Pliant Technologies TMP-B409 Tempest 900MHz 4 channel BaseStation

ITEM #: COA-TMP-B409 MFG #: TMP-B409

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the COA-TMP-B409

TMP-B409 - Overview

The Pliant TMP-B409 Tempest900 BaseStation is a 4-channel Frequency Hopping Spread Spectrum (FHSS) digital wireless intercom system operating in the 902 to 928 MHz band ensuring comprehensive coverage and wide reach while offering high resistance to multi-path interference. The front panel LCD display provides real time status including battery monitoring of active BeltStations and easy access to the hardwire intercom settings and levels. Each BaseStation is capable of Call and Remote Mic Kill.

Performance:
The Tempest900 4-Channel BaseStation is supplied with a single omni-directional antenna (RP-TNC RF connector). On the rear is a RJ-45 connector for a (optional) remote transceiver. The Remote Transceiver allows the antenna functionality to be located up to 1500 ft. (450 m) away from the BaseStation over CAT 5/6 cable with no loss of RF signal. The CAT 5/6 cable also supplies power to the remote transceiver. An additional RJ-45 enables remote monitoring and
control of the entire wireless system over a Local Area Network (LAN) with the aid of the Tempest T-Desk software.

Versatility:
The Tempest900 4-Channel BaseStation connections include a 2-wire interface with M/F 3-pin XLR loop thru and one 4-wire RJ-45 port per channel. The 2-wire interface is compatible with Clear-Com, RTS, and
Telex intercom systems and includes an auto-null circuit.

Modes:
Three modes of operation are available within each Tempest BaseStation: Normal, Shared, and Split. This feature allows from five users to hundreds of users, depending on configuration.

Expandability:
Utilizing the Tempest system's TDMA technology and proprietary Accu-Sync synchronization, up to five Tempest900 BaseStations and 25 full-duplex wireless BeltStations (in Normal Mode) can be used simultaneously. By switching to Shared or Split Mode, an unlimited number of BeltStations can be registered to each BaseStation using shared resources.

iSelect Roaming:
The Tempest900 4-Channel BaseStations handle work zone transitions with iSelect On Command Roaming technology. Accessing iSelect through theTempest900 BeltStation LCD user interface allows a user to easily change his/her association with another BaseStation location in just a few seconds.

  • Features:

    • 900MHz license free operation
    • Frequency Hopping Spread Spectrum technology
    • Supports up to 5 full duplex BeltStations per Base
    • Three Modes of Operation: Normal, Shared, and Split
    • iSelect On Command Roaming
    • 4 communication channels (conversations)
    • Mixed 2-wire and 4-wire operation
    • Compatible with Clear-Com, RTS, AudioCom
    • Hardwired Mic Kill and Call compatible
    • Stage Announce output with relay closure
    • Remote Transceiver port for remote antennas
    • 5 individually assignable relay closures
    • LAN interface for remote monitoring and control
    • Either AC and/or DC (battery) operation
     
  • Specifications:

    • System Specifications
    • RF Frequency: 902 to 928 MHz
    • RF Scheme: FHSS with TDMA
    • Effective Radiated Power: 250mW using 2dBi antenna
    • Receiver Sensitivity: -100 dBm for 10-5 BER
    • Radio Certification: FCC Part 15, Canadian RSS-210, license free
    • Transmission Range: 1,000 ft. (304.8 m) under ideal conditions. 500 ft. to 900 ft. (152.4 m to 274.3 m) typical
    • Audio Dynamic Range: >94 dB
    • Audio Frequency Response: 300Hz-3.8KHz with proprietary audio voice shaping
    • System Latency: Less than 60 ms direct

      Basestation Specifications
    • Intercom Audio Channels: 4
    • Full Duplex BeltStations per BaseStation: 5
    • Shared BeltStations per Base: Unlimited
    • Number of Antenna Ports per BaseStation: 1
    • Antenna Connector Type: RP-TNC
    • Number of Synchronized BaseStations: 3-5
    • Maximum Range of BaseSync Cable: 3,000 ft. (914.4 m)
    • BaseStation/BeltStation Pairing: Via supplied Mini-jack/cable
    • Programming Port: USB
    • Stage Announce and GPO Closures: 6 relays via DA-15
    • 2-Wire Intercom Interface: 4 channels via XLR 3F with XLR 3M loop thru
    • 2-Wire Intercom Compatibility: Clear Com, RTS, and Balanced compatible
    • 4-Wire/Matrix Connection: 4 ports via RJ-45
    • Aux Input: 1/4" 3 conductor jack accepts -15.5 to +4 dB, balanced, transformer isolated
    • Aux Output: 1/4" 3 conductor jack nominal -12 to +8 dB, balanced, transformer isolated
    • Stage Announce Output: XLR 3M, nominal -12 to +8 dB, balanced, Transformer isolated
    • Headset Connector: 4-pin male XLR (front panel)
    • Microphone Type: Dynamic or Electret, auto-selected
    • LCD Display: 240 + 64 resolution, 32 level gray scale
    • Dimensions: 1 RU unit, H 1.75 in. + W 19.0 in. + D 12 in. (44.5 mm + 482.6 mm + 304.8 mm)
    • Weight: 10.5 lbs. (4.76 kg)
    • Power Input AC: 85-264 VAC at 50-60 Hertz, 15 Watts
    • DC: Battery 11-32 VDC, 12 Watts
    • Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity
     
  • Item Includes:

    • AC Power Cord
    • Antenna (x1)
    • USB Ato B Cable
    • USB A to Mini B Cable
    • 1/8" Stereo Mini to 1/8" Stereo Mini Cable
    • Sync Cable
    • Quick Start Guide
    • Safety Manual
    • Firmware Update Manual
    • CD that includes Firmware Update Manual and T-Desk
     
  • Warranty:

    • Two Year Parts and Labor
     

TMP-B409 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov