The Chief sectional wall racks have been re-designed with ease of installation, security and structural integrity in mind. The SWR series is a fully welded enclosure. The back pan is reinforced at the hanging points to minimize the possibility of tear-out. Welded stiles and rails eliminate cabinet distortion while an extended bottom lip provides support for the center section during installation and use. The center section pivots on alloy steel socket pins, that thread into weld nuts on the cabinet. These pins aid during installation making it possible for one person to install the rack with just the use of a hex key. The rack is equipped with fully adjustable, 11 gauge rack rail, ventilated sides, and a variety of conduit knockouts in the top and bottom. Further, there are abundant tie off points throughout the rack. Keyed locks are standard between the rear and center sections and between the center and the optional front door. The SWR can be set up so that both the center section and door can swing left or right. For additional security a locking security rod can be added as an option. The rack is finished in durable black powder coat.