The Zicro Micro is used to mount any device with a 1/4" 20 or a 3/8"16 (with a 3/8 16 to 1/4" 20 Screw Adapter) screw hole. The Zicro Micro is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, or an articulating arm or Zud. (A Zud is a short rod with either a 1/4" 20 or 3/8 16 screw or screw hole on one end.) The 1/4" 20 screw has an adjustable position to hold any accessory. This mount is less than half an inch thick. The lever is the new Mini Ratcheting Lever, which works in the same manner as the Ratcheting Lever, but with a smaller footprint allowing the mount to be used in tight spaces. The Zicro Micro also has L shaped claws to prevent a monitor from turning and unwinding. These claws can be moved or removed altogether to accommodate any situation.