DPA VO4099D d:vote4099 Instrument Mic Kit Supercardioid Drum

ITEM #: DPA-VO4099D MFG #: VO4099D

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the DPA-VO4099D

VO4099D - Overview

The 4099D is a microphone solution that allows for high quality audio capture of drums and percussion instruments. The low profile and unobtrusive design provides visual elegance along with uncompromised sound quality and accurate dynamics.

  • Features:

    • Superior gain-before-feedback
    • Natural sound – easy to blend with pick-up
    • Flexible and easy mounting
    • Mount has no impact on acoustic sound
    • Detachable cable and versatile gooseneck extender
     

  • Specifications:

    • Directional characteristics: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz to 20 kHz
    • Frequency range, &plusmm; 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
    • Sensitivity, nominal &plusmm; 3 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 ?Pa (max. 31 dB(A))
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 66 dB(A)
    • Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
    • Dynamic range: 95 dB
    • Max. SPL, peak before clipping: 152 dB
    • Output impedance: From MicroDot: 30 to 40 ohm; from DAD6001: 100 ohm
    • Cable drive capability: Up to 300 m (984 ft) with DAD6001 XLR adapter
    • Output balance principle: Signal balanced with DAD6001 XLR adapter
    • Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter
    • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001 XLR adapter
    • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR adapter
    • Connector: MicroDot
    • Color: Black
    • Capsule diameter: 5.4 mm (0.2 in)
    • Microphone length: 45 mm (1.8 in)
    • Cable length: 1.8 m (6 ft)
    • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
    • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
    • Relative Humidity (RH): Up to 90%
    • Gooseneck length: 140 mm (5.5 in)
     

  • Item Includes:

    • Supercardioid d:vote 4099 Microphone
    • d:vote Drum mount
    • Heavy Duty MicroDot Cable
    • MicroDot to XLR Adapter
     

Required Accessories

VO4099D - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov