Apantac HDMI-SET-9 HDMI-IP-E Extender and HDMI-IP-R Receiver - Extends HDMI IR & RS232 to 330 feet (100 meters)

ITEM #: APA-HDMI-SET-9 MFG #: HDMI-SET-9

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the APA-HDMI-SET-9

HDMI-SET-9 - Overview

Apantac's new HDMI over IP Extender/Receiver set provides a versatile solution to send HDMI video sources to other source devices or remote screens, over a standard Gigabit Ethernet IP Network.

These HDMI extenders use industry standard H.264 streaming compression with UDP and multicast IP protocol. The output of the transmitter can be decoded and viewed with off-the-shelf, open source software such as VLC (Visible Light Communication platform).

This low-cost set includes an HDMI over IP extender for connecting to an HDMI source, and a receiver unit that connects to an HDMI display or other source. This set also supports the extension of infrared and RS232 over IP up to 100 meters at 1080P 60Hz.

This new set includes an integrated web server for easy system setup. The built-in HDMI loop through eliminates the need for a splitter.

  • Features:

    • HDMI Extender over Gigabit Ethernet network
    • Supports IR and RS-232 Extension
    • Supports up to 100 meters on 1080P@60Hz
    • Built-in HDMI loop through to eliminate the need for a splitter
    • Transports HDMI via H.264 Baseline profile up to 18Mbps + 48K/16bit 2chan192 Kbps MP3
    • Supports UDP IP protocol and Multicast (Other IP protocols available soon)
    • HDMI and HDCP compliant
    • Built-in Web server for system setup
    • Supports HDMI resolutions up to 1920x1200/1080P
     

  • Specifications:

    • INPUT: HDMI Female (HDMI-IP-E)
    • OUTPUT: HDMI Female (HDMI-IP-E and HDMI-IP-R)
    • LINK: 1x RJ45 (HDMI-IP-E and HDMI-IP-R)
    • IR2 IN: 1x 3.5 Mini Jack (HDMI-IP-R)
    • IR OUT: 1x 3.5 Mini Jack (HDMI-IP-E)
    • IR CARRIER FREQUENCY: 20 KHz ~ 60 KHz
    • BAUD RATE SETTINGS: 3 Pin DIP switch
    • ID DIP SWITCH: 8 Pin DIP switch
    • RS-232 CONNECTOR: DB9 Femaile x 1
    • MAXIMUM DISTANCE: 100 meters. Point to point @ 1080P
    • MAXIMUM RESOLUTION: 1080P60Hz
    • WEIGHT: 338 g
    • POWER: DC 12V 1200 mA
    • DIMENSIONS: 120x75x33 mm
     

  • Item Includes:

    • 1 x HDMI-IP-E (Encoder)
    • 1 x HDMI-IP-R (Decoder)
    • 2 x IR Emitter Cable
    • 2 x 12V DC Power supplies
    • 1 x Quick START Guide
     

  • Warranty:

    • 3 Years
     

Required Accessories

HDMI-SET-9 - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov