DPA FID88C00 d:fine Directional Headset - 120mm Single Ear - Brown

ITEM #: DPA-FID88C00 MFG #: FID88C00

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the DPA-FID88C00

FID88C00 - Overview

The d:fine 88 Directional Headset Microphone combines the legendary sound of the 4088 Directional Capsule with the lightweight and flexible d:fine Headset system. Staying true to the DPA legacy, d:fine offers accurate and natural voice intelligibility and very high-SPL capabilities – users can both speak and sing into the mic with no hint of distortion. Like all of the microphones in the range, the d:fine 88 Directional Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities. Users can both speak and sing into the mic with no hint of distortion. The microphone capsule is also optimized for low distortion as well as humidity resistance. The d:fine 88 Directional Headset Microphone is available with single- or dual-ear mounts. Single-ear mount variants are the quickest to put on and often the best choice when miking needs to be fast and easy. Dual-ear mount variants sit more securely around the head and are ideal for active performance situations. Available in black, beige and brown, the d:fine 88 Directional Headset Microphone has been ergonomically designed to fit comfortably and easily around the head. This mic adjusts to fit any ear size and head shape while at the same time it mounts securely and is hardly visible. By rotating the boom and the ear hook, the microphone can be easily used on either the left or right ear.

  • Features:

    • Pristine audio quality
    • Lightweight and flexible
    • Easy mounting to both the left and right
    • Minimal visual impact
    • Resistant to humidity
    • Modular adapter system fits most professional wireless systems
     
  • Specifications:

    • Directional pattern: Cardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz - 20 kHz
    • Frequency range, ±2 dB, Near field 0.8 - 1.2 in: 100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
    • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
    • Total harmonic distortion (THD): < 1% up to 123 dB SPL peak
    • Dynamic range: Typ. 97 dB
    • Max. SPL, peak before clipping: 144 dB
    • Output impedance: From MicroDot: 30 - 40 ω. From DAD6001: 100 ω
    • Cable drive capability: Up to 984 ft with DAD6001-BC XLR Adapter
    • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
    • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
    • Power supply (for full performance): Minimum 5 V to maximum 50 V through DPA adapter for wireless systems
    • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
    • Connector: MicroDot
    • Color: Black, beige or brown
    • Weight: Single Ear - 0.35 oz
    • Microphone diameter: 0.21 in
    • Microphone length: 0.5 in
    • Cable length: 4.1 ft
    • Cable color: Black, beige or brown
    • Cable diameter: 0.06 in
    • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
    • Temperature range: -40°F to 113°F
    • Relative humidity (RH): Up to 90%
     

FID88C00 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov