Where to Buy Countdown Clock Digital

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Brainstorm DXD-16 PTP Grandmaster Universal Clock with Precision Reference Generator
Brainstorm Electronics
Item# BRAIN-DXD-16
DXD-16 Universal GPS-capable Clock combines PTP and legacy Sync to keep traditional Audio/ Video equipment and the IP network in perfect sync, making the DXD truly Universal. IEEE 1588 Network Sync The PTP module supports PTP v2, PTP v1 (Dante) and gPTP (AVB). The DXD-16 can be either a PTP Grandmaster, slave or Boundary Clock. Precision Time Protocol (PTP) has been broadly adopted as the network synchronizing standard, which means that the DXD-16 can work in a number of...
Our Price: $8,795.00
Availability: In Stock
Add to Wish List
Plura SPT Studio Production Timer - Tabletop Housing
Plura Broadcast, Inc.
Item# PLUR-SPT
The Plura SPT combines the flexibility of a portable remote with the feature set of a large timer generator system. Up to six timers can be generated onboard. An external NTP server can be aligned as a real-time reference. An Ethernet output distributes all timers straight into your network. All A+V Ethernet displays can be hooked up at any place in the connected studio, so that all production timers finally become visible where they're needed and when they're needed...
Our Price: $4,836.60
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Brainstorm DXD/GPS GNSS/GPS Receiver for DXD Series - Easy to Install Add-On Card - Antenna Not Included
Brainstorm Electronics
Item# BRAIN-DXD-GPS
The DXD/GPS is a DPS reciever that can be be installed into the DXD-8 and the DXD-16. GPS not only provides an extremely accurate timing source, it also enables DXD's in remote locations to be locked and in phase with one another. Additionally, with the GPS option, the DXD will have a higher priority as a PTP Grandmaster.
Our Price: $1,425.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-996U 2.3 6 Digit Serial Slave
ESE
Item# ES 996U
The ES-996U is a Time Code display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts, via the rear-mounted terminal block (BNC connector on rack-panel units), either ESE Time Code™ (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-996U will automatically determine...
Our Price: $650.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX 5112U-NTP-C/PoE Self-Setting 12 Inch Analog Clock with NTP-C/PoE Option
ESE
Item# ESE-LX5112UNTPCP
The LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time Code. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact...
Our Price: $588.87
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Red LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Black 19 Inch Faceplate
ESE
Item# ESE-ES993UPBK-RD
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) Red LED displays. The unit is housed in a Black Anodized Front Panel. The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted...
Our Price: $663.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Brainstorm DXD/OCXO Optional Oven-Controlled Crystal Oscillator for the DXD Series Universal Clock
Brainstorm Electronics
Item# BRAIN-DXD-OCXO
The Brainstorm DXD/OCXO is an optional Oven-Controlled Crystal Oscillator for the DXD series. It achieves a very high frequency stability providing greater long-term time and TOD accuracy (+/-10ppb, equivalent to less than +/-10 frames per year). The DXD/OCXO is particularly recommended when using GPS as the greater stability of the OCXO will minimize drift during long dropouts. After installing the OCXO, no special setting is required. The DXD will automatically use the OCXO as the Internal...
Our Price: $545.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-362UE/N/P 100 Minute Master Up/Down Timer with N and P options
ESE
Item# ESE-ES-362UE-N-P
The ESE ES-362UE is a 100 Minute Up/Down Timer. It is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely control...
Our Price: $489.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-991UE Digital Time Code Remote Display with Black Anodized Aluminum & Plastic Case
ESE
Item# ES 991U
4 Versions Available
The ESE ES-991UE is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date...
Read More
Our Price: $450.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UEP 60 Minute Up Timer with 19 Inch Front Panel Rack Mount Option
ESE
Item# ESE-ES-520UEP
The ES-520UE is a 60 Minute Up Timer with 19 inch front panel rack mount. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE...
Our Price: $240.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-126U Time and Date Remote Display
ESE
Item# ES 126U
The ES-126U/ES-127U are Time Code displays featuring .56" high (ES-126U) or 1" high (ES-127U) yellow LED displays. Both Time and Date are displayed. The units are housed in a rack mount panel & chassis assembly. The ES-126U is one rack unit high (1.75") while the ES-127U measures two rack units high (3.5"). The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may...
Our Price: $551.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 194U Desk Top Master Clock With HR Option
ESE
Item# ES 194U-HR
Designed as an economical alternative to the more "sophisticated" Master Clock, the ES-194UE has proven its value time and time again. This unit feature a .56" six-digit yellow LED display and an ESE Serial Time Code output (capable of driving up to 100 Slaves at a distance of up to 4000 feet). Accessible on the rear mounted 9-pin D-sub connector are a 1 PPS Output, remote access to the two setting controls (Set and Select) and an External Sync Input (capable of synchronizing the unit with an external...
Our Price: $304.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
12 Hour 7/16 High Red Digit Real Time Clock
ESE
Item# ES-172U
2 Colors Available
The ES 172U (12 hour) and ES 174A (24 hour) are 6-digit clocks with .4" high bright red LED displays and are designed for console mount applications. Fast, Slow & Hold controls are accessible on the rear mounted connector. Front mounted switches are optional.
Read More
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-302U 100 Minute Up/Down Timer
ESE
Item# ES-302U
The ES-302U is a 100 Minute Up/Down Timer. The timer is presetable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. If the relay contact closure option is ordered, the contacts are accessible on a rear-mounted DB-9 connector. Options List (10nS) 10nS Accuracy: The accuracy of the unit is improved to 10nS. List: $300 (Black)Black Anodized Front...
Our Price: $399.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 391U 2.3 Inch 100 Minute Up/Down Timer with Options ESE & RED
ESE
Item# ES-391U-ESE-RED
The ES-391U is a 100 Minute Up / Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 2.3" Red LED Display 100 Minute Up / Down count range (00:00 - 99:59) Thumbwheel Time Preset Up, Down, Stop, Reset & Preset functions Remote Control Input / Control Plate ESE Time Code Output: An ESE Time Code output is provided allowing the unit...
Our Price: $669.75
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-570 60 Minute Up Timer
ESE
Item# ES-570
The ES-570 is a 60 Minute Up Timer in a black plastic console-mount case. Start, Stop and Reset control inputs are provided on the rear connector (a momentary closure to Ground is all that is required to activate a function). Front-panel control switches are available as an option. Features: Console Mount Enclosure .4" Red LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input (optional Front Panel switches) 220-240 VAC (110-120...
Our Price: $199.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-124U 24 Hour Digital Clock
ESE
Item# ESE-ES-124U
The ES-124U is a low-cost clock for applications not requiring GPS or temperature controlled stability. The ES-124U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. a "Set/Select" toggle switch for setting is accessible on the rear of the case. Features: .55" Yellow LED Display 12 hour (ES-112U) or 24 hour (ES-124U) display Date Function Optional Rackmount 220-240 VAC (110-120 VAC is standard) & UL options available Various...
Our Price: $218.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 124UE Standalone 24HR Desk Clock
ESE
Item# ESE-ES-124UE
The ES-112UE (12 hour)/ES-124UE (24 hour) is a low-cost clock for applications not requiring GPS or temperature controlled stability. The ES-112UE/124UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. a "Set/Select" toggle switch for setting is accessible on the rear of the case. Features: .56" Yellow LED Display 12 hour (ES-112UE) or 24 hour (ES-124UE) display Date Function Optional Rackmount 220-240 VAC (110-120 VAC is standard)...
Our Price: $217.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-161UJ .55 Desk Top Serial Slave 220 Volt
ESE
Item# ESE-ES-161UJ
The ES-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0" "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $252.29
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 185E plus ANT GPS Master Clock 1 3/4 Inch Rack Mount Antenna Option - Black
ESE
Item# ESE-ES-185EBKANT
The ESE ES-185E is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and supplies this data to the user in a variety of forms. A 12-channel receiver is employed that is capable of tracking up to twelve satellites simultaneously, although reception of only one is required for time data to be output. ESE's ES-185E offers an accuracy of better than 10nS, and is entirely self-setting. The dual battery...
Our Price: $2,649.69
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 362U P X 100 Minute Master Timer with 19in. Front Panel and Three Relay outputs
ESE
Item# ESE-ES-362U-PX
The ES-362U from ESE is a 100 Minute Up/Down Timer. The ES-362U is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides...
Our Price: $552.29
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UE/D/P DB9 .56-Inch Yellow LED/60 Min Up Timer (Min & Sec) - 19 Inch Rack Option with 6 Foot Cable
ESE
Item# ESE-ES-520UE-D-P
ESE ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. This model includes the following options: D - Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. P - 19" Front Panel (Rack Mount): Designed for mounting...
Our Price: $265.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UT 60 Minute Master Timer with Tenth of a Second Option
ESE
Item# ESE-ES-520UT
The ESE ES-520UT is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE Timer Code™ output Optional...
Our Price: $223.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-991U/PoE 2.3 Inch 4-Digit Serial Slave Time Code Display - Min and Sec - ESE/SMPTE/EBU/ASCII - Amber Led
ESE
Item# ESE-ES-991U-POE
The ESE ES-991U is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $485.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-991U/PoE/Red 2.3 Inch 4-Digit Serial Slave Time Code Display - Min and Sec - ESE/SMPTE/EBU/ASCII - Red Led
ESE
Item# ESE-ES-991UPOE-R
The ESE ES-991U is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead...
Our Price: $485.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-104E/ES-104E/P2 Two ES-104E NTP Time Server Side by Side in a 19-Inch Rack Mount
ESE
Item# ESE-ES104EES104E
ESE ES-104E/ES-104E/P2 is 2 ES-104s Side by Side in a 19-Inch Rack Mount(P2 option) - Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel. The ES-104E provides a practical method of putting accurate time information onto a network. The unit receives GPS time using the supplied antenna. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-104E is housed in a rugged black anodized desktop enclosure. A voltage-controlled...
Our Price: $2,900.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 126U-BLUE .55 Inch 12-Digit ESE/SMPTE/EBU/ASCII Serial Slave With Blue LED Display
ESE
Item# ESE-ES126U-BLUE
The "Digital Revolution" has been a part of every day life for more than a quarter century. And since its beginning, ESE has been there... supplying precision time keeping products for a myriad of applications and to most every industry. ESE equipment has flown on board the space shuttle and on a more mundane level, timed the speakers at the local city council meeting. Since 1971, the Broadcast Industry has referred to ESE as the "Clock and Timer People". As the Digital Revolution continues...
Our Price: $589.47
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure with Wall Option
ESE
Item# ESE-ES166UE-WALL
The ESE ES-166UE-WALL is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0" "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12-...
Our Price: $391.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure with Option P & Clear
ESE
Item# ESE-ES166UEPCLR
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24...
Our Price: $409.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 192UE Master Clock Line Frequency Referenced (6-Digit 12 Hour) - Desktop with Option P - 19 Inch Rack Mount
ESE
Item# ESE-ES192UE-P
The ESE ES-192UE (12 hour) is a low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the LX-192UE, the ES-192UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time & Date data are output to Slave displays via the TC90™ Time Code output. This Unit comes with Option "p" which includes the 1.75" Rackmount enclosure. Features: .56" Yellow LED Display 12 hour (ES-192UE) or...
Our Price: $308.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 590U/D-RED 60 Minute Up Timer with Remote Control via 6 ft Cable/ Connector/ Switch Plate. Red LED Display
ESE
Item# ESE-ES590UD-RED
The "Digital Revolution" has been a part of every day life for more than a quarter century. And since its beginning, ESE has been there... supplying precision time keeping products for a myriad of applications and to most every industry. ESE equipment has flown on board the space shuttle and on a more mundane level, timed the speakers at the local city council meeting. Since 1971, the Broadcast Industry has referred to ESE as the "Clock and Timer People". As the Digital Revolution continues...
Our Price: $489.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX 5212U Digital/Analog 12-Inch Clock with NTP-C/PoE with ESE/SMPTE/EBU & ASCII Input/Amber LED(9)
ESE
Item# ESE-X5212UNTPCPO
The ESE LX-5212U/NTP6-C is a 12" Digital and Analog Clock. The unit is designed to read and display time as received from an NTP server via an Ethernet connection. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments, stay lit continuously and serve as reference indicators. Three Brightness controls allow the intensity of the three "sets"...
Our Price: $905.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Interspace Industries 5PINCOMMS 5 Pin Comms Loop Through Cable - Green Sleeve
Interspace Industries LLC
Item# INTI-5PINCOMMS
5 Pin comms loop through cable (Green Sleeve) Features: Specifications:
Our Price: $103.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries AERI Univ. Aerial BNC Mount - 90 Degree Angle Adjustment
Interspace Industries LLC
Item# INTI-AERI
Universal Aerial BNC mount with 90deg angle adjustment Features: Specifications:
Our Price: $40.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Interspace Industries CDD1 Standard 25mm Remote Displays for CDU CDSOFT & CW
Interspace Industries LLC
Item# INTI-CDD1
CountDown2 25mm Remote Displays Additional 25mm remote displays for CountDown2 Features: Specifications:
Our Price: $429.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDV Timing to Video Output - Connect to a CDTouch or Filibuster and Display the Time on a Monitor
Interspace Industries LLC
Item# INTI-CDV
Interspace Industries CDV is a timing to video system allowing the timing signal from the CDTouch (via XLR) to output to an HMDI video signal. CDV is powered from the CDTouch (Controller). Interspace Industries CDV - CountDown Video is exactly what it says. CDV uses a common small board micro-computer, the Raspberry Pi, to do the hard work of a HDMI driver. Along with some very clever software and some hardware, the CDV provides a solution to convert the output from a CD Touch...
Our Price: $312.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries FiliBuster Up Timer Main Controller and Power Lead
Interspace Industries LLC
Item# INTI-FILIBUSTER
FiliBuster has been based on the ClockWatch, to provide a simple yet effective timing solution for public meetings and debates, where a clear visual display of elapsed time is required. Designed for use with the Combi-Tower (but not exclusively) this system will give everyone a good clear signal of when to begin and cease talking. The unit is AC Mains powered, and has 2 XLR connectors for the Big, Standard and Mini numeric displays as well as the Combi-Lamp and Combi-Tower, to give a tailored...
Our Price: $1,012.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-520U 60 Minute Master Up Timer
ESE
Item# LX-520U
The LX-520U is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on a rear-mounted DB-9 connector. A rear-mounted BNC connector provides ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display Ruggedized Baked Powdercoat Aluminum case 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-5212U Digital/Analog 12-Inch Clock - SMPTE/EBU & ASCII Input - Amber LED with NTP6-C/PoE Options
ESE
Item# LX5212U-NTP6CPOE
The ESE LX 5212U NTP6-C/POE is a 12" Digital and Analog Clock with with the NTP6-C/PoE Options factory installed. The unit is designed to read and display time as received from most any source of time code. Alternatively, the clock may be manually set and operated in stand-alone mode. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments,...
Our Price: $849.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES161UE/NTP-C/UL NTP Time Display with UL Approved Power Supply
ESE
Item# ES-161UENTP-C-UL
The ES-161UE/NTP-Cis an NTP Time Display featuring .56" high Yellow LED displays. The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. With additional options, the ES-161UE/NTP-C can function as a Time Code Converter. If Option RS is ordered, an RS-232C or RS-422A/RS-485 ASCII output is provided....
Our Price: $315.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Interspace Industries CDSOFT Countdown System with Software & USB Hardware
Interspace Industries LLC
Item# INTI-CDSOFT
Soft CountDown is a clever piece of software that allows for all the functions of our Countdown2 system to be set up and seen on a computer screen, it is easy to use and is operated with a normal keyboard and mouse. When you purchase this system you will receive the Soft CountDown Expander dongle. This has two roles; 1.Protection of software from piracy and therefore, protection of your investment. Only needs to be plugged into the PC on its USB cable to enable the software. 2.If the Expander...
Our Price: $639.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDD3i 75mm Remote Displays for CDU CDSOFT & CW
Interspace Industries LLC
Item# INTI-CDD3I
Three inch display for CountDown2. Ideal for large conference venues where presenters need discrete but clear signalling of time remaining. Digits change colour according to the timer profile programming. Features: Specifications:
Our Price: $689.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDSPLIT Active 1x4 Splitter CDU CDSOFT & CW (Digits Only)
Interspace Industries LLC
Item# INTI-CDSPLIT
More Displays, Greater Distance. CD Splitter is a buffer box for our own CountDown systems. This has a single input and four outputs, use this unit to operate four (or more) displays, all driven from one output of the CountDown systems (CD2 and Soft CD). Features: Specifications:
Our Price: $513.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 962UP 2.3 Inch 12 Hour Digital Clock with P Option - includes 19 Inch Front Panel Rackmount
ESE
Item# ESE-ES962UP
The ESE ES-962UP (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-962U/964U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). The P Option includes 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is...
Our Price: $659.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-942CW Stand-Alone Clock (HR-Min-Sec) 4 Inch Red LED Display with Wall Mount Option/Crystal Time Base/3 Wire Power
ESE
Item# ESE-ES-942CW
The ES-942 (12hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-942/944 uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Fast, Slow and Hold controls are accessible on the top of the case. This model includes the following options: C - Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming...
Our Price: $919.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
100 Minute 1/2 Inch High Yellow Digit Up/Down Timer
ESE
Item# ES 301U
4 Versions Available
The ES 301U and ES 380A are presentable 100-minute Up/Down Timers. Units are "preset" by advancing the proper digit using the "Min-Set" or "Sec-Set" control. The ES 380A has 1" high yellow LED displays and is controlled via rear mounted connectors, while the ES 301U has .55" high yellow LED displays and has six front mounted controls. NOTE: PLEASE CALL BEFORE ORDERING FOR CUSTOMIZATION!! THANK YOU Features: .55" Yellow LED Display 100 Minute Up / Down count range (00:00 -...
Read More
Our Price: $308.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 964U 2.3 Inch 24 Hour Digital Clock
ESE
Item# ES-964U
The ES-964U (24 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-964U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). Features: 2.3" Red LED Display Viewing Distance 70' 12 hour (ES-962U) or 24 hour (ES-964U) display 220-240 VAC (110-120...
Our Price: $598.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES572U 12 Hour 7/16 Inch Digit Clock Timer
ESE
Item# ES 572U
3 Versions Available
The ES 572U (12 Hour) and ES 574A (24 Hour) are 6-digit "Clock/Timers" with .4" high red LED displays and are designed for console mount applications. All controls are accessible on the rear mounted edge-card connector. Otherwise, the unit is similar in function and operation to the ES 562F / ES 564F. Front mounted switches are optional. Built-in "UP" Timer.
Read More
Our Price: $256.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE-LX-5212U Digital/Analog 12-Inch Clock - SMPTE/EBU & ASCII Input - Amber LED
ESE
Item# ESE-LX-5212U
The ESE LX-5212U is a 12" Digital and Analog Clock. The unit is designed to read and display time as received from most any source of time code. Alternatively, the clock may be manually set and operated in stand-alone mode. Six 1" high LEDs display hours, minutes and seconds. Simultaneously, 60 discrete LEDs simulate the "analog" sweep of the Second Hand. Twelve other discrete LEDs, located around the dial at 5-second increments, stay lit continuously and serve as reference indicators. Three...
Our Price: $751.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-371 100 Min Up/Down Timer Console Mt w/Remote Control Thumbwheel Preset
ESE
Item# ES-371
The ES-371 is a 100 Minute Up / Down Timer in a console-mount enclosure. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable.
Our Price: $413.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 962U 2.3 Inch 12 Hour Digital Clock
ESE
Item# ES-962U
The ES-962U (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-962U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Set, Select and Date controls are accessible on the top of the case (or on the front panel when the Rack Mount option is ordered). Features: 2.3" Red LED Display Viewing Distance 70' 12 hour (ES-962U) or 24 hour (ES-964U) display 220-240 VAC (110-120...
Our Price: $598.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-362UXD 302U/Serial Output Drive Up/Down Timer with Remote Control 6 ft Cable Connect Switch Plate 3 Relay Output
ESE
Item# ESE-ES-362UXD
The ES-362UXD is a 100 Minute Up/Down Timer. The ES-362UE is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides...
Our Price: $588.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Green LEDs w/ 1 Inch Seconds Time Code Remote Display w/ Black 19 Inch Faceplate
ESE
Item# ESE-ES993UPBK-GN
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) Green LED displays. The unit is housed in a Black Anodized Front Panel. The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted...
Our Price: $665.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-5116U 16 Inch Self-Setting Analog Remote Clock Display
ESE
Item# ESE-LX-5116U
The LX-5116U is a Wall Mount Analog Clock with a 16" viewing diameter. The LX-5116U is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. It can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch permits the clock to display time as received from a source of SMPTE/EBU, ASCII or ESE Time Code (the Impulse Clock mode may be replaced with an IRIG-B input mode as a factory option)....
Our Price: $655.40
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362U Up/Down Timer with Serial Output (Rackmount Option)- Black
ESE
Item# ES-362UP-BLACK
The ES-362U is a 100 Minute Up/Down Timer. The ES-362U is housed in a folded aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely...
Our Price: $479.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-161UEP Time Code Remote Display with 19 Inch Front Mount Rack Panel (Option P)
ESE
Item# ESE-ES-161UEP
The ES-161UE is a Time Code display featuring .56" yellow LED displays and 19 inch front mount rack panel. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0" "1" or "A" at 9600 baud may be input via the rear-mounted 9-pin connector. The ES-161UE will automatically determine which code is being received. An internal DIP switch is used to configure the display...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE .55 Rack Mount Serial Slave Clock Black Case
ESE
Item# ES-161UP-BLACK
The ES-161U/LX-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day...
Our Price: $270.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 391U 2.3 Inch 100 Minute Up/Down Timer
ESE
Item# ES-391U
The ES-391U is a 100 Minute Up / Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 2.3" Yellow LED Display 100 Minute Up / Down count range (00:00 - 99:59) Thumbwheel Time Preset Up, Down, Stop, Reset & Preset functions Remote Control Input / Control Plate Optional 5.25" Rackmount enclosure (option "P") 220-240 VAC (110-120 VAC...
Our Price: $641.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-166UE 6-digit 1 Inch Amber LED Time Code Reader In Desk Mount Enclosure / Option P
ESE
Item# ES-166UP
2 Colors Available
The ES-166UE is a Time Code display featuring 1" Amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-166UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the...
Read More
Our Price: $410.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-562U-ESE 0.55-Inch Desktop Combo Clock/Up-Down Timer with ESE Option
ESE
Item# ES-562U-ESE
The ES-562U (12 hour)/ES-564U (24 hour) is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case. Features: .56" Yellow LED Display Independent...
Our Price: $441.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDD05i 12.7mm Remote Display for CDU CDSOFT & CW
Interspace Industries LLC
Item# INTI-CDD05I
Mini Display is just that. Quite mini with a novel case design which allows the unit to be placed flat or at a viewing angle that is comfortable with a presenter, i.e looking down at their notes or comfort monitor. It is still tri-colour and connects to the main system via a standard XLR cable. As it is a Hexagon, the display can be a 180 degrees for straight mounting or at 120 degrees for great visibility on a Lectern or podium. Character height is 12.7mm or 1/2 inch. Features: Specifications:...
Our Price: $316.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDD5i CountDown Maxi Display w/5-Inch Numbers for CD Touch and FiliBuster Timing Systems
Interspace Industries LLC
Item# INTI-CDD5I
The Interspace Industries CDD5i five inch display for CD Touch and FiliBuster is ideal for large venues needing discrete visual time indicator. CountDown Maxi Display 5" high numbers - highly visible from the back of the room. A mounting bracket that can be reversed for ceiling mounting as well as for wall and floor. Suppled with PIM, a Power Input Module and separate 24V power supply. The PIM injects 24V in to the line so you still only have a single cable which is reversed...
Our Price: $1,020.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Interspace Industries CDTouch CountDown Touch Control Unit for CDD05/CDD1/CDD3i
Interspace Industries LLC
Item# INTI-CDTOUCH
CountDown Touch is another generation design for our timing products. Its features have been improved to create an easy to use product aimed at technicians themselves. Inspired by touch screen phones etc. our CountDown Touch works using the same principles. Traffic light colours on the display gives the presenter another comfortable and familiar sense of time frame in which the presentation is enclosed. CountDown Touch has 4 memory locations for fast programming. It can count time up as well...
Our Price: $984.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
ESE ES-161UE/P/NTP-C .55-Inch 6-Digit ESE/SMPTE/EBU/ASCII Serial Slave - Desk Top - Amber LED(9) with 19Inch Rack Mount
ESE
Item# ES-161UE-P-NTP-C
The ES-161UE/P/NTP-C is a Time Code display featuring .56" yellow LED displays with the NTP-C Option: NTP Client: NTP Client Displays synchronize exclusively with an NTP server (replaces all standard inputs). This also come with the P Option: 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™,...
Our Price: $329.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-104A GPS Based NTP Time Server with Rack Mount Option
ESE
Item# ES-104AP
The ESE ES-104A is a GPS based NTP time server with rack mount option.
Our Price: $1,947.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE LX-5112U-LIGHT 12 Inch Self-Setting Analog Remote Display Clock with Light Option
ESE
Item# ESE-LX5112ULIGHT
The ESE LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter and lighted dial. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time CodeT. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself...
Our Price: $629.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE 192UE-C-P-RS Economy Line-Frequency Master Clock (6-Digit 12 Hour) - Stand Alone - Crystal Time - 19 Inch Rack Mount
ESE
Item# ESE-192UE-C-P-RS
ESE 192UE (12 hour)/ES-194UE (24 hour) is a low-cost Master Clock for applications not requiring GPS or temperature controlled stability. Like the LX-192UE/194UE, the ES-192UE/194UE uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time & Date data are output to Slave displays via the TC90™ Time Code output. The unit automatically compensates for Daylight Saving Time but this may be defeated by means of an internal solder jumper....
Our Price: $419.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 362UE/D/P Master 100 Minute Up/Down Timer w/Remote Control & Rackmount Options - Clear Finish
ESE
Item# ESE-ES-362UE-D-P
The ESE ES-362UE is a 100 Minute Up/Down Timer with Options D and P* factory installed. The ES-362UE is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted...
Our Price: $580.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 996U-CW-NTP-C/PoE 2.3-Inch - 6 Digit ESE/SMPTE/EBU/ASCII Serial Slave Time Display - 15-Inch Wall Mount - Red LED
ESE
Item# ESE-ES996UCWNTPC
ESE ES 996U-CW-NTP-C/PoE is a 2.3-Inch, 6 Digit ESE/SMPTE/EBU/ASCII Serial Slave Time Display with a 15-Inch Wall Mount, PoE option that receives 48V operating power via Ethernet cable and Red LED display. The ES-996U/NTP-C is an NTP Time Display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP...
Our Price: $795.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-380UEP 100 Minute Up/Down Timer with Rack Mount & CLEAR Options
ESE
Item# ES-380U
2 Colors Available
The ESE ES-380UEP is a 100 Minute Up/Down Timer in a19" rackmount front panel. Up, Down, Stop, Minute-Set, Second-Set and Reset control inputs are accessible on the rear connector. Features: 1" Yellow LED Display 100 Minute Up/Down count range (00:00 - 99:59) Up, Down, Stop, Min-Set, Sec-Set & Reset Inputs Optional Remote Control Plate (option "D") 220-240 VAC (110-120 VAC is standard) & UL options available
Read More
Our Price: $400.66
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-381U 100 Minute Up/Down Timer with Remote
ESE
Item# ES-381U
2 Colors Available
The ESE ES-381UE is a 100 Minute Up/Down Timer in a desk-top case. Up, Down, Stop, Reset & Preset control switches, as well as the Numeric Thumbwheel Preset switch are provided on the remote control plate, joined to the unit via a 6' cable. Features: 1" Amber LED display 100 Minute Up/Down count range (00:00 - 99:59) Thumbwheel Time preset Up, Down, Stop, Reset & Preset functions Remote Control Input/Control Plate Optional 3.5" rackmount enclosure (Option "P") 220-240 VAC...
Read More
Our Price: $546.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-520UE 60 Minute Master Timer
ESE
Item# ES-520U
2 Versions Available
The ESE ES-520UE is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote control input 4 Isolated Trigger Reset inputs Optional Tenths of Seconds display ESE Timer CodeT output Optional...
Read More
Our Price: $175.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Sonifex AVN-GMCOS PTP Grandmaster Clock GPS IP TXCO - Rackmount
Sonifex Ltd.
Item# SON-AVN-GMCOS
The AVN-GMCS is a PTPv2 grandmaster clock for use with AoIP applications. IEEE1588-2008 PTPv2 (precision time protocol) is used to synchronise all the nodes within a network. To achieve this one of the nodes must become the master clock and distribute time packets to the others. The AVN-GMCS is designed to perform this role simply and accurately, enabling sub micro second synchronisation between all nodes. RAVENNA (of which AES67 is a subset) allows for the distribution of audio...
Our Price: $3,124.16
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 942 Stand-Alone Clock
ESE
Item# ES 942
The ES-942 is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-942 uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Fast, Slow and Hold controls are accessible on the top of the case.
Our Price: $831.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE CA-TNCM-TNCF-50 TNC Male to TNC Female Antenna Extension Cable - RG58 - 50 Foot
ESE
Item# CA-TNCM-TNCF-50
ESE offers Antenna Extension Cables to be used with GPS Master Clock Systems, specifically, to extend the cable run between the GPS Antenna and the Master Clock. These cables are made with RG-58 coaxial wire with an impedance of 50 Ohms. The CA-TNCM/TNCF50 is a 50 Foot TNC Male to TNC Female Cable Features: Specifications:
Our Price: $270.00
Availability: In Stock
Add to Wish List
ESE ES-996U/NTP-C/POE RED 2.3 Inch Time Code Display with Red LEDs / NTP-C and PoE Power Options
ESE
Item# ESE-996UNTPCPOER
The ESE ES-996U/NTP-C/POE RED is an NTP Time Code Display featuring 2.3" high red LED displays and PoE. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. The unit accepts, via the rear-mounted terminal block,...
Our Price: $708.12
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 520U D 60 Minute Master Timer Desktop Version with Remote Control
ESE
Item# ESE-ES-520U-D
The ES-520U is a 60 Minute Up Timer. Start, Stop and Reset controls are provided on the front of the case. A remote control input is accessible on the rear-mounted DB-9 connector, which also supplies ESE Timer Code for driving up to 100 remote slave displays. This unit features a Remote Control Option which consists of a connector wired to switches on a control plate via a six-foot cable. Features: .56" Yellow LED Display 60 Minute Up count range (00:00 - 59:59) Start, Stop, Reset functions Remote...
Our Price: $220.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-161UE-P-RED Time Code Remote Display with 19 Inch Front Mount Rack Panel and Red LED Display (Option P/Red)
ESE
Item# ESE-ES-161UEPRED
The ESE ES-161UE is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-161UE will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or...
Our Price: $270.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 996U NTP-C P 6-Digit Clock with NTP-C with 2.3in High Red LED Display and 19 Inch Rack Mount Option
ESE
Item# ESE-ES-996UNTPCP
The ESE ES-996U/NTP-C-P is an NTP Time Display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. Included Option: P: 19" Front Panel (Rack Mount): Designed for mounting...
Our Price: $720.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 562UE .55 Inch Combo Clock/Up & Down Timer - 12 Hour - Black with Option P 19 Inch Rack Mount
ESE
Item# ES-562UE-BK-P
The ESE ES-562UE Option P (12 hour)is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case. Option P - 19" Front Panel (Rack...
Our Price: $465.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator w/ Option NTP6 / NTP Time Server
ESE
Item# ESE-185F-NTP6
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $2,935.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
DSan TP-2000X-PC RS485-to-RS232 Adapter to Allow Cue Lights to be Triggered by Touch Panel Control Systems
DSan Corporation
Item# DSA-TP-2000X-PC
DSan TP-2000X-PC is a RS485-to-RS232 adapter that will allow the Cue Lights to be Triggered by Touch Panel Control Systems. Control cue lights with touch panel systems or other show control systems that accept serial data. Program button controls with simple plain-text commands. The touch panel can trigger any of the three commands (typically Forward, Back and Screen Blank) and can display lights associated with these commands as triggered by the remote transmitter. This is connected to...
Our Price: $285.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
DSan TMPT Battery-Powered Timekeeper Controls Red-Yellow-Green Phase Lights - Programmable
DSan Corporation
Item# DSA-TMPT
DSan TMPT TimePrompt triggers green, yellow and red lights in pre-programmed sequences from 15 seconds to 90 minutes. The timer can count up or count down, and beep manually or automatically on the light changes. Light sequences that are preset can be reprogrammed via a free programmer application that runs on a USB-connected PC. As soon as the clock starts, the TimePrompt digital display changes to show the time remaining or the elapsed time depending on the mode. For sophisticated applications,...
Our Price: $199.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-992U 12-Hour Six Digit Stand-Alone Clock
ESE
Item# ES-992U
2 Versions Available
The ESE ES-992U (12 hour) is a stand-alone clock for applications not requiring GPS or temperature controlled stability. The ES-992U/994U uses the AC line-frequency as a time reference or, optionally, a quartz crystal timebase may be specified. Time Set & Date Display controls are accessible on the top of the case. Features: 2.3" (Hours & Minutes)/1" (Seconds) Yellow LED Display Viewing Distance 70' 12 hour (ES-992U) display 220-240 VAC (110-120 VAC is standard) & UL options available Various...
Read More
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES AB1A 5 VDC Power Supply for LA-12Fand LA-12FN
ESE
Item# ES-AB1A
The ES-AB1A is a 5 VDC power supply for driving up to four Inline GPS Amplifiers (LA12F or LA12FN). An internal isolation circuit directs the power to the antenna and amplifiers while passing only the returning GPS signal to the GPS Receiver. Features: Provides Ample +5 VDC Power for Multiple GPS Inline Amps Connects Between Master Clock and Antenna Cable Rugged Desk Top Enclosure
Our Price: $299.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-185F GPS Master Clock / Time Code Generator - w/ Options NTP6/ANT/K
ESE
Item# ES-185FNTP6ANTK
The ES-185F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-185F generates several types of time code including SMPTE/EBU LTC, ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-185F to easily interface with new or existing computers, automation and clock...
Our Price: $3,209.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 160F Stand-Alone Quartz Master Clock with One Second Per Month Accuracy - 1.75 Inch Rack Mount
ESE
Item# ESE-ES-160F
ESE ES 160F is a crystal-based Master Clock / Time Code Generator. The unit employs a temperature compensated crystal oscillator (TCXO) which provides the ES-160F with an accuracy of one second per month. Six .56" yellow LED's display the real time or date while the unit simultaneously generates several types of time code. The unit provides a Coin Cell for time backup. Features: SMPTE-LTC/EBU, ESE, ASCII (RS-232 & USB) Time Code Outputs Universal Power Supply (90-264 VAC) Optional 10...
Our Price: $1,660.15
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 362UEP 100 Minute Up-Down Timer with Rackmount Option
ESE
Item# ESE-ES-362UEP
The ESE ES-362UE is a 100 Minute Up/Down Timer. The ES-362UE is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely...
Our Price: $463.55
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX-362U 100 Minute Master Up/Down Timer
ESE
Item# LX 362U
The ESE LX-362U is a 100 Minute Up/Down Timer. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-25 connector provides access to remotely control the five pushbutton switch functions....
Our Price: $535.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 562U .55in Combo Clock/Up and Down Timer - 12 Hour
ESE
Item# ES-562U
The ES 562U (12 Hour) and ES 564F (24 Hour) are 6-digit "Clock/Timers" with .55" high yellow LED displays. Once time of day has been set, the unit can be switched into the "Timer" mode and be used as a 12/24 hour timer. Subsequently, the unit can be "toggled" from the "Clock" mode to the "Timer" mode with no loss of real time or elapsed time. Built-in "UP" timer.
Our Price: $413.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362U Up/Down Timer with Serial Output
ESE
Item# ES-362U
The ES 302A is a presetable 100 minute up/down timer with .56" yellow LED displays. Units are "preset" using a lever wheel switch and controlled by five front mount controls. The ESE Serial "Timer" Code output is a BNC connector and is capable of driving 100 ESE Serial "Timer" Code Slaves. Features: .56" Yellow LED Display 100 Minute Up/Down count range (00:00 - 99:59) Thumb wheel Preset ESE Timer CodeT output Remote Control input Optional relay-contact closure output at zero Optional Stop...
Our Price: $400.00
Availability: In Stock
Add to Wish List
ESE ES-161U Universal Time Code Reader - 6-digit - .56 inch Amber LED in Desk Mount Enclosure
ESE
Item# ES 161U
The ES-161U/LX-161U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 161U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display...
Our Price: $218.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES ANT Active High Performance Dual Filtered Outdoor GPS Antenna for Harsh RF Environments
ESE
Item# ES ANT
The ESE ANT is an Indoor/Outdoor Active GPS Antenna optimized for fixed location timing applications that can replace the standard GPS antenna in harsh RF environments. Perfectly suited for harsh RF environments and a similar replacement for Panasonic Marine II antenna. The antenna supplied with ESE GPS Master Clocks is designed to provide excellent reception under a variety of conditions. For best results, the top of the antenna should have at least a partial view (unobstructed line of sight)...
Our Price: $242.49
Availability: In Stock
Add to Wish List
DSan PRO-2000-KIT2 Limitimer System Conference Kit with Carry/Storage Foam Padded Case and Small Audience Signal Light
DSan Corporation
Item# DSA-PRO-2000KIT2
DSAN PRO-2000-KIT2 Limitimer Conference Kit offers a complete timing solution. It includes the Limitimer Speaker Timer (PRO-2000-T), Podium Signal Light (PSL-20V), and Audience Signal Light with 2-inch solid LED digits (ASL2-ND3), delivered in a high-quality watertight transit case with custom foam compartments for cabling. Features: 12-volt external power supply Two Cat5 and one XLR data jacks Four Programmable time settings Variable audio sounds Blow molded case with custom foam...
Our Price: $1,530.00
Availability: In Stock
Add to Wish List

Count Down Timers & Digital Studio Clocks were originally designed for use in radio and Television control rooms but are used in a wide variety of professional applications where the multi-format seconds display provides an invaluble additional analog complement to the digital time information. Count Down Timers & Digital Studio Clocks have many useful applications and are often found in industrial plants, radio and tv stations, churches, hospitals, military installations, gyms, science labs, and more. Choose yourCount Down Timers & Digital Studio Clocks wisely and contact the pros at Markertek!

Sign In

Count Down Timers & Digital Studio Clocks

Narrow Products

By Brand

By Price Range

Filter By