Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST

 

View As:

Sort By:

Display:

Impedance Matching Transformers:

Page:

►►
    ◄◄
     
     
     
    • Canare BCJ-XJ-TRC XLR-F 110 Ohm to BNC-F 75 Ohm Impedence Transformer

      Canare BCJ-XJ-TRC XLR-F 110 Ohm to BNC-F 75 Ohm Impedence Transformer

      110 - 75 ohm Impedance Transformer
      XLR3: Female
      BNC: Female
      Pack Qty: 1 pc

      Canare Impedance Transformers are designed to convert 2-channel digital audio signals between balanced 110 ohms XLR and unbalanced 75 ohms BNC. This cost effective adapter allows you to switch from a limited length microphone cable to a much longer, IMPEDANCE MATCHED 75 ohms coax cable. Now, conveniently route D1, D2, R-DAT and DAW signals via 75 ohms Canare Video Patchbays, BNC plugs and super flexible Coaxial Cable.

      APPLICAT


         

        Read More

        Item #: BCJ-XJ-TR

        Availability: In Stock

        Our Price: $27.89

        Add to Wishlist
      • Canare BCJ-XP-TRC BNC-F In to XLR-M Out Impedence Transformer Plug

        Canare BCJ-XP-TRC BNC-F In to XLR-M Out Impedence Transformer Plug

        110 - 75 ohm Impedance Transformer
        XLR3: Male
        BNC: Female
        Pack Qty: 1 pc

        Canare Impedance Transformers are designed to convert 2-channel digital audio signals between balanced 110 ohms XLR and unbalanced 75 ohms BNC. This cost effective adapter allows you to switch from a limited length microphone cable to a much longer, IMPEDANCE MATCHED 75 ohms coax cable. Now, conveniently route D1, D2, R-DAT and DAW signals via 75 ohms Canare Video Patchbays, BNC plugs and super flexible Coaxial Cable.


        APPLICATIO


           

          Read More

          Item #: BCJ-XP-TR

          Availability: In Stock

          Our Price: $28.89

          Add to Wishlist
        • RDL TX-J2 Unbalanced Input Transformer

          RDL TX-J2 Unbalanced Input Transformer

          • Mix two unbalanced audio signals to mono balanced
          • Combine stereo into mono with balanced output
          • Unbalanced to balanced conversion without gain
          • Hum cancellation on unbalanced line inputs
          • Frequency response 30 Hz to 20 kHz (+/- 1 dB)

           

          Read More

          Item #: TX-J2

          Availability: In Stock

          Our Price: $57.49

          Add to Wishlist
        • DSAN LSP-1 Laptop SoundPort

          DSAN LSP-1 Laptop SoundPort

          Model LSP-1 is a compact adapter that plugs into a laptop computer speaker jack, changes the output to a balanced mono mic-level signal and mates with standard XLR audio cable for connections to a house audio system. A ground lift switch assures a hum-free interface. On-board volume control.

           

          Read More

          Item #: DSA-LSP-1

          Availability: In Stock

          Our Price: $65.53

          Add to Wishlist
        • RDL STP-1 Universal Audio Attenuator - 2 Channel

          RDL STP-1 Universal Audio Attenuator - 2 Channel

          The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads. Multi-turn trimmers in the STP-1 permit precise adjustment of levels without the need to connect any jumpers or external resistors. The STP-1 operates in either high or low impedance, balanced or unbalanced circuits. The wiring legend is printed on the case for easy installation.

          • Audio Level




           

          Read More

          Item #: STP-1

          Availability: In Stock

          Our Price: $59.49

          Add to Wishlist
        • Sescom SES-OTLMAX RCA to XLR Pro Match Audio Level Converter VU & Level Controls

          Sescom SES-OTLMAX RCA to XLR Pro Match Audio Level Converter VU & Level Controls

          The SES-OTLMAX is a feature rich audio line level format converter for simultaneous conversion of Balanced to Unbalanced and back for audio signals with level control and VU metering.

          The product is provided with XLRs for Balanced I/O and RCA for Unbalanced I/O. There is also a 3.5mm (1/8") stereo input (iPod/MP3 compatible) as well as a monitor output for the Balanced line out, which can be fed to a regular stereo amplifier for real time monitoring.

          The SES-OTLMAX allows you to switch a -10 to

           

          Read More

          Item #: SES-OTLMAX

          Availability: In Stock

          Our Price: $184.95

          Add to Wishlist
        • Henry Engineering USB Matchbox II USB-XLR Multi-Mode Stereo Codec

          Henry Engineering USB Matchbox II USB-XLR Multi-Mode Stereo Codec

          The Henry Engineering USB Matchbox II combines the best features of our past USB products into one unit! It uses Burr-Brow's recently updated phase coherent codec for superb audio quality, and sports both analog and digital outputs. The USB Matchbox II features balanced analog inputs and outputs on XLRs, plus an AES/EBU digital output, and a handy Headphone jack on the front panel. Just plug-and-play for great audio with USB convenience and reliability!

          The USB Matchbox II is a professional USB-t




             

            Read More

            Item #: USBMATCHBOX2

            Availability: Usually ships in 3-10 business days

            Our Price: $499.29

            Add to Wishlist
          • Sescom SES-AES-EBU-1 XLRF to 75 Ohm BNC Female AES/EBU Impedance Transformer

            Sescom SES-AES-EBU-1 XLRF to 75 Ohm BNC Female AES/EBU Impedance Transformer

            Sescom SES-AES-EBU-1 110 Ohm Female XLR In to 75 Ohm BNC Female Out AES/EBU Impedance Transformer.

            • 110 Ohm Female XLR to 75 Ohm AES-EBU in-line transformers
            • BNC to 3-Pin XLR Receptacle (male & female versions)
            • Provides an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion
            • Perfect for medium haul cable runs
            • Also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that have greater attenuation at relevant

               

              Read More

              Item #: SES-AES-EBU-1

              Availability: In Stock

              Our Price: $16.95

              Add to Wishlist
            • GefenTV GTV-DD-2-AA Dolby Digital to Analog Audio Decoder

              GefenTV GTV-DD-2-AA Dolby Digital to Analog Audio Decoder

              The GefenTV Digital Audio Decoder takes audio encoded in Dolby Digital (at up to 5.1 channels) from your multichannel S/PDIF or TOSLINK digital audio source and converts it to L/R analog audio -- without the need for any other external equipment!



              With the GefenTV Digital to Analog Decoder you can listen to digital audio sources such as DVD and CD players or digital computer audio on your legacy analog sound system, preserving your current investment.

              • Converts S/PDIF or TOSLINK digital audio to L/R

                 

                Read More

                Item #: GTV-DD-2-AA

                Availability: In Stock

                Our Price: $97.95

                Add to Wishlist
              • RDL FP-UBC2 Unbalanced to Balanced Converter - 2 Channel

                RDL FP-UBC2 Unbalanced to Balanced Converter - 2 Channel

                The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is provided for each channel.

                The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a -10 dBV unbalanced input. The gain is adjustable -5 dB

                   

                  Read More

                  Item #: FP-UBC2

                  Availability: In Stock

                  Our Price: $171.49

                  Add to Wishlist
                • RDL TX-1A Balanced to Unbalanced Transformer - Adjustable

                  RDL TX-1A Balanced to Unbalanced Transformer - Adjustable

                  • Provides transformer isolation between balanced line and unbalanced input
                  • Level trimpot adjusts output 4 to 24 dB below input level
                  • Input may be 10 k Ohm bridging or 600 Ohm terminated
                  • Frequency response 20 Hz to 20 kHz (+/- 0.5 dB)
                  • THD: < 0.05% (1 kHz)

                   

                  Read More

                  Item #: TX-1A

                  Availability: In Stock

                  Our Price: $35.49

                  Add to Wishlist
                • LEN 3GF01 3G Ground Isolator

                  LEN 3GF01 3G Ground Isolator

                  Traditional "Humbucker" and Isolation Transformer approaches to interference are not applicable to SDI signals. Mains hum is well below the SDI signal frequency spectrum and (unlike analogue video) the SDI signal is not sensitive to near-DC attenuation. However, the problems of signal distortion and operator shocks caused by a voltage difference between two pieces of equipment connected by a HD-SDI signal feed still exist.

                  The L E N 3G Ground Isolator uses a broadband highpass filter to provide D

                     

                    Read More

                    Item #: 3GF01

                    Availability: Usually ships in 3-10 business days

                    Our Price: $144.36

                    Add to Wishlist
                  • Radial ProAV1 Passive 1 Channel DI w/RCA 3.5mm  XLR & 1/4in Inputs

                    Radial ProAV1 Passive 1 Channel DI w/RCA 3.5mm XLR & 1/4in Inputs

                    The Radial ProAV1 and ProAV2 are passive direct boxes specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are merged via a resistive mixer to mono, greatly simplifying signal management and the ProAV2 has full two-channel stereo functionality.

                    To eliminate the need for various adapter, a 'Swiss Army' array of connections are provided. including 1/4" for instruments, RCA and 1/8" connectors for consumer electronics and computers and a


                       

                      2 Types Available

                      Item #: RAD-PROAV1

                      Availability: In Stock

                      Our Price: $119.99

                      Add to Wishlist
                    • GefenTV GTV-DIGAUD-2-AAUD Digital Audio to Analog Adapter

                      GefenTV GTV-DIGAUD-2-AAUD Digital Audio to Analog Adapter

                      The Digital To Analog Audio converter box takes your coaxial/optical (S/PDIF or TOSLink) digital audio source and converts it to standard analog left/right audio, available for connection to an external device such as an amplifier or recording deck via standard RCA-style jacks. Now you can bridge your legacy sound system with digital sources such as DVD and CD players that don't have RCA-style analog outputs.

                      • 2-channel LPCM (Linear Pulse Code Modulation)
                      • 24-bit S/PDIF incoming bitstream on le

                       

                      Read More

                      Item #: GTV-DIG-2-AAUD

                      Availability: In Stock

                      Our Price: $59.95

                      Add to Wishlist
                    • Sescom SES-AES-EBU-2 BNC Female to XLR-M AES/EBU Impedance Transformer

                      Sescom SES-AES-EBU-2 BNC Female to XLR-M AES/EBU Impedance Transformer

                      • 75 Ohm BNC to 110 Ohm Male XLR AES-EBU in-line transformers
                      • BNC to 3-Pin XLR Receptacle (male & female versions)
                      • Provides an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion
                      • Perfect for medium haul cable runs
                      • Also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that have greater attenuation at relevant frequencies
                      • Max Voltage / Max Run:= 5VPP / 250MW
                      • 0.1 MHZ TO 6 MHZ
                      • Insertion Loss < 0.3DB @ 0.1 MHZ

                       

                      Read More

                      Item #: SES-AES-EBU-2

                      Availability: In Stock

                      Our Price: $16.95

                      Add to Wishlist
                    • Sescom SES-NORMAL-HDMI HDMI SRSTrue Volume Leveler

                      Sescom SES-NORMAL-HDMI HDMI SRSTrue Volume Leveler

                      The Sescom SES-NORMAL-HDMI Volume Leveler is an advanced HDMI to HDMI audio repeater and decoder that incorporates SRS TruVolume® technology.

                      This device prevents annoying fluctuations and helps maintain normal listening volumes during spikes such as action scenes, commercials and EAS tests. The EAS test is a necessary and extremely critical notification service for emergency broadcasts.

                      By utilizing the SES-NORMAL-HDMI the listener/viewer will be able to comfortably relax and enjoy their

                       

                      Read More

                      Item #: SES-NORMAL-HDMI

                      Availability: In Stock

                      Our Price: $124.00

                      Add to Wishlist
                    • Laptop Interface for Connecting Computers to a Pro Sound System

                      Laptop Interface for Connecting Computers to a Pro Sound System

                      Connect your laptop's headphone or audio out to a professional sound system. Stereo or summed mono operation selectable by user. Built in ground lift switches to eliminate hum, and a -20db pad. The stereo 3.5mm plugs directly into your computer's output jack. Outputs are left and right XLR males.

                      • Connect your laptop's headphone or audio out to a professional sound system
                      • Stereo or summed mono operation selectable by user
                      • Built in ground lift switches to eliminate hum, and a -20db pad
                      • The stereo 3.5m


                       

                      Read More

                      Item #: LTI-100

                      Availability: In Stock

                      Our Price: $95.00

                      Add to Wishlist
                    • Ward-Beck IMP-20 Impedance Transformer Panel - 20 Screw Terminals to BNC 1 RU

                      Ward-Beck IMP-20 Impedance Transformer Panel - 20 Screw Terminals to BNC 1 RU

                      The IMP-20 offers the highest density of 110 to 75 Ohm or 75 to 110 Ohm impedance converters in one rack unit of space. Balanced 110 AES/EBU signals are connected via 3-pin pluggable screw terminals while unbalanced 75 Oh connections are via BNC connectors. Twenty circuits in all are provided and since the 110 Ohm connectors the all the same type they may be used freely for conversion in either direction. Pluggable screw terminations are on one side while the BNCs are located on the opposite


                         

                        Read More

                        Item #: WARD-IMP-20

                        Availability: Usually ships in 3-10 business days

                        Our Price: $794.00

                        Add to Wishlist
                      • Sescom SES-NORMALIZE-IT SRS True Volume Audio Regulator

                        Sescom SES-NORMALIZE-IT SRS True Volume Audio Regulator

                        The Sescom SES-NORMALIZE-IT Volume Leveler incorporates SRS TruVolumeT technology can regulate Audio like TV commercial volume levels to a comfortable listening level within a certain range, preventing annoying fluctuations while you channel surf as well as taming those aforementioned obnoxious commercials. It also enables you to hear everything that you've been missing when the volume is set to a lower level, by increasing very low audio material within the program. Also this can be used not ju

                         

                        Read More

                        Item #: SES-NORMALIZE-IT

                        Availability: In Stock

                        Our Price: $98.95

                        Add to Wishlist
                      • Rolls MB15B 3.5mm / RCA / XLR ProMatch Converter

                        Rolls MB15B 3.5mm / RCA / XLR ProMatch Converter

                        The New Replacement for the Popular MB15 Pro Match Now Adds a 3.5mm Input for Conversion to XLR or RCA Output!

                        The MB15B ProMatch converts consumer level 3.5mm Stereo or Stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA outputs. The other side labeled 2, has both a 3.5mm stereo input and stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED indicates that power is applied to the

                             

                            Read More

                            Item #: MB-15B

                            Availability: In Stock

                            Our Price: $57.95

                            Add to Wishlist
                          • RDL RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA Jacks

                            RDL RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA Jacks

                            The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels. The RU-UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line-level unbalanced outputs for each of the two inputs.

                            The RU-UDA4 performance is tailored around industry standard -10 dBV input/output levels. Excellent fre

                               

                              Read More

                              Item #: RU-UDA4

                              Availability: Usually ships in 3-10 business days

                              Our Price: $167.95

                              Add to Wishlist
                            • Allen Avionics AGL-600 Audio Ground Loop Isolation Transformer

                              Allen Avionics AGL-600 Audio Ground Loop Isolation Transformer

                              • Isolation Between Channels: 100 dB minimum
                              • Input Connectors: 3-Pin XLR Female & 1/4" Phone Jack
                              • Output Connectors: 3-Pin XLR Male & 1/4" Phone Jack
                              • Dimensions: 5-3/8" x 4" x 2"
                              • Impedance: AGL-10K: 10K Ohm Input & Output. AGL-600: 600 Ohm Input & Output
                              • Bandwidth: 300KHz
                              • Isolation: 100 Megohms, minimum
                              • Insertion Loss: Less than .5dB
                              • Package: Hi-Impact ABS Plastic
                              • AGL-10K Input & Output Connector: 1/4" Phone Jack Input & Output
                              • AG

                               

                              Read More

                              Item #: AGL-600

                              Availability: Direct Ship From Manufacturer

                              Our Price: $127.55

                              Add to Wishlist
                            • Neutrik NADITBNC-F XLR Female 110 Ohm to BNC Female 75 Ohm Adapter

                              Neutrik NADITBNC-F XLR Female 110 Ohm to BNC Female 75 Ohm Adapter

                              In addition to the original NA-BF/NA-BM adapters, two new versions in this series are now available. The BNC to 3-Pin XLR Receptacle (male & female) and the BNC to XLR cable end (male & female). Developed to provide and excellent impedance transformer at a reasonable cost for meeting the needs between analog & digital applications. Use of these adapters also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that present high attenuation values at relevant

                                 

                                4 Types Available

                                Item #: NA-BF

                                Availability: In Stock

                                Our Price: $35.52

                                Add to Wishlist
                              • Shure A15AS 15dB / 20dB / 25 dB Switchable Attenuator

                                Shure A15AS 15dB / 20dB / 25 dB Switchable Attenuator

                                A15AS - Switchable Microphone Attenuator prevents preamp overload in applications where very strong signals are applied to a mic input. Provides 15, 20 or 25 dB attenuation.

                                A15BT - Bridging Transformer matches balanced or unbalanced devices of different impedances.(33 kilohm primary, 600 or 7,500M ohm secondary).

                                A15HP - High Pass Filter provides a low frequency cutoff to reduce unwanted low-frequency noise in mic signals.

                                A15LA - Line Adaptor provides 50 dB attenuation, allowing a balanced line-l

                                 

                                5 Transformers Available

                                Item #: A15AS

                                Availability: In Stock

                                Our Price: $41.99

                                Add to Wishlist
                              • Whirlwind ISOXL Line-Level Isolation Transformer

                                Whirlwind ISOXL Line-Level Isolation Transformer

                                This is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation. The shield is lifted from input to output.

                                 

                                Read More

                                Item #: ISOXL

                                Availability: In Stock

                                Our Price: $39.95

                                Add to Wishlist
                               

                              Page:

                              ►►
                                ◄◄
                                 
                                 
                                 
                                 

                                Impedance Matching Transformers

                                Impedance Matching Transformers create compatible signals between microphones, line-level devices, laptops, digital 75 ohm and 110 ohm AES/EBU devices. For example, Impedance Matching Transformers allow you to connect a professional studio microphone to a computer or other "consumer" style recording device. In addition, Impedance Matching Transformers allow the connection of consumer CD players, tape decks or other devices to the XLR inputs of a Professional mixing console. Every Audio Engineer and Technician should have a variety of Impedance Matching Transformers in their toolbox to ensure the show goes on! Speak with a Markertek representative today and ensure you choose the Matching Transformer that best suits your application.