ADDERLink X-DVIPRO-MS2-US USB2.0 & Dual Head Single Link DVI KVMA CATx Extender - 164 feet/50 Meters

X-DVIPRO-MS2-US - Overview

• Features:

  • Perfect Digital Video, Real Time Control: The AdderLink X-DVI PRO MultiScreen extender uses an uncompressed system whereby every pixel of every frame is sent without loss. HDMI video and audio can be extended with the correct adapter cable, although HDCP and CEC are not supported.
  • 50 Meters Over a Single CATx Cable: Video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50 meters of extension. The second video head requires a separate CATx cable. Distance is dependent upon video resolution, the CATx cable type, and the number of connection breaks for patch panels and wall plates. See table on reverse for details.
  • USB 2.0: Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and mass storage devices. Full speed (12Mbps) isochronous devices such as headsets are supported.
  • Power Efficiency: The X-DVI PRO MS extender is designed to be highly power efficient and run with the minimum of input. In fact, the transmitter unit is so energy efficient that it can be powered solely from two host computer USB connections.
  • EDID Management: The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.
  • Plug and Play: The X-DVI PRO MS extenders are delivered in a zero-config state so you can plug them in and start working with them straight away. There's no need for drivers or software to be installed.
  • Analog Audio: Stereo CD quality (stereo channel 16 bit sampled at 44.1kHz) is available to transfer audio from local to remote for line out.
  • Digital Audio: Supports 8 channels of HDMI audio simultaneously with analog audio.
  • Built to Last: Adder Technology have a well-earned reputation for creating products that perform well and stay the course. The X-DVI PRO MS extender units are no exception and feature tough metallic enclosures to ensure they can easily withstand everyday treatment. The internal components and external connectors too are selected for their reliability in addition to their performance characteristics.
   

• Specifications:

  • Important extension distance details
    Recommended cables are CAT7 shielded foiled twisted pairs: Daetwyler 7702 Flexible patch cable Daetwyler 7120 Bulk cable Category 5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
  • Res (@60Hz): 1920 x 1200 Cable: CAT7 Patches: 0 Dist: 50m
  • Res (@60Hz): 1920 x 1200 Cable: CAT6a* Patches: 0 Dist: 50m
  • Res (@60Hz): 1680 x 1200 Cable: CAT5e* Patches: 0 Dist: 50m
  • Res (@60Hz): 1920 x 1200 Cable: CAT7 Patches: 2 Dist: 40m
  • *Shielded
    
    
  • Notes:
  • Distances are achieved using single lengths of trunk/ bulk cable. For each break/patch connection, reduce distance by 5m.
  • Preferably patch cables should be of type CAT7a and less than 2m.
  • Patch cables over 2m must be CAT7a.
  • CAT5e is not recommended for use with this system.
  • The maximum extension distance for USB is 164 feet/50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.
    
    
  • Hardware compatibility
  • All computers with DVI-D, USB and audio - requirement dependent.
    
    
  • DVI-D Interface - digital only
  • The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz per head. USB 2.0 Low and Full speed
    
    
  • USB 2.0 (Low and Full speed)
  • Transparent that supports HID and mass storage devices to a maximum of 50 meters. You may need to reduce maximum cable length by 5 meters if a USB hub is connected to the receiver unit.
    
    
  • Audio
  • The system delivers analog stereo audio (Line Out). 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).
    
    
  • Software compatibility
  • All known operating systems
    
    
  • Computer connections Transmitter (TX)
  • 2 x DVI-D, audio 3.5mm in, USB type B
    
    
  • Computer connections Receiver (RX)
  • 2 x DVI-D, audio 3.5mm out, USB type A x 4
    
    
  • Physical design
  • Dimensions (WxHxD): 4.7 x 3 x 2" (120 x 75 x 48mm)
  • Weight: 500g / 1.1 lb
  • Case: Compact
  • Material: Robust Metal Construction
    
    
  • Power:
  • Rx: 2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter
  • Tx: Powered from two USB connections
  • Optional: 2.5mm DC jack (power adapter not include)
    
    
  • Operating temperature:
  • 0° to 40°C / 32° to 104°F.
    
    
  • Approvals:
  • CE, FCC
   

• Item Includes:

  • 1 x DVIPRO MS2 local and remote modules
  • 2 x 12.5 W power supplies
  • 2 x Video cable DVI-D to DVI-D
  • 2 x USB cable 2m (a to B)
  • 2 x 3.5mm stereo audio cable
   

• Warranty:

  • 2 Year Limited
   

• GTIN:

  0818212180799