The LYNX Technik RFR 1000 is a compact 1 RU high 19" mounting frame designed for yellobriks. Up to 14 yellobriks can be vertically mounted and are mechanically clamped securely in place. Each slot has its own integrated power connector on a central power bus.
The rack has two external 12VDC inputs for power, one for primary power, the second for redundant backup. An optional external power brick is available (RPS 1120 US) which provides enough power for any combination of yellobriks. A second unit can be used for redundant backup.
Primary and redundant power LED’s are located in the front panel as well as GPO connections for the power supply failure alarms.
While the frame will accommodate all yellobriks, it is ideally suited for the yellobrik fiber converters, which are typically used in larger numbers. Fiber connections are on the front and the SDI copper connection in the rear. A space is left open on one side to route the fiber loops from front to rear making for a very clean installation. The module fiber RX and TX activity LED’s can be seen clearly from the front with the modules installed.
With the smaller fiber modules installed the system only occupies 1RU or rack space, with the taller utility modules the system will need a little over 2RU of rack space. Small and large yellobriks can be mixed in the same chassis if needed.
Note. No AC Power supply is included (As some users supply their own 12VDC power) please order the RPS 1000 power supply separately, order 2 for redundant power protection.
RPS 1120 US - Central Power Supply (order 2 for redundant protection)