Where to Buy TimeCode Displays | Time Code Readers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

ESE ES-410 GPS Based Frequency Generator
ESE
Item# ESE-ES-410
The ES-410 generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form, four Sine Wave and four Square Wave outputs are provided. The 1 PPS output is a 50% duty, 5 volt logic signal, positive-edge coinciding with the UTC seconds change. An ESE TC90 Time Code output is also provided for driving remote time displays. A USB interface allows configuration...
Our Price: $1,764.24
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-160F/NTP6 Master Clock w/ NTP6 Opt - NTP Server Allows Sync of Computer networks & LAN Control - IPv6 Compatible
ESE
Item# ES-160F-NTP6
The ESE ES-160F-NTP6 is a crystal-based Master Clock / Time Code Generator with the NTP6 Option. NTP Time Server: Network Time Protocol Output with IPv6 & Network Control input via Ethernet (10/100Base-T, RJ-45). The unit employs a temperature compensated crystal oscillator (TCXO) which provides the ES-160F with an accuracy of one second per month. Six .56" yellow LED's display the real time or date while the unit simultaneously generates several types of time code. The unit provides a Coin...
Our Price: $2,039.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-976 Time Code Remote Display - Red LED
ESE
Item# ESE-ES-976
The ES-976 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 43" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time Code (TC76, TC89, or TC90), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud). The ES-976 will automatically determine which code is being received. If receiving ESE Time Code from a timer, the unit...
Our Price: $1,100.66
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-455/SD/1 HD & SD SMPTE Time Code Reader/Video Inserter
ESE
Item# ESE-HD-455-SD-1
The HD-455/SD/1 is an HD & SD Timecode Reader/Video Inserter. The unit reads SMPTE-LTC/EBU (bi-directionally from 1/30th to 20x play speed), D-VITC or RP-188 and inserts that timecode onto an SDI video signal. The timecode can also be embedded into the D-VITC or RP-188. Error detection/correction for LTC may be enabled for reading analog audio tracks, or disabled for reading SMPTE Up/Down Timers. Additionally, up to 30 characters of user defined text may be inserted into the...
Our Price: $1,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 103F GPS Master Clock/Time Code Generator - IRIG-B / ASCII (RS-232 & USB) - 1 3/4 Inch Rackmount
ESE
Item# ESE-ES-103F
The ESE ES-103F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-103F generates several types of time code including ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-103F to easily interface with new or existing computers, automation and clock systems. A...
Our Price: $1,559.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Remote Display - RED LED Display
ESE
Item# ES-943U
4 Colors Available
The ESE ES-943U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the...
Read More
Our Price: $831.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display in Wall Mount Enclosure w/ Option NTP-C
ESE
Item# ESE-ES-943U-NTP
The ESE ES-943U/NTP-C is a Time Code display featuring 4.0" bright red LED displays & Option NTP-C (. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP...
Our Price: $885.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-993U-NT 2.3 Inch 6-Digit (Hr Min & Sec) ESE/SMPTE/EBU/ASCll Time Display 12 Inch - Red
ESE
Item# ES993U-NTPCPOE-R
The ESE ES-993U/NTP-C is an NTP Time Display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 12" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. *Note: This version is the ES-993U with...
Our Price: $653.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Display - Wall Mount Enclosure Time Code Remote Display
ESE
Item# ES 993U
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine...
Our Price: $598.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier
ESE
Item# ES-249
The ES-249 is designed to accept an RS232C/ASCII signal and output up to eight identical copies.The unit has a single input and eight outputs that are accessible on rear-mounted 9-pin D-sub connectors. Due to the nature of the RS232Csignal, if long runs of cable are required, it may be necessary to distribute a different time code that is then "translated" into RS232C/ASCII before entering the "user." Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-103U Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code. 9 Yellow LED Digits .56 Inch
ESE
Item# ES 103U
The ES-103U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... IRIG-B, ASCII (RS-232C & USB), SE-TC89 and ESE-TC90. Nine amber LED displays (.55") provide a digital display of the Day of Year, Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard...
Our Price: $1,562.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure
ESE
Item# ES 166U
2 Versions Available
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Read More
Our Price: $337.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Option HR - Relay Contact Closure
ESE
Item# ES-101-HR
The ES-101 is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of three (3) different types of time code. ... ASCII (RS-232C), ESE-TC89T and ESE-TC90T. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously,...
Our Price: $992.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ES 102U GPS Based Time Code Generator (Options K and 10ns)
ESE
Item# ES-102U-K-10NS
2 Versions Available
The ES-102U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... SMPTE / EBU, ASCII (RS-232C & USB), ESE-TC89T and ESE-TC90T. Six amber LED displays (.55") provide a digital display of the Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features....
Read More
Our Price: $2,037.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-104E-P-J GPS Based NTP Time Server with 19 Inch Front Panel Rackmount & 220 VAC/50 Hz Operation Option
ESE
Item# ES-104EPJ
The ESE ES-104E-P-J provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-104E is an IPV4/IPV6 compatible NTP Time Server. NTP...
Our Price: $1,395.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator
ESE
Item# ES-185F
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $2,370.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-188J NTP Referenced Master Clock/Time Code Generator with 220 VAC/50 Hz Operation Option
ESE
Item# ES-188-J
The ES-188 is an NTP referenced Master Clock and Time Code Generator. It displays nine digits (Day of Year, Hour, Minute & Second) of time as received via a user selected NTP server. Simultaneously, the ES-188 generates several types of time code including SMPTE LTC, ESE-TC89, ESE-TC90, ASCII (RS-232C & USB), EBU, IRIG-B and a 1PPS signal. These outputs allow the ES-188 to easily interface with new or existing computers, automation and clock systems. Option J is a 220 VAC/50 Hz...
Our Price: $2,085.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-372U Console Mount Time Code Slave Display
ESE
Item# ES-372
The ES-372U is a small Time Code display designed to fit in a console mount application. The unit accepts, via a rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. The ES-372U will automatically determine which code is being received. Rear-mounted connector terminals provide access to various mode functions, such as Time Zone offset, 12/24 Hour format, display blanking and Date display (if incoming time code contains Date information, such as ESE TC90...
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-455SMPTE Time Code Reader / Video Inserter
ESE
Item# ES-455
The ES-455 is a microprocessor-based unit which read and video insert SMPTE time code. All controls are front panel mounted while the inputs and outputs are accessible via rear mounted connectors. The ES-455 reads bi-directionally at multi-speed (1/30 to 20x play speed). Position, Size & Brightness controls for the video insert are provided on the ES-455. Features: "Hold" control Reads Time or User Bits (front panel selectable) Inserts white characters on black window Bi-directional, 1/30 to...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-455U SMPTE Time Code Reader and Video Inserter
ESE
Item# ES-455U
The ES-455U from ESE is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours, Minutes, Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size, Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked,...
Our Price: $755.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 466 SMPTE/EBU Presettable Up/Down Timer with Rack Mount Option
ESE
Item# ES-466-P
The ES-466 is an eight digit, presettable 24 hour SMPTE Up/Down Timer (00:00:00:00 - 23:59:59:29) with five front panel mounted controls (UP, DOWN, STOP, RESET and PRESET) and an eight digit display. All displays are 0.56" amber LED digits. A SMPTE output is provided on the rear panel XLR connector. The "Bit Order Forward" toggle switch on the rear panel allows the unit to mimic decks that always output "forward" bit order code. EBU Time code is optional. Features: SMPTE Time Code output, EBU optional...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-491VITC Time Code Reader
ESE
Item# ES-491
The ES-491 is designed to read and display SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch). Hours, Minutes, Seconds and Frames are displayed. Decimal points on the display indicate the Video Field and Drop-Frame mode. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification...
Our Price: $422.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ES-736 4-Digit Stand Clock w/10 Outputs & 100 Programmable Events
ESE
Item# ES-736
The ES-700 Series is a family of programmable event controllers that provide a number of contact closure outputs at predetermined times. These controllers allow the user to automate multiple events with simple programming. Various Models are available from Time Code Readers (ESE, SMPTE/EBU, IRIG) to Stand-Alone Clocks and Elapsed Timers with Thumbwheel, Keypad or PC Interface programmability. Features: Compares SMPTE / IRIG / ESE Time Code (depending on model) Units Available with Thumbwheel,...
Our Price: $1,135.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE The ES-911/TSM Time Sync Machine Master Clock
ESE
Item# ES-911/TSM
The ES-911/TSM is a Stand-Alone (manually settable) Master Clock and Time Code Generator. The unit is specifically designed for a PSAP (Public Safety Answering Point) as a Master Clock and is capable of "Time Synchronizing" all components of a PSAP. The unit displays six digits of time in either 12 or 24 Hour format and utilizes a Quartz timebase for high accuracy. Date information is also available on all time code outputs. The ES-911/TSM generates several types of time code - IRIG-B, IRIG-E,...
Our Price: $916.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Blue LED Time Code Reader In Desk Mount Enclosure w/ Options NTP-C - P & PoE
ESE
Item# ES166UENTPCPBLUE
The ES-166UE is a Time Code display featuring 1" Blue LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Our Price: $502.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

At first glance, Time Code Generators & Readers may seem mysterious, but they are a common workhorse in video and film production. Without Time Code Generators & Readers many edits would be impossible to achieve, and others would take more effort than they should.Time code gives each frame of video a unique "name" so that you (or anyone else) can find whatever scene you want. With time code, you can go through raw footage, pick a scene, take down the time code of the frame at the beginning of the scene and at the end of the scene. Anyone can now edit the scene perfectly. ShopTime Code Generators & Readersfrom Markertek, Your Pro AV source!

Time Code Generators & Readers

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

ESE ES-410 GPS Based Frequency Generator

ESE ES-160F/NTP6 Master Clock w/ NTP6 Opt - NTP Server Allows Sync of Computer networks & LAN Control - IPv6 Compatible

ESE ES-976 Time Code Remote Display - Red LED

ESE HD-455/SD/1 HD & SD SMPTE Time Code Reader/Video Inserter

ESE ES 103F GPS Master Clock/Time Code Generator - IRIG-B / ASCII (RS-232 & USB) - 1 3/4 Inch Rackmount

ESE ES-943U Universal Time Code Remote Display - RED LED Display

ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display in Wall Mount Enclosure w/ Option NTP-C

ESE ES-993U-NT 2.3 Inch 6-Digit (Hr Min & Sec) ESE/SMPTE/EBU/ASCll Time Display 12 Inch - Red

ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Display - Wall Mount Enclosure Time Code Remote Display

ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier

ESE ES-103U Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code. 9 Yellow LED Digits .56 Inch

ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure

ESE ES-101 Low Cost GPS Master Clock / Time Code Generator w/ Option HR - Relay Contact Closure

ES 102U GPS Based Time Code Generator (Options K and 10ns)

ESE ES-104E-P-J GPS Based NTP Time Server with 19 Inch Front Panel Rackmount & 220 VAC/50 Hz Operation Option

ESE ES-185F GPS Master Clock / Time Code Generator

ESE ES-188J NTP Referenced Master Clock/Time Code Generator with 220 VAC/50 Hz Operation Option

ESE ES-372U Console Mount Time Code Slave Display

ESE ES-455SMPTE Time Code Reader / Video Inserter

ESE ES-455U SMPTE Time Code Reader and Video Inserter

ESE ES 466 SMPTE/EBU Presettable Up/Down Timer with Rack Mount Option

ESE ES-491VITC Time Code Reader

ES-736 4-Digit Stand Clock w/10 Outputs & 100 Programmable Events

ESE The ES-911/TSM Time Sync Machine Master Clock

ESE ES-166UE 6-digit 1 Inch Blue LED Time Code Reader In Desk Mount Enclosure w/ Options NTP-C - P & PoE

Sign In

Time Code Generators & Readers

Narrow Products

By Brand

By Price Range

Filter By