Shop Digital Audio Converters

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Ferrofish VERTO MX 64 Channel MADI - DANTE Format Converter
Ferrofish
Item# FER-VERTO-MX
The VERTO MX is a high-quality solution to connect a wide range of MADI equipment to a Dante/AES67 network with up to 192 kHz. The ultra-compact device is an easy way, to "dantify" an existing MADI live or studio setup with 64 x 64 channel operation. It can also simply turn MADI interfaces, like the RME MADIface series, into Audio-over-IP computer interfaces. Connected to a Dante network, the VERTO MX is immediately detected with all 128 I/Os and automatically configured. This way...
Our Price: $1,549.00
Availability: In Stock
Add to Wish List
Digital Audio Denmark AXCNTRBASE 2U Rack Thunder/Core 1744x1744 Digital Audio Router and Monitoring Interface
Digital Audio Denmark
Item# DAD-AXCNTRBASE
DISTINGUISHED SOUND QUALITY RIGHT OUT OF THE BOX Packed with superior DAD sound quality in a compact package. Then they added monitor control and speaker processing. AX Center was born to sit in a rack right next to you in the studio, in your portable rig - or maybe even on your desktop. It's the audio interface that dreams are made of, as it unites the legendary audio quality of pristine Digital Audio Denmark AD & DA conversion with the renowned transparency and musicality of their...
Our Price: $3,999.00
Availability: In Stock
Add to Wish List
RDL DD-BN2M Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DD-BN2M
The DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the...
Our Price: $744.02
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Gra-Vue MIO-DA-AUD AES to Analog audio converter
Gra-Vue Co., Ltd.
Item# GFE-MIO-DA-AUD
The MIO DA-AUD is a small audio D/A, featuring high quality AES to analog audio conversion. It converts two groups of digital audio to four ch. of balanced analo audio with 24 bit processing effectively. Output audio channel selected by DIP switch Features: Converts two groups of AES digital audio to four ch. balanced analog audio Broadcast quality with 24 bit processing and 48KHz audio sampling Adjustable output gain control selectable output audio channel Sampling rates from 32 to 96kHz Automatic...
Our Price: $303.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
NTP CARD-DA8 8 Channel Digital to Analog (DA) Ouput Card
NTP Technology
Item# NTP-CARD-DA8
The NTP CARD-DA8 is an 8 Channel Digital to Analog (DA) Output Card with LINE output, Selectable max. Output level, +9 dBu to +24 dBu in steps of 0.1 dB Features: 8 ch. LINE output Selectable max. Output level +9 dBu to +24 dBu in steps of 0.1 dB Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
Gra-Vue MIO-AD-AUD Analog Audio to AES Converter
Gra-Vue Co., Ltd.
Item# GFE-MIO-AD-AUD
The MIO-AD-AUD is a miniature Analog to AES digital audio converter. The MIO-AD-AUD Converts four ch. balanced analog audio to two groups of digital audio with broadcast quality 24 bit processing. Output audio group selected by DIP switch. The MIO AD-AUD requires a 12V DC power from an optional AC to DC power supply or 12V external source, such as a camera or battery. For user confidence and convenience there are two LEDs that indicate the status of source signal and power. Features: Convert...
Our Price: $303.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
AJA ADA4 4 Channel Bi-Directional Audio A/D and D/A Converter
AJA Video
Item# AJA-ADA4
The AJA ADA4 is a 4-Channel Bidirectional Audio A/D & D/A Converter, with power supply, that can be configured as a 4-channel A/D, a 4-channel D/A, 2-channel A/D and 2-channel D/A, or an AES synchronizer. The ADA4 accepts an AES11, wordclock or video sync/color black reference input for synchronization. Reference input and synchronization are automatic with a passive looping reference as well as a separate AES sync output. Easy to access DIP switches allow the audio levels on ADA4 to be...
Our Price: $585.00
Availability: In Stock
Add to Wish List
RDL DD-BN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2x2
Radio Design Labs
Item# RDL-DD-BN22
The RDL DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides...
Our Price: $798.96
Availability: In Stock
Add to Wish List
RDL DD-RN31 Bi-Directional Mic/Line Dante Interface 4 x 4 w/PoE - 2 XLR / RCA / 1 Mini-Jack In Terminal Block - White
Radio Design Labs
Item# RDL-DD-RN31
3 Color: Available
The DD-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations...
Read More
Our Price: $838.17
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
AJA ADA4 4 Channel Bi-Directional Audio A/D and D/A Converter - B-Stock (Opened/Used)
AJA Video
Item# AJA-ADA4-BS
The AJA ADA4 is a 4-Channel Bidirectional Audio A/D & D/A Converter, with power supply, that can be configured as a 4-channel A/D, a 4-channel D/A, 2-channel A/D and 2-channel D/A, or an AES synchronizer. The ADA4 accepts an AES11, wordclock or video sync/color black reference input for synchronization. Reference input and synchronization are automatic with a passive looping reference as well as a separate AES sync output. Easy to access DIP switches allow the audio levels on ADA4 to be...
Our Price: $585.00
Special Price: $438.75
Availability: In Stock
Add to Wish List
Ferrofish SFP-COAX Optional Coaxial MADl SFP with BNC for A32PRO / Pulse 16 and Verto
Ferrofish
Item# FER-SFP-COAX
Ferrofish SFP-COAX is an Optional SFP Module with Coaxial BNC I/O.
Our Price: $349.00
Availability: In Stock
Add to Wish List
Angry Audio DUAL STEREO BALANCING GADGET Stereo Converter - Four IHF Unbalanced Audio Inputs - 115VAC Version
Angry Audio
Item# AA-DUALSTEREOBAL
Professional applications use balanced audio for good reason. Balanced circuits offer many performance advantages compared to unbalanced audio, such as increased headroom and reduced noise from radiation and ground differentials. Sometimes, though, unbalanced devices are unavoidable. The Balancing Gadgets were made for those times. Dual Stereo Balancing Gadget We stuffed two Stereo Balancing Gadgets into a single box. Two playback-only consumer devices feed four RCA/Phono jacks at -10dBv....
Our Price: $289.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Sescom SES-AUDIO-N-HDMI L/R RCA Analog Audio & Toslink to HDMI Audio Inserter
Sescom
Item# SES-AUDIO-N-HDMI
Insert an external audio signal into an HDMI or DVI signal path with the Sescom SES-AUDIO-N-HDMI Audio Inserter. Using the Audio IN Select feature, switch among three different audio input options: HDMI, Optical, and L/R Analog. Insert stereo and multi-channel surround sound signals while extending the HDMI signal. Embeds external L/R analog or optical audio into HDMI signal Integrates audio and DVI video to HDMI signal output Replaces audio in the original HDMI signal with other input...
Our Price: $155.49
Availability: In Stock
Add to Wish List
Sescom SES-DAC1 Audio Converter-Digital Coax or TOSLINK to Stereo Analog L/R RCA
Sescom
Item# SES-DAC1
For a simple, reliable way to convert your Toslink or S/PDIF audio to analog stereo audio, the Sescom SES-DAC1 audio converter is the answer. This digital audio converter accepts both Toslink fiber and RCA S/PDIF connections for easy conversion to RCA Left and Right Analog audio. Features: Digital Coax or TOSLINK to Stereo Analog Conversion Supports Uncompressed 2-Channel LPCM Stereo Digital Audio Input S/PDIF 24-bit Incoming Bit Stream LED Power Indicator Compact Metal Enclosure CE,...
Our Price: $25.49
Availability: In Stock
Add to Wish List
Rolls DB226 Stereo Line to Balanced Mono Converter
Rolls Corporation
Item# RLS-DB226
The Rolls DB226 is a small adapter with an all metal chassis, designed to convert a stereo line level signal to a balanced mono output. The DB226 can also convert a balanced mono input to a mono RCA output. DIN rail bracket also avaliable. Features: Plugable screw terminal for the balanced side RCA input or output Small compact design Made in USA Specifications: 40 - 20K Hz response +4dB max level
Our Price: $79.00
Availability: In Stock
Add to Wish List
MuxLab 500087 Digital Audio Converter
MuxLab Inc
Item# MUX-500087
The Digital Audio Converter allows one (1) source of digital audio signal: coax (S/PDIF) or optic (TOSLINK) to be converted to an optic or a coax signal respectively. It supports most standards used to transmit two channels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound such as Dolby Digital Plus or DTS-HD High Resolution Audio (multichannel digital audio Dolby Digital 5.1, DTS, and Dolby True HD). Features: Convert TOSLINK fiber optic digital audio signal to COAX Convert...
Our Price: $68.00
Availability: In Stock
Add to Wish List
Blustream ADC11AU Analog to Digital Audio Converter (ADC)
Blustream
Item# BLU-ADC11AU
The Blustream ADC11AU is designed to convert left / right analog stereo audio into either coaxial or optical digital. Both digital outputs are simultaneous so audio can be distributed to multiple locations. The ADC11AU converts to 16-bit 48kHz digitalaudio for enhanced sound reproduction. Features: ADC (Analog to Digital Audio Converter) converts analog left / right stereo audio input to both S/PDIF optical and coaxial digital PCM outputs Both optical digital and coaxial digital output...
Our Price: $63.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Sescom SES-ADDA1 Audio Converter - Bidirectional Coax/TOSLINK w/ Selectable Input
Sescom
Item# SES-ADDA1
For a simple, reliable way to convert Toslink to S/PDIF or S/PDIF to Toslink, the Sescom SES-ADDA1 audio converter is the answer. This bidirectional digital audio converter accepts both Toslink fiber and RCA S/PDIF connections for easy two-way conversion. This SES-ADDA1 supports S/PDIF amplification and can be used as a repeater to extend the signal transmission distance. Features: Bidirectional Conversion Coax/TOSLINK S/PDIF Extends Transmission Distance LED Power Indicator TOSLINK...
Our Price: $41.95
Availability: In Stock
Add to Wish List
Alfatron ALF-CVDAC TOSLink/Coax Digital to RCA/3.5mm Analog Audio Converter
Alfatron Electronics, Inc
Item# ALF-CVDAC
The Alfatron ALF-CVDAC Digital audio converter is designed to convert coaxial or Toslink digital audio input to analog RCA L/R and 3.5mm audio output. Simultaneously, the converter provides COAX SPDIF output for a digital audio extension. Features: Convert coaxial or Toslink digital audio input to analog L/R and 3.5mm audio output. Split one audio source into three audio outputs. Supports up to 24-bit/192 kHz input Easy to install and simple to operate. Ideal for interfacing between modern...
Our Price: $74.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Aviom AN-16/o v.4 16-Channel Mic- and Line-Level Output Module
Aviom
Item# AN-16O-V4
The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters. Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level. Use the AN-16/o...
Our Price: $1,499.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Zigen ZIG-DAC Digital Coax to Analog Converter - Dolby Digital and DTS Audio Downmix
Zigen Corp
Item# ZIG-DAC
The Zigen ZIG-DAC with Dolby® Digital & DTSTM 2.0 Decoder provides the ideal solution for converting a coaxial digital audio signal to analog stereo audio. It provides high quality sound conversion. The Dolby Digital & DTS 2.0 function guarantees that Dolby digital/DTS2.0 audio signals are down-mixed to analog stereo without loss of quality. This unit is perfect for use with HXL-88 and HXL-44 matrices routers. Features: The ZIG-DAC takes a coaxial digital audio signal input...
Our Price: $215.00
Special Price: $179.00
Availability: In Stock
Add to Wish List
Hosa ODL 312 OPT-S/PDIF AES-EBU Converter
Hosa Technology, Inc.
Item# ODL-312
Mix-down or transfer of digital recordings from one manufacturer's digital recorder to another's isn't always straightforward. Some digital work stations, sound cards or DAT recorders have S/PDIF optical outputs, and some offer only AES/EBU inputs, or vice versa. The ODL-312 by Hosa is a high quality, converter, allowing simultaneous transfer of two channels of digital audio in either format in both directions. the Hosa ODL-312 converts between AES/EBU (XLR) and S/PDIF (TOSlink fiber optic). With...
Our Price: $229.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Ferrofish B4000Plus Unique Authentic Organ Sound Into a Valuable Modern Design
Ferrofish
Item# FER-B4000P
The Hammond organ is one of the most widely emulated sounds in music technology, the hands-on use of drawbars for many players is an essential part of the performing experience, and for that you need hardware. The B4000+, from Ferrofish, is a Hammond sound module with nine drawbars and plenty of ins and outs. It's powered by an ARM Cortex M3 and Sharc DSP processors, allowing three fully polyphonic manuals to be used. Polyphony is an important factor with organ sounds, since you often find yourself...
Our Price: $399.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ferrofish PULSE-16-MX AD/DA Converter - ADAT and MADI
Ferrofish
Item# FER-PULSE-16-MX
The PULSE16MX is the high-quality solution to connect a wide range of Analog, MADI and ADAT equipment to a mixer or a computer interface - with up to 192 kHz. The high-density converter provides 16 x 16 balanced analog TRS-I/Os and can handle pro studio levels up to +20dBu - adjustable in 1 dB steps. The PULSE16 is using the recent high-performance low-latency converter generation from Cirrus Logic. Combined with a temperature-compensated high-precision clock and an active jitter reduction...
Our Price: $1,349.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
LYNX Technik OH-TR-50-850-MM 1G Ethernet and MADI Optical Transceiver (TR) SFP Module - Multimode - 850nm - Fiber LC
LYNX Technik Inc
Item# LNX-OH-TR50850MM
The LYNX Technik OH-TR-50-850-MM Data optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical data signal into an optical signal for transmission over fiber, and will also receive an optical data signal for conversion to an electrical signal for further processing. Fixed TX wavelength of 850nm suitable for distances up to 550m (multimode fiber) A...
Our Price: $114.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RME M32 AD PRO II 32-Channel High-End 192 kHz AD Converter with MADI and AVB
RME Audio
Item# RME-M32-ADPRO-II
The RME M-32 AD Pro II (Part of the M-32 Pro II Series) is designed to meet the demanding requirements of professional studios, immersive sound installations, live sound systems, and industrial applications that need a reliable solution for analog conversion with high-end network audio processing. These new converters are available with either 32 analog inputs or outputs, and either with Dante® or AVB for a choice of four different models. Boasting up to 32-channels, fully equipped...
Our Price: $3,999.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
RME M32 DA Pro II 32-Channel High-End 192 kHz DA Converter with MADI and AVB
RME Audio
Item# RME-M32-DAPRO-II
The RME M-32 DA Pro II (Part of the M-32 Pro II Series) is designed to meet the demanding requirements of professional studios, immersive sound installations, live sound systems, and industrial applications that need a reliable solution for analog conversion with high-end network audio processing. These new converters are available with either 32 analog inputs or outputs, and either with Dante® or AVB for a choice of four different models. Boasting up to 32-channels, fully equipped...
Our Price: $3,999.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Atlona AT-HDR-M2C 4K HDR Multi-Channel Digital to Two-Channel Audio Converter
Atlona Technologies
Item# ATNO-AT-HDR-M2C
The Atlona AT-HDR-M2C is an audio converter for extracting and downmixing multi-channel PCM, Dolby, and DTS audio from HDMI sources. It features an HDMI input with pass-through, and delivers stereo downmixed audio over a separate HDMI output, as well as unbalanced analog and TOSLINK digital audio outputs. The HDR-M2C is compatible with high dynamic range (HDR) formats and is HDCP 2.2 compliant. It supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates...
Our Price: $575.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARDM-AES-XLR 4 balanced XLR AES/EBU Inputs w/Loop Through Audio Module
Marshall Electronics
Item# MARDM-AES-XLR
Features: 4 Balanced AES/EBU stereo inputs (DB-25) 4 Passive Loop-Through Outputs (DB-25) DB-25 to 8 XLR Break-Out Cable included Supports 4 Stereo Channels or DolbyMulti-Channel Decoding with optional module
Our Price: $462.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Blustream DA22DIG 2x2 Digital & Analog Dante Converter - Supports 44.1 48 & 96kHz with Sample Rates at 24 Bit
Blustream
Item# BLU-DA22DIG
The Blustream DA22DIG has been designed to both encode 2ch analog or digital audio to a Dante digital signal, and decode a Dante digital signal to 2 channel analog and digital audio. The DA22DIG features both analog audio and digital audio connections, selectable via dip-switch and is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply. The DA22DIG also features support for microphones including 48V phantom power, as well as support for AES67...
Our Price: $800.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
MuxLab 500080 Digital Audio Converter Lpcm
MuxLab Inc
Item# MUX-500080
The MuxLab Digital Audio Converter 500080, converts one LPCM-encoded Digital Coax (S/PDIF) or Digital Optical (TOSlink) audio signal to a standard left/right analog audio output (RCA). This allows a digital audio source such as a BluRay, games console or CD player without a stereo audio output to be connected to an amplifier or TV. Features: Converts digital audio signals to stereo audio (DAC) Sample Rate: up to 96kHz Bit Rate: 24bit S/PDIF bitstream on right and left channels Input:...
Our Price: $82.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Angry Audio BIDIRECTIONAL BALANCING GADGET Stereo Converter - 2 IHF Inputs/Outputs - 115VAC Version
Angry Audio
Item# AA-BIDIRECTIONAL
Professional applications use balanced audio for good reason. Balanced circuits offer many performance advantages compared to unbalanced audio, such as increased headroom and reduced noise from radiation and ground differentials. Sometimes, though, unbalanced devices are unavoidable. The Balancing Gadgets were made for those times. Bidirectional Balancing Gadget Converts one stereo pair from unbalanced to balanced and another stereo pair from balanced to unbalanced. Perfect for a recording...
Our Price: $289.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Angry Audio STEREO BALANCING GADGET Stereo Converter - 2 IHF Unbalanced Audio Inputs & 2 PRO Balanced Audio Outputs
Angry Audio
Item# AA-STEREOBALANCE
Professional applications use balanced audio for good reason. Balanced circuits offer many performance advantages compared to unbalanced audio, such as increased headroom and reduced noise from radiation and ground differentials. Sometimes, though, unbalanced devices are unavoidable. The Balancing Gadgets were made for those times. Stereo Balancing Gadget Converts unbalanced stereo -10dBv audio via two RCA/Phono jacks into professional +4dBu fully balanced lines on two XLR connectors. Ideal...
Our Price: $239.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Angry Audio TALKSHOW GADGET Add Broadcast Features to Angry Audio Audio Mixers - 115VAC
Angry Audio
Item# AA-TALKSHOW
If you've shopped for a small live audio mixer lately, you know there are some great choices out there. Some of these boards are so good, you might be tempted to use one to produce radio content. Unfortunately, several essential radio features are missing from these products, and up to now, getting these features meant buying a mixer designed especially for radio. Enter the Talkshow Gadget. The Talkshow Gadget adds useful broadcast features to your live mixer. LED illuminated buttons give...
Our Price: $279.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Studiohub AES/EBU to S/PDIF Converter
StudioHub
Item# MJ-SPDIFIN
A simple inline AES/EBU to S/PDIF Converter. Converts pro digital signals to consumer grade digital format.
Our Price: $125.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
StudioHub MJ-DA Digital to Analog Converter with 44.1/32/48 kHz Internal Crystal Sample Rate Reference
StudioHub
Item# SOHB-MJ-DA
The StudioHub+ MJ-DA D/A MatchJack is a professional stereo Digital to Analog converter. Inputs may be either Optical, S/PDIF, or AES/EBU digital. The input signal is converted to 24 bit analog audio and is output as balanced professional level via an RJ45 wired to StudioHub+ pin-out standards. Sample rates of 32kHz, 44.1kHz, 48kHz and 96kHz are automatically selected based on the detected source sample rate. Power is supplied either via StudioHub+ "DC-Link" power (through either...
Our Price: $170.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Appsys Pro Audio AUX-ADAT 16 x 16 Channel ADAT Card for Flexiverter Converters
Appsys Pro Audio
Item# APP-AUX-ADAT
The Flexiverter AUX-ADAT is a 16 x 16 channel ADAT I/O (S/PDIF) (2x Toslink In+2x out) card for the Flexiverter Main Unit.(Required) Features: Specifications:
Our Price: $199.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Appsys Pro Audio AUX AES3 8 x 8 Channel AES/EBU Card for Flexiverter Converters
Appsys Pro Audio
Item# APP-AUX-AES3
The Flexiverter AUX-AES3 is an 8 x 8 channel AES3 I/O on 1x DB25, fully transformer isolated card for the Flexiverter Main Unit.(Required) Features: Specifications:
Our Price: $299.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Appsys Pro Audio SRC-64 64 Channel Bidirectional Sample Rate Addon for MVR-64 Multiverter
Appsys Pro Audio
Item# APP-SRC-64
The Appsys Pro Audio SRC-64 Converts sample rates between all of your interfaces! To add even more power to your multiverter, a sample rate converter hardware module is available. The module features 64x64 channel bi-directional, asynchronous sample rate conversion between two arbitrary sample rates and interfaces. Features: Top-notch performance: THD+N = -133dB typ, -120dB max. True asynchronous, bi-directional conversion of 64×64 channels Supports arbitrary sample rates in the range from...
Our Price: $999.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Universal Audio UAD-2 PCIe DSP Accelerator with 8 SHARC Processors
Universal Audio
Item# UA-D2PCIEOCTOCOR
Stunning analog power for your Mac or PC tower. Ready to super-charge your Mac or PC tower with world-class analog sound? UAD-2 DSP Accelerator cards provide full access to UAD Powered Plug-Ins, including exclusive plug-ins from Studer, Ampex, Lexicon, Neve, Manley, Roland, SSL and more. The UAD-2 packages feature a user-installable PCIe-format processing card for your desktop tower or compatible expansion chassis, plus the “Analog Classics” plug-in bundle (VST/AU/RTAS), giving you vintage tone...
Our Price: $999.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Appsys Pro Audio Flexiverter AES50 96 x 96 Channel Format Converter for AES50
Appsys Pro Audio
Item# APP-FLX-AES50
A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available. Format combinations provide the most common conversions with improved features and unique pairings (e. g. AES50 Dante, Dante Dante SRC, Dante AVB). The Flexlink Connection The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter...
Our Price: $999.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
LYNX Technik OH-TR-MADI-1310-MM Optical Transceiver with 1310nm Transmitter Wavelengths for LYNX Yellowbrik/GreenMachine
LYNX Technik Inc
Item# LNX-OHTRMADI1310
The OH-TR-MADI-1310-MM optical transceiver is a plug in option for select LYNX Technik yellobrik and greenMachine products. Specifically this option is intended to convert the LYNX OTR 1210 MM MADI Transceiver module from the standard 850nm to 1310nm wavelength. This is also a plug in option for greenMachine when using the MADI audio APP. TX Wavelength is a fixed 1310nm, and suitable for distances up to 2km. A socket, or "cage" is provided for the SFP in the supporting LYNX Technik product...
Our Price: $71.25
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RME M32 DA PRO II-D 32-Channel High-End 192 kHz DA Converter with Dante and MADI
RME Audio
Item# RME-M32DAPRO-IID
The RME M-32 DA Pro II-D (Part of the M-32 Pro II Series) is designed to meet the demanding requirements of professional studios, immersive sound installations, live sound systems, and industrial applications that need a reliable solution for analog conversion with high-end network audio processing. These new converters are available with either 32 analog inputs or outputs, and either with Dante® or AVB for a choice of four different models. Boasting up to 32-channels, fully equipped...
Our Price: $4,599.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-56 Edit Code ESE/SMPTE LTC to USB Converter
ESE
Item# ESE-ES-56
The ES-56 converts SMPTE/EBU LTC code or ESE Time Code to a USB interface. The device is powered by the USB interface and may be used for computer time synchronization or for obtaining LTC data for editing purposes. The unit features five modes of operation, which may be selected by DIP switch or by software: ESE Time Code, LTC Forward/Reverse with Frames, or LTC Real Time with 3 selectable date formats (Leitch, SMPTE 309M or ESE). Features: Dongle measuring 5" L x 1.2" W x 1" H LTC Reader mode...
Our Price: $359.62
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
NTP CON-AES-LFH60-XLR AES3 LFHSUB to XLR Break Out Cable - 2 Meters
NTP Technology
Item# CON-AES-LFH60XLR
The NTP CON-AES-LFH60-XLR is an AES3 Break Out Cable (LFHSUB/LRS) - 2 Meters Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CON-D25-XLR-F-AUDIO DSUB to XLR Tascam Analog In Cable
NTP Technology
Item# CON-D25XLRFAUDIO
The NTP CON-D25-XLR-F-AUDIO is a DSUB to XLR Tascam Analog In Cable Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CON-D25-XLR-M-AUDIO DSUB to XLR Tascam Analog Out Cable
NTP Technology
Item# CON-D25XLRMAUDIO
The NTP CON-D25-XLR-M-AUDIO is a DSUB to XLR Tascam Analogue Out Cable Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CON-OPT-LC/SC-2M LC-SC Optical Multi Mode Fiber - 62.5 / 125 - 2 Meters
NTP Technology
Item# CON-OPT-LC-SC-2M
The NTP CON-OPT-LC/SC-2M is an Optical Multi Mode Fiber Cable - 62.5 / 125 - 2 Meters Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CON-AES-D25-XLR-TASC AES3 DSUB to XLR Break Out Cable - 3 Meters
NTP Technology
Item# CONAESD25XLRTASC
The NTP CON-AES-D25-XLR-TASC is an AES3 Break Out Cable (DSUB/XLR) - 3 Meters Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CON-BNC-HD/STD-0.5M HD-BNC to BNC Adapter Cable - Pair - 0.5 Meters
NTP Technology
Item# CONBNCHD-STD0-5M
The NTP CON-BNC-HD/STD-0,5M is an HD-BNC to BNC Adapter Cable Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CARD-AES8 8 AES3 I/O Card with SRC and LFH Connector
NTP Technology
Item# NTP-CARD-8AES
The NTP CARD-AES8 is an 8 x AES I/O with 16 channels in and out, Built-in Sample Rate Converter on input, Sample rates from 44.1 to 192 kHz Features: 8 x AES I/O 16 channels in and out 8 cards = 128 channels in and out Built-in Sample Rate Converter on input Sample rates from 44.1 to 192 kHz Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP CARD-L8 8 Channel Analog to Digital Input Card (AD) - Line In Only
NTP Technology
Item# NTP-CARD-L8
The NTP CARD-L8 is an 8 Channel Line In only Analog to Digital Input Card with Phantom Power, Mic Pre Gain, Phase Invert and Selectable Max. Line Input Level. Features: 8 ch. LINE input 8 ch. MIC/LINE input Phantom power Mic pre gain Phase invert Selectable max. line input level +9 dBu to +30 dBu in steps of 0.1 dBLong Product Description (150 words or less): AD conversion for the DAD and Penta module product lines. Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP LIC-CARD-M8 8 Channel Mic Pre License for Line AD Card
NTP Technology
Item# NTP-LIC-CARD-M8
The NTP LIC-CARD-M8 is an 8 Channel Mic Pre License for Line AD Cards. Features: Specifications:
Availability: Software Download
Item Details
NTP MOD-DANTE IP Audio 64 Channel DANTE Brooklyn II Module
NTP Technology
Item# NTP-MOD-DANTE
The NTP MOD-DANTE is a 64 Channel IP Audio Bi-Directional Module with support for AES67 / DDM Network delay setting up to 41 msec. Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP MOD-MADI-2FP Dual SFP I/O Mini-Module without SFP Modules
NTP Technology
Item# NTP-MOD-MADI2SFP
The NTP MOD-MADI-2SFP is a 2 x MADI I/O, 2 x 64 Channels Dual SFP with Built in Sample Rate Conversions on Input, Choise of Physical Interface; SFP / Coax or Optial, MM or SM, Redundant Mode, Hot link, mode, Auto Switch-over in cae of signal loss 2 x 128 Channels. No SFP Modules. Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP MOD-SFP-1300-LD Optical Transceiver Multi Mode SFP - 1300 nm Low Output LED
NTP Technology
Item# NTP-MODSFP1300LD
The NTP MOD-SFP-1300-LD is a multi mode optical transceiver SFP with 1300nm and low output laser. Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP MOD-SFP-1300-LZ Optical Transceiver Single/Multi Mode SFP - 1300 nm Laser
NTP Technology
Item# NTP-MODSFP1300LZ
The NTP MOD-SFP-1300-LZ is an optical transceiver single/multi mode SFP with 1300 nm Laser Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP MON-LIC PRO MON Monitor Control License / Gain-Sum - Upgrade Only
NTP Technology
Item# NTP-MON-LIC
The NTP Technology MON-LIC EUCON Monitor Control License option enables the AX32 AD/DA Converter and digital matrix, as well as the DX32 Digital audio interface and matrix, to operate as an audio signal processor providing high-resolution signal summing and low latency routing of monitor signals. AX32 has as well an option for speaker correction EQ and bass management. The monitor control is managed via the DADman 5.2 software application, which has support for the EUCON 3 control protocol,...
Availability: Software Download
Item Details
Appsys Pro Audio Flexiverter AES3 16 x 16 Channel Format Converter for AES/EBU
Appsys Pro Audio
Item# APP-FLX-AES3
A Flexiverter is an ultra-compact box with a main format, dual power supply and a slot for a switchable AUX board, which adds the conversion format to the FLX unit. At the moment 5 FLX units and 10 AUX boards are available. Format combinations provide the most common conversions with improved features and unique pairings (e. g. AES50 Dante, Dante Dante SRC, Dante AVB). The Flexlink Connection The FlexLink connection is designed to connect two Flexiverters, or one Flexiverter...
Our Price: $999.00
Availability: In Stock
Add to Wish List
RDL HR-ADC1 Analog to Digital Audio Converter
Radio Design Labs
Item# HR-ADC1
The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style. Superior analog performance fine tuned through audiophile listening practices produces very low distortion (0.0006%), exceedingly low noise (-135 dB) and remarkably flat frequency response (+/- 0.05 dB). This performance is coupled with unparalleled metering flexibility and programmability with average mastering level monitoring and peak value storage. With external...
Our Price: $888.27
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
RDL HR-DAC1 Digital to Analog Converter - 24 bit 192 kHz
Radio Design Labs
Item# HR-DAC1
The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source. The HR-DAC1 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU. The AES/EBU input is 110 Ohm terminated; the S/PDIF coaxial and AES-3ID jacks are 75 Ohm terminated. A front-panel LOCK LED indicates the presence of a valid digital audio source without any phase-lock or bit errors. Sample rates...
Our Price: $680.93
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DD-RN40 Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE - 4 XLR In / 2 Out on Rear-Panel Terminal Block - White
Radio Design Labs
Item# RDL-DD-RN40
3 Color: Available
The DD-RN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN40 is PoE powered, and is available in multiple finishes with...
Read More
Our Price: $836.81
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
RDL DDB-BN2M Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DDB-BN2M
The DDB-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the...
Our Price: $744.02
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDB-BN2ML Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DDB-BN2ML
The DDB-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or...
Our Price: $707.83
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDB-BN31 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4
Radio Design Labs
Item# RDL-DDB-BN31
The DDB-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that...
Our Price: $831.43
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDS-BN22 Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DDS-BN22
The DDS-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDS-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides...
Our Price: $798.96
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDS-BN2M Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DDS-BN2M
The DDS-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the...
Our Price: $744.02
Availability: In Stock
Add to Wish List
RDL DDS-BN2ML Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DDS-BN2ML
The DDS-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or...
Our Price: $707.83
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDS-BN31 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4
Radio Design Labs
Item# RDL-DDS-BN31
The DDS-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for...
Our Price: $831.43
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DDS-BN40 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2
Radio Design Labs
Item# RDL-DDS-BN40
The DDS-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDS-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch...
Our Price: $855.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Ensemble Designs BrightEye 30 Bi-directional Audio ADC and DAC
Ensemble Designs
Item# ENDE-BE30
BrightEye 30 is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio. As a bi-directional converter, two channels of analog audio are converted to AES digital audio and at the same time an AES stream is converted to two channels of analog. Alternately, the unit can be configured as a four channel AES to analog converter...
Our Price: $998.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Ensemble Designs BrightEye 30-D Audio ADC/DAC Bi-directional Converter w-Delay
Ensemble Designs
Item# ENDE-BE30-D
BrightEye 30 D is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio. As a bi-directional converter, two channels of analog audio are converted to AES digital audio and at the same time an AES stream is converted to two channels of analog. Alternately, the unit can be configured as a four channel AES to analog converter...
Our Price: $1,473.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
NTP CON-AES-LFH60-2DB25 AES3 LFHSUB to 2DB25 Break Out Cable - 0.5 Meters
NTP Technology
Item# CONAESLFH602DB25
The NTP CON-AES-LFH60-2DB25 is an AES3 Break Out Cable (LFHSUB/2DB25) - 0.5 Meters Features: Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
Merging Technologies MERGING+ANUBIS Audio Interface - 2 Combo Mic/Line Inputs - 2 XLR Outputs
Merging Technologies
Item# MT-ANUBIS
The Merging Technologies MERGING+ANUBIS is a ground-breaking new audio interface incorporating the Swiss expertise of Merging Technologies in analog and digital, networked audio and DSP technology. More significantly, it offers unique features to any engineer or musician looking for a compact AD/DA unit with the quality you would expect from Merging, and a fully featured monitor controller that integrates with any DAW. MERGING+ANUBIS was designed in Switzerland, where it is assembled...
Our Price: $2,949.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Merging Technologies MERGING+ANUBIS SPS Audio Interface - Seamless Protection Switching - 2 Mic/Line In - 2 XLR Out
Merging Technologies
Item# MT-ANUBIS-SPS
The Merging Technologies MERGING+ANUBIS SPS (Seamless Protection Switching) is a ground-breaking new audio interface incorporating the Swiss expertise of Merging Technologies in analog and digital, networked audio and DSP technology. More significantly, it offers unique features to any engineer or musician looking for a compact AD/DA unit with the quality you would expect from Merging, and a fully featured monitor controller that integrates with any DAW. MERGING+ANUBIS SPS, has...
Our Price: $2,295.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Merging Technologies DA8 Multichannel D/A Conversion Module for Merging Technologies Horus/HAPI MKII
Merging Technologies
Item# MT-DA8
The Merging Technologies DA8 is a multichannel D/A conversion module for the Horus/HAPI MKII and has been shown in testing to be consistently the quietest multichannel D/A conversion modules available anywhere. Features: Auto-mute circuitry for "no-pop" power cycling Digitally controlled trims for line up procedures Dynamic range of 127dB (typ.) Local low phase noise oscillator circuitry Specifications: Max Line Output @ 0 dBFS (settings on +24 dBu): +25 dBu +0/-0.5...
Our Price: $1,395.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Merging Technologies DA8P Multichannel D/A Conversion Module for Merging Technologies Horus/HAPI MK11
Merging Technologies
Item# MT-DA8P
The Merging Technologies DA8P is a multichannel D/A conversion module for the Horus/HAPI MKII and has been shown in testing to be consistently the quietest multichannel D/A conversion modules available anywhere. Features: Auto-mute circuitry for "no-pop" power cycling Digitally controlled trims for line up procedures Dynamic range of 127dB (typ.) Local low phase noise oscillator circuitry Specifications: Max Line Output @ 0 dBFS (settings on +24 dBu): +25 dBu +0/-0.5 dB Frequency...
Our Price: $1,995.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Merging Technologies HAPI MKII Networked Audio Converter - OLED Display - Ravenna/AES 67
Merging Technologies
Item# MT-HAPI-MKII
The Merging Technologies Hapi MKII is the logical step up from the phenomenally successful Hapi which enjoyed record sales in 2020. HAPI is both the perfect primary interface for smaller systems as well as the ultimate accessory for a system using Horus where a smaller stagebox is required. MERGING+HAPI has been a hugely popular networked audio converter and instrumental in introducing so many to the exciting world of RAVENNA/AES67. Its economical form factor made it the ideal local...
Our Price: $2,795.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Merging Technologies HAPI MKIIR Networked Audio Converter with Redundant 12V Input - OLED Display - Ravenna/AES 67
Merging Technologies
Item# MT-HAPI-MKIIR
The Merging Technologies Hapi MKIIR is the logical step up from the phenomenally successful Hapi which enjoyed record sales in 2020. HAPI is both the perfect primary interface for smaller systems as well as the ultimate accessory for a system using Horus where a smaller stagebox is required. MERGING+HAPI has been a hugely popular networked audio converter and instrumental in introducing so many to the exciting world of RAVENNA/AES67. Its economical form factor made it the ideal...
Our Price: $2,995.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Digital Audio Denmark AX32 Base Unit - No AD/DA Converter Included
Digital Audio Denmark
Item# DAD-AX32-BASE
2 Version Available
The Digital Audio Denmark DAD-AX32-BASE is an audio routing centerpiece, digital format converter, world-class AD/DA converter and monitor controller. Quite simply, AX32R changes seamlessly between workflows in seconds, optimizing your production time and efficiency. With the AX32R versatile I/O structure and IP Audio via Layer 3 Ethernet (Dante), up-to 48 analogue audio channels and a flexible digital signalinterface, routing and distribution structure. Aes3 , MADI PLUS 2 additrional SFP...
Read More
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
Cobalt +SCTE104 Insertion and Processing Software Option for 9902-UDX/9922-FS/BBG-1002-UDX/BBG-1022-FS
Cobalt Digital
Item# CB-PLUS-SCTE104
Cobalt SCTE 104 provides a flexible and easily incorporated segment/interstitial insertion automation solution which can be propagated across the plant via baseband SDI (using the ANC space). Option +SCTE104 provides generation and insertion of SCTE 104 messages into baseband SDI. Message send can be triggered from automation GPI or other event action modes. The option can also execute card actions based on SCTE 104 messages received by the card, as well as send triggered SCTE 104 packets...
Our Price: $749.99
Availability: Software Download
Add to Wish List
Cobalt Digital 9262 Stereo AES to Analog Audio D/A Converter openGear Card
Cobalt Digital
Item# CB-9262
The 9262 features digital-to-analog audio conversion and also provides a 1x4 AES/EBU DA. It supports audio sampling frequencies from 30 kHz to 192 kHz, and converts the incoming AES digital audio signal to a stereo balanced analog audio signal pair using 24-bit conversion. Cable equalization and reclocking techniques enable the 9262 to reliably recover incoming digital audio signals over large cable lengths. Features: 24-bit audio conversion Supports audio sampling frequencies from 30 kHz to 192...
Our Price: $875.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Sonifex AVN-DIO01 Dante AoIP Network to Analog XLR Stereo Output Converter
Sonifex Ltd.
Item# SON-AVN-DIO01
The Sonifex AVN-DIO01 is a Dante AoIP network to analog XLR stereo output converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analog XLR outputs and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analog and digital audio equipment to the Dante AoIP audio network. The A/D and D/A circuitry offers 120dB...
Our Price: $515.15
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sonifex AVN-DIO02 Analog XLR Stereo Input to Dante AoIP Network Converter
Sonifex Ltd.
Item# SON-AVN-DIO02
The Sonifex AVN-DIO02 is an analog XLR stereo input to Dante AoIP network converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analog XLR inputs and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analog and digital audio equipment to the Dante AoIP audio network. The A/D and D/A circuitry offers 120dB...
Our Price: $545.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sonifex AVN-DIO04 Dante to Analog Phono Stereo Input and Output Converter
Sonifex Ltd.
Item# SON-AVN-DIO04
The Sonifex AVN-DIO04 is a Dante to analog phono stereo input & output converter in the Sonifex DIO range of Dante input/output devices. It features stereo analog input and output phono connections and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. Depending on the nature of your PoE supply, it may be necessary to earth the unit using the rear panel earth tag to maximize audio performance. All Sonifex DIO interfaces provide a...
Our Price: $652.18
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sonifex RB-ADDA2 Redbox Combined A/D and D/A Converter - 24 Bit/192kHz Capable - 1RU
Sonifex Ltd.
Item# SON-RB-ADDA2
The RB-ADDA2 A/D and D/A converter is a 1U rack-mount which produces an AES/EBU, S/PDIF or TOSlink optical level digital audio output from a balanced XLR or unbalanced phono stereo audio input. It also produces a stereo balanced XLR or unbalanced phono output from an incoming AES/EBU, S/PDIF or TOSlink optical digital input signal. The RB-ADDA2 is a high performance, enhanced version of the RB-ADDA providing the following additional features: The A/D SOURCE push-button is used to select...
Our Price: $1,489.42
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Cobalt Digital WAVE RTR 4RU 32x32 SDI/ASI/MADI Router Crosspoint with support for signals up to 12G-SDI
Cobalt Digital
Item# CB-WAVE-RTR32X32
2 I/O Options Available
Cobalt Digital introduces the WAVE RTR-32x32 12G SDI/ASI/MADI router. It is a 32x32 Crosspoint solution contained within a compact 4RU (7 inch) tall frame that is a thin 3.75 inch deep chassis. This router offers unprecedented flexibility and ease of use and integration. This unit has a single Ethernet port for IP-based protocols such as SW-P-08 and PESA PNET. The WAVE series also offers RS 422 and a RS 232 9pin serial communication ports. The integrated web server supports browser...
Read More
Our Price: $11,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
RDL DD-BN40 Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2
Radio Design Labs
Item# RDL-DD-BN40
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch...
Our Price: $855.49
Availability: In Stock
Add to Wish List
MOTU 112D Thunderbolt / AVB Ethernet / USB Audio Interface with 112 Channels of Digital I/O & MADI
Motu
Item# MOTU-112D
The 112D is a flexible digital audio interface, router, format converter, and stand-alone mixer, with connectivity to a host computer through ultra-fast Thunderbolt technology, AVB Ethernet, or class compliant, high-speed USB 2.0 (compatible with USB 3.0 and iOS). The 112D provides 24 channels of AES/EBU digital I/O, 24 channels of ADAT optical digital I/O and 64 channels of MADI for a total of 112 simultaneous digital I/O channels. With near-zero latency, send any input to any output, or multiple...
Our Price: $1,495.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
NTP CARD-2MADI Dual MADI I/O Card without SFP Modules
NTP Technology
Item# NTP-CARD-2MADI
The NTP CARD-2MADI is a Dual MADI I/O Card with 2 x 64 Channels, Built in Sample Rate Conversions on Input, Choice of Physical Interface; SFP / Coax or Optial, MM or SM, Redundant Mode, Auto Switch-over in case of signal loss Features: 2 x MADI I/O 2 x 64 channels 8 cards = 1024 channels Built-in Sample Rate Converter on input Choice of physical interface Select type of SFP module Optical, MM or SM Coax Redundant mode Auto switch-over in case of signal loss Specifications:
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
NTP MOD-SFP-COAX Coax MADI Transceiver SFP with HD/Mini BNC
NTP Technology
Item# NTP-MOD-SFP-COAX
The NTP MOD-SFP-COAX is a Coax MADI Transceiver SFP with HD/Mini BNC Features: Specifications:
Availability: In Stock
Item Details
Ferrofish PULSE 16 - 16 In / 16 Out AD/DA Converter with ADAT
Ferrofish
Item# FER-PULSE-16
The Ferrofish PULSE16 is the high-quality solution to connect a wide range of external analog and ADAT studio equipment to a mixer or a computer interface. The high-density converter provides 16 x 16 balanced analoge TRS-I/Os and can handle pro studio levels up to +20dBu - adjustable in 1 dB steps. 2 x 4 ADAT ports provide full 16 x 16 channel operation - even with up to 96 kHz. The optical ADAT `Lightpipe' interface is still the most affordable way to transfer a variety of audio channels....
Our Price: $1,099.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
NTP CARD-SPQ 128 Channel Speaker Processor Card
NTP Technology
Item# NTP-CARD-SPQ
The NTP CARD-SPQ system consist of a DSP card that you can install in one of the 8 card slots of AX32. The SPQ Speaker Processor System is extremely flexible and you can match it to any speaker configuration, including immersive audio formats such as Dolby Atmos. Management of the controls is handled via the DADman control software, where you can configure processing for all output channels in the defined monitor profile – also on cue signals. Processing can be applied for room tuning, bass...
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details
RDL DD-BN2ML Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2
Radio Design Labs
Item# RDL-DD-BN2ML
The DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line...
Our Price: $707.83
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
C2G CG40019 TOSLINK Optical to Coaxial Digital Audio Converter (TAA Compliant)
C2G - Cables To Go
Item# C2G-CG40019
2 Converters Available
Need more coaxial digital inputs on your receiver? Most receivers only have one coaxial digital input but have several optical inputs. This C2G 40018 coaxial to optical converter will connect the coaxial digital audio output from your DVD player, cable or satellite receiver to a TOSLINK optical input. Don't buy a new receiver, just change media formats and get full digital signal sound quality. Power supply included. Installation is simple; just connect the cables to the converter and...
Read More
Our Price: $48.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL DD-RN42 Bi-Directional Mic/Line Dante Interface 4 x 2 w/PoE - 2 XLR In / 2 Out on Rear-Panel Terminal Block - White
Radio Design Labs
Item# RDL-DD-RN42
3 Color: Available
The DD-RN42 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, two balanced line inputs on a rear-panel detachable terminal block and two balanced line outputs on front-panel XLR jacks. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN42 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The...
Read More
Our Price: $771.12
Availability: In Stock
Add to Wish List
Sonifex AVN-DIO03 Dante to Headphone Outputs with Volume Control and Limiter - 1/4 Inch & 3.5mm Jacks
Sonifex Ltd.
Item# SON-AVN-DIO03
The Sonifex AVN-DIO03 is Dante AoIP network-to-headphones converter in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. A limiter with threshold setting and LED indication can be switched in to prevent over-shooting and protect hearing. The front panel potentiometer adjusts headphone volume from mute (fully anticlockwise) to +6dB of gain when...
Our Price: $621.73
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Digital Audio Denmark DADCORE256 Half Rack Multi-Channel Audio Interface - 256-Ch Thunderbolt 3 / 256-Ch Dante I/O
Digital Audio Denmark
Item# NTP-DADCORE256
Core 256 may not take up much space, but the power you can squeeze out of this little box might just make your jaw drop to the floor. With tons of channels, a wide palette of digital connectivity, built-in SPQ processing, Eucon control compatibility, internal summing engine and drivers for macOS and Windows 10, it is a pristine digital audio interface by any measure and for just about any application. However, there is one application that should be emphasized in particular: Core 256 is simply...
Our Price: $2,999.00
Availability: In Stock
Add to Wish List
Blustream DA22XLR-WP-US Dante 2+2 XLR Dual Gang Wall Plate
Blustream
Item# BLU-DA22XLR-WP
The Blustream DA22XLR-WP is a multi-input / output wall plate to convert analog audio within a digital Dante networked audio system. The DA22XLR-WP converts 2 input channels of balanced / unbalanced / MIC audio with switchable 48v Phantom power to Dante digital audio, and 2 channels of Danter audio to 2 output channels of balanced / unbalanced audio. The DA22XLR-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for...
Our Price: $490.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
PENTA-615-600A-PAN 19 Inch 1U Control Panel with 24 User-Programmable Keys and Displays
PENTA a division of NTP
Item# PENTA-615600APAN
3 Options Available
The Penta 615 Remote Control Panels are designed for remote control of the Penta 720/721s, DAD (Digital Audio Denmark) AX32 and DAD DX32R either through a direct connection or in combination with the 635 Router Controller. Direct Control Mode The Penta 615 Control Panel will communicate directly with the Penta 720 Audio Router via Direct Control Mode (DCM), i.e. there is no need for any further devices or software. The DCM mode is ideal for small and simple router solutions...
Read More
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Item Details

Digital Audio Converters are becoming increasingly common as we advance into the digital age. Whether you need to convert digital audio to analog, or analog audio to digital, Markertek has the solution! We stock Digital Audio Converters from leading broadcast manufacturers like Ward-Beck, Antelope Audio, Ensemble Designs, Cobalt Digital and more. Choose from compact standalone/inline devices to full-scale rackmount and open-frame configurations. We even carry hardware/software packages for non-linear editing.

Sign In

Digital Audio Converters

Narrow Products

By Brand

By Price Range

Filter By