Motu UltraLite-mk3 Hybrid FireWire / USB2 Audio Interface with On-Board Effects

MOTU MK3 ULTRALITE HYBRID - Overview

• Features:

  • Hybrid FireWire/USB2 connectivity -- connect to your computer via either bus-powered FireWire or hi-speed USB2.
  • CueMix FX -- flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
  • 10 inputs / 14 outputs -- there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
  • Classic Reverb -- provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
  • Two forms of compression -- a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
  • Modeled EQ -- provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
  • CueMix FX cross-platform mixing software -- attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
  • Front-panel control -- access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
  • "Reverb return" stream -- allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
  • Stand-alone operation -- program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig -- no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
  • Multiple CueMix FX mixes -- for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear -- with no latency.
  • Two combo jacks provide hi-Z 1/4" guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
  • Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
  • Precision Digital Trim -- Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
  • Direct Digital Synthesis (DDS) -- a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
  • Time code support -- directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
  • Sample-accurate MIDI -- connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
  • And a Whole Lot More!!!!!!
   

• GTIN:

  0839128005747