Where to Buy Jensen Transformers | Hum Elimination,Video Isolation Products

Viewing Item(s):

Display

Show As

Jensen VB-1BB IsoMax Single Channel 75 Ohm Composite Video Isolator
Item# JEN-VB1BB
The ISO-MAX VB-1BB is a single-channel 75 Ω video isolator for composite (baseband) video that is used to prevent 60 cycle `hum bars' even where ground voltage differences are very large such as in surveillance video systems, night clubs, video walls, broadcast stations, and industrial plants. Designed for use with standard RG59 type coaxial cable, the VB-1BB combines true 75 Ω BNC connectors with a custom wound transformer to minimize reflection. The unique design delivers...
Our Price: $159.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen CI-2RR IsoMax Stereo Audio Isolator & Hum Eliminator
Item# JEN-CI2RR
The Jensen Iso Max CI-2RR is a passive two channel RCA audio ground isolator designed to eliminate hum and buzz caused by ground loops in the most demanding audio systems. Eliminates hum and buzz caused by ground loops. The unbalanced stereo design begins with gold RCA connectors to ensure optimal signal transfer. These are housed in a rugged steel enclosure that is fitted with screw-down flanges for easy installation in racks, under shelves or attached to cabinetry. The magic...
Our Price: $239.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
JENSEN JT-DB-E Direct Box Transformer
Item# JT-DB-E
When loaded by the 1 kS input impedance typical of mic preamplifiers, this transformer has a 140 kS input impedance, making it ideal for high impedance sources. It can be used with or without an active buffer as a "direct box" for electric guitars or synthesizers. A 30 dB magnetic shield package is standard. Features: Converts unbalanced line levels to balanced mic level output Stops "hum and buzz" problems in musical instrument hook-ups Allows use of long cables without high frequency loss High...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen CI-2MINI Iso-Max PC Audio Ground Isolator
Item# JEN-CI2MINI
When used in unbalanced audio consumer interfaces, this isolator not only eliminates hum and buzz but also enhances audio quality by reducing "spectral contamination" due to ultrasonic and RF interference. To avoid excessive high frequency losses, no more than 3 feet of cable should be used on its outputs. Features: Eliminates the inherent ground noise coupling mechanism Common-mode ground noise rejection of 95 dB at 60 Hz Wide bandwidth: !3 dB at 0.25 Hz and 50 kHz Handles signals up to 7 volts...
Our Price: $239.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen Iso-Max DIN-2LI Dual 10k to 10k 1:1 Two Channel Line Input Module
Item# DIN-2LI
The Iso-Max DIN-2LI is a two channel line input isolator designed to eliminate noise in professional balanced audio systems by isolating the input of the connected device. The design begins with a gray molded assembly made from UL94-VO flame retardant Noryl that snaps into place onto a standard 35 mm DIN rail for easy installation in a NEMA enclosure. Connections to and from the module are made via removable screw-down wire terminals. Plug and play easy to use, this passive interface does not...
Our Price: $299.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Jensen ISO-MAX DIN-2LO-11FL Din Rail 2 Channel Line Output Transformer
Item# DIN-2LO-11FL
This module is designed for high performance line output stages. The 50% nickel alloy core gives it excellent distortion and level handling at a cost allowing many applications to enjoy the advantages of an output transformer. Driving signals should be free of DC and source impedance kept as low as possible. Features: Distortion 0.035% typ at 20 Hz and +4 dBu output level Wide bandwidth: !3 dB at 0.2 Hz and 15 MHz Drives 600 S loads to levels up to +21 dBu at 20 Hz Excellent time domain performance:...
Our Price: $229.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen Transformers DIN-2MS-2P Dual Mic Splitter Module
Item# DIN-2MS-2P
2 CHANNEL 2 WAY with DUAL FARADAY SHIELDS Provides additional, isolated balanced output as mic "splitter" Solves "transformerless" preamp RFI and CMRR problems High common-mode rejection: 130 dB at 60 Hz Excellent frequency response and time domain performance Provides support circuitry for phantom powered microphones This module is designed to be driven from a 150 S microphone source and loaded by the typical 1 kS input impedance of microphone preamplifiers. It can be used with balanced...
Our Price: $319.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen DIN-LI Din Rail 10k to 10k 1:1 Line Input Module
Item# DIN-LI
The Iso-Max DIN-LI is a single channel line input isolator designed to eliminate noise in professional balanced audio systems by isolating the input of the connected device. The design begins with 35 mm DIN rail molded in gray UL94-VO flame retardant Noryl format that snaps into place for easy installation in NEMA enclosures via removable screw-down wire terminal. Plug and play easy to use, this passive interface does not require any power to work. Inside is a Jensen high performance transformer...
Our Price: $179.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Jensen DIN-LO-11DM 600 to 600 1:1 Line Output Module
Item# DIN-LO-11DM
This module is designed for very high performance line output stages. Specially processed 80% nickel core alloy is used for lowest possible harmonic distortion of high level low frequency signals. For best performance, driving signals should be free of DC and source impedance kept as low as possible. Features: Distortion 0.004% typ at 20 Hz and +4 dBu output level Wide bandwidth: !3 dB at 0.10 Hz and 15 MHz Drives 600 S loads to levels up to +22 dBu at 20 Hz Excellent time domain performance:...
Our Price: $229.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen DIN-LO-11FL 600 to 600 1:1 Line Output Module
Item# DIN-LO-11FL
+21dBu Level Handling, 0.035% THD This module is designed for high performance line output stages. The 50% nickel alloy core gives it excellent distortion and level handling at a cost allowing many applications to enjoy the advantages of an output transformer. Driving signals should be free of DC and source impedance kept as low as possible. Specifications: Distortion 0.035% typ at 20 Hz and +4 dBu output level Wide bandwidth: !3 dB at 0.2 Hz and 15 MHz Drives 600 S loads to levels up to +21...
Our Price: $139.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Jensen Transformers

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

Jensen VB-1BB IsoMax Single Channel 75 Ohm Composite Video Isolator

Jensen CI-2RR IsoMax Stereo Audio Isolator & Hum Eliminator

JENSEN JT-DB-E Direct Box Transformer

Jensen CI-2MINI Iso-Max PC Audio Ground Isolator

Jensen Iso-Max DIN-2LI Dual 10k to 10k 1:1 Two Channel Line Input Module

Jensen ISO-MAX DIN-2LO-11FL Din Rail 2 Channel Line Output Transformer

Jensen Transformers DIN-2MS-2P Dual Mic Splitter Module

Jensen DIN-LI Din Rail 10k to 10k 1:1 Line Input Module

Jensen DIN-LO-11DM 600 to 600 1:1 Line Output Module

Jensen DIN-LO-11FL 600 to 600 1:1 Line Output Module

Sign In

Jensen Transformers

Narrow Products

By Category

By Price Range

Filter By