Ward-Beck AA6201A plus RM openGear Universal 1x8/ Dual 1x4 Analog Audio Distribution Amplifier with T6303A Rear Module

ITEM #: WARD-AA6201A-RM MFG #: AA6201ARM

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the WARD-AA6201A-RM

AA6201ARM - Overview

AA6201A+RM is a combination package comprising an AA6201A audio distribution amplifier and a T6303A rear termination module. This combination allows the AA6201A to be used as a 1 x 8 distribution amplifier or a dual 1 x 4 distribution amplifier

The AA6201A is an analog audio distribution amplifier housed in openGear series frames. It can be used as a mono or two channel (stereo) audio DA. As a mono DA it can provide eight copies of the single (mono) input signal. As a two channel (stereo) DA it can provide four copies of the stereo inputs. For maximum output capability the T6303A rear termination modules are used.

  • Features:

    • Analog audio distribution amplifier
    • used as either a mono or two channel (stereo) audio DA. Mono DA provides eight copies of the single (mono) input ,
    • stereo mode provides four copies of the two (stereo) inputs.
    • Maximum output capability requires T6303A rear assemblies
    • . High density installations can use the T6403A rear assembly to provide up to 20 1 x 4 mono audio DAs in the OG3-FR-C frame. Ultra high stereo capacity can use the T6406 rear assembly to provide two 1 x 3 stereo audio DAs per slot
    • can be addressed through Dashboard to report card status.
     
  • Specifications:

    • Input
    • Maximum Input Level - +26 dBu
    • Input Impedance - Greater then 20K Ohm balanced
    • CMMR - Greater than 70dB, 20Hz to 20kHz 
    • Output
    • Maximum Output Level - +26 dBu
    • Output Impedance - 60 Ohm balanced
    • Output Isolation - Greater than 60dB
    • Performance
    • Harmonic Distortion - Less than 0.01%
    • Frequency Response - Ý 0.1dB from 20Hz to 20kHz
    • Gain - -14dB to +18dB continuously variable
    • Noise - Better than 95 dBu, 20Hz to 20kHz at unity gain
    • General
    • Dimensions 3.025" high x 12.800" deep
    • Power requirement’s +12 V@ 215 mA
    • Weight approx.0.115 kg (0.252 lbs)
     
  • Item Includes:

    • AA6201A
    • T6303A
    • Mounting Screw
    • 10 three pin male plugs
     

AA6201ARM - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov