Where to Buy Audio Hum Eliminators | Sescom IL-19

Viewing Item(s):

Display

Show As

RDL AV-HK1 HUM KILLER Stereo Audio Isolation Transformer
Radio Design Labs
Item# AV-HK1
The AV‑HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold‑plated phono jacks. The AV‑HK1 is supplied with two adapter cables to facilitate connecting with products that use mini‑plugs and jacks. The shield connection of each INPUT jack is electrically isolated from the case and from the output ground. The shield connection of each OUTPUT jack is connected to the case shield....
Our Price: $128.11
Availability: In Stock
Add to Wish List
RDL AV-HK1X HUM KILLER Audio Isolation Transformer XLR Input/Output
Radio Design Labs
Item# AV-HK1X
The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load. Input and output connections are provided on XLR jacks with gold-plated contacts. The shield (pin 1) connection of the INPUT jack is electrically isolated from the case and from the output ground (pin 1) at audio frequencies. The ground (pin 1) connection of the OUTPUT jack is connected to the case shield. The user audio source, such as a mixer, preamplifier...
Our Price: $139.37
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom IL-19 Pro Audio Hum Eliminator Inline with Isolation
Sescom
Item# IL-19
You run the wires, make the XLR connections and power up your sound system only to find it's not music to your ears. One of the most dreaded sounds is prevalent across your system - speaker hum and noise. This isn't 1970 but an age old problem can still prevail in today's PA systems and that's why the Sescom IL-19 hum eliminator has stood the test of time. Its clever design isolates ground loop noise to remove that annoying buzz in your speakers. The Industry Standard - Designed as 3 products...
Our Price: $50.49
Availability: In Stock
Add to Wish List
Jensen CI-2RR IsoMax Stereo Audio Isolator & Hum Eliminator
Jensen Transformers
Item# JEN-CI2RR
The Jensen Iso Max CI-2RR is a passive two channel RCA audio ground isolator designed to eliminate hum and buzz caused by ground loops in the most demanding audio systems. Eliminates hum and buzz caused by ground loops. The unbalanced stereo design begins with gold RCA connectors to ensure optimal signal transfer. These are housed in a rugged steel enclosure that is fitted with screw-down flanges for easy installation in racks, under shelves or attached to cabinetry. The magic...
Our Price: $239.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Allen Avionics HD-SDI-3R 3 Channel Ground Loop BNC Hum Eliminator for High Definition Broadcasting - Rack Mounted
Allen Avionics
Item# AAV-HD-SDI-3R
A 3 channel ground loop eliminator for High Definition Broadcasting High frequency ground loop eliminator designed for use with High Definition Broadcast chains. The Allen Avionics HD-SDI-3R ground loop eliminators can be used for signal transmissions at 1.485Gbps over a cable contain a range of low to high frequencies. The HD-SDI Ground Loop Eliminator supports the four transmission rates of SMPTE 259m and SMPTE 292m 1.485Gbps HD SDI. Specifications: Number of inputs:...
Our Price: $689.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
RDL TS-1D Transient Suppressor
Radio Design Labs
Item# TS-1
The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines. Features: Immunity from Electrostatic Discharge Immunity from Induced Transient Voltage Immunity from RF Interference Immunity from Electromagnetic Pulse CE Compliance
Our Price: $152.41
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Jensen CI-2MINI Iso-Max PC Audio Ground Isolator
Jensen Transformers
Item# JEN-CI2MINI
When used in unbalanced audio consumer interfaces, this isolator not only eliminates hum and buzz but also enhances audio quality by reducing "spectral contamination" due to ultrasonic and RF interference. To avoid excessive high frequency losses, no more than 3 feet of cable should be used on its outputs. Features: Eliminates the inherent ground noise coupling mechanism Common-mode ground noise rejection of 95 dB at 60 Hz Wide bandwidth: !3 dB at 0.25 Hz and 50 kHz Handles signals up to 7 volts...
Our Price: $239.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Morley MHE 2-Channel Stereo Hum Eliminator Box
MORLEY
Item# MHE
The Morley MHE Hum Eliminator™ uses custom in-house made Isolation Transformers to break loop antennas that cause ground hum and buzz. The Hum Eliminator™ also converts back and forth between balanced and unbalanced connections and prevents the cable to act as an antenna for noise. Simply place a channel of the Hum Eliminator™ on the cable connections between the two offending pieces of equipment. Hum Eliminator™ will not affect the quality of the audio, it will...
Our Price: $109.00
Availability: In Stock
Add to Wish List
Jensen JT-MB-C Microphone Bridging Transformer with Dual Faraday Shields for High Isolation
Jensen Transformers
Item# JT-MB-C
The Jensen JT-MB-C is a microphone bridging transformer with dual faraday shields for high isolation. This transformer is designed to be driven from a 150Ω microphone source and loaded by the typical 1kΩ input impedance of microphone preamplifiers. It can be used with balanced or unbalanced sources and/or loads since both primary and secondary are fully balanced. A 30 dB magnetic shield package is standard. Features: Provides additional, isolated balanced output as...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom IL-19-MINI Hum Eliminator 3.5mm Stereo Mini I/O
Sescom
Item# IL-19-MINI
The next generation of the Sescom IL-19 series, the IL-19-MINI is an inline hum elimnator / matching transformer for 3.5mm stereo (TRS) runs and is perfect for both DSLR audio applications as well as a laptop interface where HUM always poses a problem, you can connect up to a 25 foot unbalanced 3.5mm TRS cable between any mic output source and through the IL-19-MINI to remove hum. As a laptop interface use it between external PC mic inputs to remove any unwanted hum and noise. Perfect for...
Our Price: $63.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Audio Hum & Noise Eliminators

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

RDL AV-HK1 HUM KILLER Stereo Audio Isolation Transformer

RDL AV-HK1X HUM KILLER Audio Isolation Transformer XLR Input/Output

Sescom IL-19 Pro Audio Hum Eliminator Inline with Isolation

Jensen CI-2RR IsoMax Stereo Audio Isolator & Hum Eliminator

Allen Avionics HD-SDI-3R 3 Channel Ground Loop BNC Hum Eliminator for High Definition Broadcasting - Rack Mounted

RDL TS-1D Transient Suppressor

Jensen CI-2MINI Iso-Max PC Audio Ground Isolator

Morley MHE 2-Channel Stereo Hum Eliminator Box

Jensen JT-MB-C Microphone Bridging Transformer with Dual Faraday Shields for High Isolation

Sescom IL-19-MINI Hum Eliminator 3.5mm Stereo Mini I/O

Sign In

Audio Hum & Noise Eliminators

Narrow Products

By Brand

By Price Range

Filter By