IP Audio Codecs

The Instreamer encodes analog audio sources in real time in a configurable format (MP3, PCM, G.711,G.722) and streams via TCP, UDP, Shoutcast, Multicast RTP format to configurable destinations. Used in high quality broadcast applications, surveillance and VoIP markets alike, the Instreamer has proven its simplicity where Audio over IP encoding is required. Features: G711, G.722, PCM linear Encoding MP3 Encoding (low Latency) Shoutcast/Icecast Source capability Audio Level Supervision with SNMP Trap...

The Exstreamer 100 decodes IP Audio streams and play out the recieved Audio signal to amplifiers or speakers. Supporting a large number of protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio, as well as VoIP applications. Control and local storage interfaces are device specific to match different use cases. Features: AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding IP Streaming via TCP, UDP, RTP, Multicast Line Level Output (Stereo) RS-232...

Professional Multiprotocol IP Audio Encoder/Decoder with I/O, balanced audio. Support of Internet Radio and ®VoIP(SIP, RTP) codecs and protocols make the products the ideal choice for broadcast, professional and ®VoIP applications. Applications: Live IP Audio Encoder for Streaming Applications. Generic, bidirectional full-duplex ®VoIP module for Paging and Intercom Applications. Paging and Audio Distribution with Amplifier control and monitoring Shoutcast/Icecast...

IP Audio Decoder, PoE Powered with up to 6W Amplified Output on Screw Terminal Block to Drive Loudspeakers The Barix 2020.9301P IP Former can be attached to any loudspeaker either while in production or in existing installations. It enables audio-streaming over the internet with a reliable, fast-reactive connection, storing capabilities and VoIP/SIP negotiation. Installers can just sell an upgrade to existing installations and setups. Producers can offer an IP speaker without additional...

Digigram PYKO-in is a stereo IP audio encoder that can be used in two modes. One mode allows converting the analog audio source into an IP audio stream sent to one or several destinations. Typical applications include STL, WEB radio encoding, background music, and paging. Combined with PYKO-out, PYKO-in is a cost effective solution for establishing IP audio links. Another mode allows using PYKO-in as a mono encoder/decoder; typical applications include intercom over IP. At a glance PYKO-in...

The Barix Exstreamer M400 feeds your PA and turns it into a extensive Audio over IP system. A wide variety of audio environments, such as SIP, InformaCast and Syn-Apps are supported. Codecs include PCM, AACplus, MP3, OPUS, G.711, G.722 that can be streamed using HTTP and RTP. Audio files can be stored on the internal memory and their playback can be trigger ed via a simple UDP command. Thanks to the priority handler, the Exstreamer M400 can be configured to switch between sources...

The Barix Instreamer ICE encodes analog audio sources in real time in a configurable format (MP3, PCM, G.711,G.722) and streams via TCP, UDP, Shoutcast, Multicast RTP format to configurable destinations. Used in high quality broadcast applications, surveillance and VoIP markets alike, the Instreamer has proven its simplicity where Audio over IP encoding is required. The Instreamer ICE also has an Icecast server built in and is able to feed up to 50 web radio listeners directly...

M400 SIP Opus Enc/Dec The Barix M400 allows to establish a link between devices using standard SIP protocol in peer-to-peer mode or through a SIP server. The unit provides an Opus encoded stereo link with line audio input or output. It also supports USB sound devices. Other common VoIP codecs including G.711 and G.722 are supported. This makes the BARIX M400 SIP Opus Encoder/Decoder the ideal product for high quality audio distribution or contribution in a SIP based environment. Thanks...

Connect with confidence using the SmartNode 5600 Series eSBC with an integrated enterprise router to a SIP trunk or hosted PBX service. The SN5600 supports up to 1,000 SIP to SIP calls. The SN5600 acts as eSBC, access router, and QoS CPE all in one device. It can also undertake network assessment and monitoring at the customer premise by using Patton Cloud network monitoring to prevent or reduce and resolve network and voice quality problems. Whether used as an Enterprise...

Pro Solutions Can 8x8 - Provides 8 relay inputs and 8 relay outputs via CAN connector on the rear of Commander Rack unit (or i-Mix G3). Features: Specifications: