and RP-188 Time Code are both read and generated by the SD-488E. The unit accepts 4:2:2 (525 and 625 line) digital video signals. The inserter mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may also...
Our Price: $2,690.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX 5212U Digital/Analog 12-Inch Clock with NTP-C/PoE with ESE/SMPTE/EBU & ASCII Input/Amber LED(9)
Item# ESE-X5212UNTPCPO
The ESE LX-5212U/NTP6-C is a 12" Digital and Analog Clock. The unit is designed to read and display time as received from an NTP server via an Ethernet connection. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments, stay lit continuously and serve as reference indicators. Three Brightness controls allow the intensity of the three "sets"...
Our Price: $905.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE HD-488 HD Time Code Reader/Generator/Inserter with IRIG Option
Item# HD-488-IRIG
2 Models Available
The HD-488 is a Time Code Reader, Generator and Inserter for HD (High Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC) and RP-188 Time Code are both read and generated by the HD-488. The unit also accepts a multitude of HD formats. SD (Standard Definition) is available by specifying the model HD-488/SD, this will allow the unit to also accept 4:2:2 (525 and 625 line) digital video signals. The inserter mode provides the ability to superimpose time and/or user bits onto videowith...
Read More
Our Price: $3,505.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-362U 100 Minute Master Up/Down Timer
Item# LX 362U
The ESE LX-362U is a 100 Minute Up/Down Timer. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-25 connector provides access to remotely control the five pushbutton switch functions....
Our Price: $535.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-161U Time Code Remote Display
Item# LX-161U
The ES-161U/LX-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day...
Our Price: $313.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-192U Master Clock
Item# LX-192U
The LX-192U/194U is a rugged, low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the ES-192U/194U, the LX-192U/194U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. The LX-192U/194U features our High-Tech "LX" enclosure, of extruded and machined aluminum with a black baked-on "powdercoat" finish. Time & Date data are output to Slave displays via the TC90T Time Code output. The LX 194U is the...
Our Price: $351.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX 220A-P NTSC Black-Burst / Sync Generators with 19 Inch Rack Mount Option
Item# LX-220A-P
The LX-220A provides a convenient source of composite black-burst for preblacking tapes or for synchronization purposes. Eight isolated outputs are provided on rear mounted BNC connectors. The output signal consists of sync, blanking, reference black setup level and color burst which is SCH phased. The LX-220A employs a temperature-compensated crystal oscillator for high stability. A sinewave tone, at 0 dbm (2.2 vpp), is accessible on the rear-mounted RCA connector. The frequency...
Our Price: $550.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX-453U SMPTE / EBU Timecode Display
Item# LX-453U
The LX-453U is a microprocessor-based SMPTE / EBU Time Code display. The unit reads in both forward and reverse direction. The LX-453U reads 1/15 to 3x play-speed. The unit features a .56" high yellow LED display and comes standard in a rugged black powdercoated aluminum desk-top case. The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits. If the ESE Time Code Output option is ordered, a rear-mounted DB-9 connector will provide access to the TC89T...
Our Price: $470.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-520U 60 Minute Master Up Timer
Item# LX-520U
The LX-520U is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on a rear-mounted DB-9 connector. A rear-mounted BNC connector provides ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display Ruggedized Baked Powdercoat Aluminum case 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
LX-5212 Self-Setting Digital / Analog Clock and Time Code Reader / Display
Item# LX-5212
The LX-5212 is a 12" Digital / Analog Clock designed to read and display time as received from most any source of time code. Alternatively, the clock may be manually set and operated in stand-alone mode. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments, stay lit continuously and serve as reference indicators. Three Brightness controls allow...
Our Price: $850.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-993 Time Code Remote Display - Desktop Case
Item# LX-993U
The LX-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) yellow LED displays. The unit is housed in a rugged, black-textured aluminum desktop enclosure (3.5" H x 12" W x 6" D). The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The LX-993U will automatically...
Our Price: $680.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-5212U Digital/Analog 12-Inch Clock - SMPTE/EBU & ASCII Input - Amber LED with NTP6-C/PoE Options
Item# LX5212U-NTP6CPOE
The ESE LX 5212U NTP6-C/POE is a 12" Digital and Analog Clock with with the NTP6-C/PoE Options factory installed. The unit is designed to read and display time as received from most any source of time code. Alternatively, the clock may be manually set and operated in stand-alone mode. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments,...
Our Price: $849.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE SD-488 SDI Time Code Reader/Generator/Inserter
Item# SD-488
The ESE SD-488 is a Time Code Reader, Generator and Inserter for SD serial digital interface video. LinearTime Code (LTC) and Digital Vertical Interval Time Code (D-VITC) are both read and generated by theSD-488. The unit also accepts 4:2:2 (525 and 625 line) digital video signals. The inserter mode feature of the SD-488 provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may also be superimposed onto the...
Our Price: $1,895.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-488E HD SDI Time Code Generator/Reader/Inserter - 1 3/4in Rack Mount with NTP & GPS Options
Item# ESE-HD488ESDNTPG
The HD-488E/SD is a Time Code Reader, Generator and Inserter for HD (High Definition) or SD (Standard Definition) Serial Digital Interface (SDI) video. Linear Time Code (LTC), Digital Vertical Interval Time Code (D-VITC) and RP-188 Time Code are both read and generated by the HD-488E/SD. The unit accepts a multitude of HD formats. In SD (Standard Definition) mode the unit will accept 4:2:2 (525 and 625 line) digital video signals. The inserter mode provides the ability to superimpose time and/or...
Our Price: $4,081.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE HD-206/SD/1 HD/SD SDI Standalone Video Time and Date Inserter - 1 Channel
Item# ESE-HD-206-SD-1
The ESE HD-206/SD/1 is an HD & SD Standalone Time & Date Video Inserter. The time is inserted onto an SDI video signal. Additionally, up to 30 characters of user defined text may be inserted into the video. Two independent character windows are available and can be used to insert Time, Date, Time & Date and/or User Defined Text. Ten different font sizes are available and the characters may be located anywhere on the video using the horizontal & vertical controls. Included font colors are...
Our Price: $1,795.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-492/SD HD/SD SDI Time Code Decoder & LTC Generator/NTP Server
Item# ESE-HD-492-SD
The ESE HD-492/SD is an HD & SD SDI Timecode Decoder/Generator. The HD-492/SD accepts an SDI signal, decodes the RP-188 or D-VITC and produces either a SMPTE or EBU LTC output. Simultaneously, the unit produces an ESE timecode output which can be used to drive new or existing clock systems, and an NTP Time Server port. A selectable (reclocked or non-reclocked) SDI video loop output is also provided. The HD-492/SD can also be used as a Translator/Time Code Converter (for shuttle speed applications)...
Our Price: $2,695.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 362UE/D/P Master 100 Minute Up/Down Timer w/Remote Control & Rackmount Options - Clear Finish
Item# ESE-ES-362UE-D-P
The ESE ES-362UE is a 100 Minute Up/Down Timer with Options D and P* factory installed. The ES-362UE is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted...
Our Price: $580.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-996U/NTP-C/POE RED 2.3 Inch Time Code Display with Red LEDs / NTP-C and PoE Power Options
Item# ESE-996UNTPCPOER
The ESE ES-996U/NTP-C/POE RED is an NTP Time Code Display featuring 2.3" high red LED displays and PoE. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. The unit accepts, via the rear-mounted terminal block,...
Our Price: $708.12
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

ESE was founded in 1971 in El Segundo, California and since day one, ESE has maintained the ability to customize products to meet a customer's specific requirement. As of the year 2000, ESE has designed and built more than 2200 different "Specials". These Specials are sometimes a simple modification to an existing product while on many occasions require that a brand new unit be designed from scratch.

Today, ESE's line of products consists of eleven product "families" including "Master Clocks Systems"

Sign In

ESE

Narrow Products

By Category

By Price Range

Filter By