Earthworks FMR500/HC 19-Inch Hypercardioid Podium Mic with Rigid Center - 20Hz - 20kHz

ITEM #: ETW-FMR500-HC MFG #: FMR500/HC

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ETW-FMR500-HC

FMR500/HC - Overview

The Earthworks FMR500/HC FlexMic™ Series podium microphones are designed for permanent installation in podiums and other surfaces for speech applications.

Performance
Whether it is a seasoned professional or a public speaking novice stepping up to the microphone, the FlexMic™ has you covered. Optimized for speech, the FlexMic™ microphones feature a frequency response out to 20kHz and excellent phase response that delivers the highest level of speech intelligibility and articulation.

The near-perfect polar response of the FlexMics provides incredible coverage and freedom of movement for the speaker. Whether speaking above, below or to either side of the microphone, every word will be reproduced with incredible clarity and intelligibility up to 90 degrees off-axis. This wider coverage also means that a single Earthworks microphones can be used to properly cover more than one speaker.

With 32dB or rear rejection, the FlexMic™ delivers more gain before feedback and exceptional isolation from unwanted sound sources.

Ideal for civic, corporate, court, government or worship spaces.

Construction
The FlexMic™ microphones feature a slim yet sturdy 7mm gooseneck that stays put when adjusted, while providing low profile sightlines. The gooseneck utilizes the latest in flex materials to virtually eliminate handling and movement noise.

A metal mesh windscreen coupled with layers of foam prevent the loud pop inducing bursts of stop consonants from reaching the microphone. For outdoor events, an additional foam windscreen accessory (FMW2) is available to help eliminate noise from high mph winds. Optional PMM1 permanent mount accessory available separately.

  • Features:

    • Uniform frequency response on or off axis
    • Flat from 50Hz to 20kHz within + 2dB at 6 inches
    • Will handle up to 145dB SPL
    • No handling noise
    • High rejection of sounds to the rear of the microphone
    • Rejects RFI
    • They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
    • Incredible gain before feedback
    • Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
    • Available in cardioid and hypercardioid models
     
  • Specifications:

    • Frequency Response: 20Hz - 20kHz
    • Polar Pattern: Cardioid or Hypercardioid
    • Sensitivity: 20mV/Pa (-34dBV/Pa)
    • Power Requirements: 24-48V Phantom, 10mA
    • Max Acoustic Input: 139dB SPL
    • Output: XLR-3 (pin 2+)
    • Output Impedance: 65 Ohms, balanced (Between pin 2 & 3)
    • Min Output Load: 600 Ohms between pins 2 & 3
    • Noise: 16dB SPL equivalent (A weighted)
    • Dimensions L x D: 720mm x 22mm (27 x .860 inches)
    • Weight: .25 lb. (25g)
     
  • Item Includes:

    • FMW1 - Metal Mesh Windscreen
    • PMM1 - Podium Mount for FlexMics (all models)
     
  • Warranty:

    • 15 Years
     
  • GTIN:

    0827517000923
     

FMR500/HC - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov