Direct Boxes

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Whirlwind IMP 2 Standard Direct Box - 1/4-Inch Parallel Wired In/Out Jacks
Whirlwind
Item# IMP-2
The IMP 2 (IM2) is an economical alternative perfect for all of your direct box needs. Built rugged on the inside and outside, this is the world famous DI found in pro systems everywhere. The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal. The IMP 2 includes a ground lift switch and 1/4"/XLR inputs/outputs. Features: 1/4" parallel wired in/out jacks Ground Lift switch to help isolate hum and buzz Uses Whirlwind's TRHL transformer...
Our Price: $92.00
Availability: In Stock
Add to Wish List
Radial R800 1100 Pro DI Full Range Passive Direct Box
Radial Engineering
Item# RAD-PRODI
2 Types Available
The Radial Pro DI is a passive direct box that combines exceptional audio performance with solid dependable construction, making it the ideal general duty direct box for stage and studio. The heart of the ProDI is a custom wound Radial transformer. It features an exceptionally high 140k Ohm input impedance to reduce loading while enabling the ProDI to handle extreme signal levels at all frequencies without distortion. This is further improved upon with an internal MuMETAL shield to protect...
Read More
Our Price: $129.99
Availability: In Stock
Add to Wish List
Whirlwind PCDIHW Direct Box Dual with RCA 1/4 Inch Inputs 1/8 Inch Hardwired Input Tail 30 Inch
Whirlwind
Item# WW-PCDI-HW
The Whirlwind pcDIhwb is a PCDI with a hard wired tail terminated with a stereo 3.5mm plug, perfect for interfacing the outputs of CD players, computer sound cards, iPODs / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment (with no chance of losing the cable). This unit contains two separate DIs - input your signals with one hard wired, 30 inch 3.5mm (1/8") mini TRS stereo plug, two sets of color coded RCA phono type input and through jacks or 1/4" TS input jacks....
Our Price: $233.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial ProD8 Eight Channel Rackmount DI
Radial Engineering
Item# RAD-PROD8
The Radial ProD8 is a high performance 8-channel passive direct box optimized for keyboard rigs in professional touring. The design begins with fully redundant dual 1/4" inputs on all channels. These are summed together to enable the system tech to patch in a backup keyboard and have it on standby should a device go down during a show. This also enables up to 16 keyboards or 8 stereo sets to be connected should the need arise. A (shared) 1/4" TRS effects insert jack on each channel allows two keyboards...
Our Price: $999.99
Availability: In Stock
Add to Wish List
Radial J48 Active 48V Phantom Powered Direct Box w/Digital Switching Supply
Radial Engineering
Item# RAD-J48
The Radial J48 is a great sounding active direct box that has been optimized to produce maximum headroom while working within the limited current available from standard 48V phantom power. By employing a unique switching power supply, the J48 is capable of peak transients to 9 volts without choking. The result is lower harmonic distortion, half the inter-modulation distortion and significantly improved dynamics over other DIs. Features include a -15dB pad, 180degree polarity reverse, a unique...
Our Price: $249.99
Availability: In Stock
Add to Wish List
Radial Engineering JDI-STEREO R800-1012 Passive DI Stereo for Acoustic Guitar/Bass/Keyboards
Radial Engineering
Item# RAD-JDI-R8001012
This Radial Engineering R800-1012 JDI Stereo is a high performance 2-channel passive direct box for live concert touring and professional recording applications, featuring premium Jensen transformers for exceptional audio performance. Features: Jensen transformer equipped passive DI Eliminates hum and buzz from ground loops Virtually zero phase & harmonic distortion Exceptional signal handling and noise rejection Compact stereo format for twice the performance Specifications: Harmonic...
Our Price: $379.99
Availability: In Stock
Add to Wish List
JENSEN JT-DB-E Direct Box Transformer
Jensen Transformers
Item# JT-DB-E
When loaded by the 1 kS input impedance typical of mic preamplifiers, this transformer has a 140 kS input impedance, making it ideal for high impedance sources. It can be used with or without an active buffer as a "direct box" for electric guitars or synthesizers. A 30 dB magnetic shield package is standard. Features: Converts unbalanced line levels to balanced mic level output Stops "hum and buzz" problems in musical instrument hook-ups Allows use of long cables without high frequency loss High...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial J48 Stereo Active DI for Acoustic Guitar & Bass with Extra Headroom and High-Pass Filter
Radial Engineering
Item# RAD-J48S
The Radial J48 Stereo is a high performance active direct box designed for professional touring and studio recording. It features the same award-winning signal path that has made the single channel J48 the most specified active direct box on tour today. And with users as diverse as Paul McCartney, Tommy Emmanuel and Joe Chiccarelli, you can be sure it will meet the most demanding qualifications. The design begins with a rugged 14 gauge steel construction and a bookend design that protects sensitive...
Our Price: $379.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL TX-LC2 Unbalanced to Balanced Line Combiner
Radio Design Labs
Item# TX-LC2
The RDL TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line. The input circuits are high-impedance, line-level (-10 dBV) and are each isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. The output from the TX-LC2 is a mono mix of the stereo signal. Gain of the combined signals is adjustable...
Our Price: $138.67
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Whirlwind PCUSB Direct Box - USB-B Input - Stereo XLR Balanced Output
Whirlwind
Item# WW-PCUSB
The Whirlwind pcUSB converts the digital audio from USB outputs to high quality analog, stereo, balanced audio for easy connection to PA systems, mixing boards, etc. USB 2.0 compliant with no device driver requied. Operating power is supplied from the USB port in the host device. Sample rates of 32 kHz, 44.1 kHz and 48 kHz are supported at 16 bits. A USB hookup cable is included. Digital signal is input via a standard USB Type B jack. Output is via left and right balanced XLRs. A digital 0...
Our Price: $248.00
Availability: In Stock
Add to Wish List
Switchcraft SC800 Passive Instrument Direct Box with Custom Transformer
Switchcraft
Item# SW-SC800CT
The 800 Series Instrument Direct Box converts the unbalanced outputs of musical instruments to balanced, mic level signals that can be connected to audio consoles and mic preamps. Dual 1/4" throughputs enable connection to multiple devices such as an amp and a tuner, two amps, etc. A premium, fully shielded isolation transformer protects the purity of your sound from ground loops while providing a truly uncolored audio output.
Our Price: $125.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
On Stage Stands DB500 Direct Box
On-Stage Stands
Item# OSS-DB500
The DB500 Direct Box transforms any high-impedance 1/4" source into a low-impedance (XLR) signal ready to be sent long distances to a mixing board or recording console. Its passive design features a high quality transformer, ground lift switch, and does not require batteries or phantom power. Perfect for bass/acoustic guitar, keyboards, and DJ equipment.
Our Price: $40.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-DIPRO Studio-Quality High Fidelity Passive DI Box
Sescom
Item# SES-DIPRO
Musicians and Sound Engineers once swore by those old bright blue DI boxes from Sescom. So by customer demand, Sescom brings back its famous DI Box enlisting our vast knowledge of transformers developed through countless prototypes actually tested in the real world. This is the simplest and best sound-by-design direct box for connecting a high-impedance, line level, unbalanced output signal to a low-impedance microphone level balanced input via XLR. Due to it's combo jack input and 3-way attenuation,...
Our Price: $153.95
Availability: In Stock
Add to Wish List
Radial SB-5 Compact Stereo DI For Computers W/ Attached Cable Stereo or Mono Out
Radial Engineering
Item# RAD-SB-5
The Radial Stage Bug SB-5 is a compact stereo direct box designed to accommodate laptop computers, tablets and other consumer audio products when amplifying the signal through a PA system. The passive design begins with an integrated input cable that connects from the headphone out via a flexible 1.5m (5') cable that is terminated with a standard 3.5mm (1/8") stereo connector. The cable is secured via a clamping strain relief and is wrapped using the sidewinder cleat for easy storage. This of course...
Our Price: $119.99
Availability: In Stock
Add to Wish List
Radial SB-2 Compact Passive DI For Bass & Keyboards W/ Stereo To Mono Mix
Radial Engineering
Item# RAD-SB-2
The Radial StageBug SB-2 Passive is a high-performance direct box made for players who are on the move! Made to fit inside of a guitar case, the SB-2 is ultra compact yet is feature-packed to ensure great performance on any stage. The compact design begins with a 1/4" input and thru-put to feed the on-stage amp. This connects to the custom made Eclipse ET-DB3 transformer which performs the impedance matching and balances the signal. When using extra high output instruments, a -15dB pad can be inserted...
Our Price: $89.99
Availability: In Stock
Add to Wish List
ARX AV-DI Audibox AV DI Stereo AV Active DI Box Stereo Converter
ARX America
Item# ARX-AV-DI
Stereo AudioVisual Active Direct box, with dual RCA or stereo mini jack input and dual XLR outputs. The AV DI is ideal for interfacing computer sound cards with pro sound systems. Heavy duty all-steel chassis, -20 dB Pad switch, plus Phantom or 12 - 15V DC power options. Permanent soft audio ground network prevents ground loops, providing pristine audio quality. Ideal for interfacing any consumer stereo audio signal (especially notebook computer sound cards) with the balanced inputs of professional...
Our Price: $263.12
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARX IC-1 Audibox Iso Combiner Transformer Two Sources Into One XLR
ARX America
Item# ARX-IC-1
The ISO-Combiner is a new transformer isolated combiner for the Audibox range of Pro Audio tools and problem solvers. It is ideal for use in applications where two sources have to be combined into one signal, silently and easily. A pair of transformer balanced female XLR inputs combine to deliver a single transformer isolated male XLR output in this essential audio package. Available in Single Channel or Double Header format. Needs no power. Features: Specifications:
Our Price: $198.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARX PDI-1 Audibox Pro DI Active Direct Box with High-Z & Speaker Level Inputs
ARX America
Item# ARX-PDI-1
A flexible, compact Active Direct box, with normal High Impedance input as well as a separate speaker level input for connection to an aux speaker output on the back of instrument amplifiers. Heavy duty all-steel chassis finished in attractive matt textured powdercoat, with hardwearing epoxy screen printing and slip resistant rubber pads. Features include -20 dB Pad and Audio Ground Lift switches, plus Phantom or 12V DC power options. Security features include Kensington-type computer lock...
Our Price: $198.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARX PDI-2 Audibox Pro DI Duo Stereo Active Direct Box with High-Z & Speaker In
ARX America
Item# ARX-PDI-2
The ARX PDI-2 is a flexible, compact Active Direct box, with normal High Impedance input as well as a separate speaker level input for connection to an aux speaker output on the back of instrument amplifiers. Heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber pad. Features: -20 dB Pad and Audio Ground Lift switches Phantom or 12V DC power options Kensington®-type computer lock...
Our Price: $263.12
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Tonebone Bassbone V2 Bass Preamp and DI Box
Radial Engineering
Item# RAD-BASSBONEV2
Like the original, the second generation Bassbone V2 features the same award-winning audio circuit that has made the Bassbone a top choice for many of the world's most prominent bass players including Marcus Miller, John Patitucci, Rhonda Smith and Victor Wooten. Simply stated, the Bassbone V2 is a bass command center. Connect any two basses and seamlessly toggle between them using a footswitch. Each channel has a separate level control to balance the two instruments and is augmented with a unique...
Our Price: $399.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial BigShot ABY True Bypass Switcher
Radial Engineering
Item# RAD-BSHOTABY
The Radial BigShot ABY is a compact ABY switcher that enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time. Designed for the purist, this true-bypass ABY switcher is completely passive meaning that there are no tone altering buffers in between the guitar and the amplifier. With the BigShot ABY, you get the pure tone from your guitar plugged direct into your amp! To add versatility, the BigShot ABY is also equipped with a separate...
Our Price: $129.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial BigShot I/O True Bypass Instrument Selector
Radial Engineering
Item# RAD-BSHOTIO
The Radial BigShot i/o is an easy to use instrument selector switch that lets you quickly transition between any two instruments and drive the signal to your amp. Because the i/o is 100% true-bypass, it addresses the needs of the most demanding purist. To further enhance connectivity, input-B is equipped with a level control called DIM that lets you reduce the signal from the louder of your two instruments so that both instruments are matched to the same volume level when they reach the amplifier....
Our Price: $129.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Engineering HDI High-Definition Studio-Grade Direct Box with Transformer Saturation - Line Output
Radial Engineering
Item# RAD-HDI
The Radial HDI is a studio-quality direct box designed to create exceptional recordings with any instrument, utilizing premium Jensen transformers and a unique Color control that provides an entirely new yet familiar-sounding sonic palette to experiment with. Instant Gratification Despite the complex circuitry housed within the unit, the HDI has an elegant set of controls that allows the musician or engineer to dial up a record-ready sound with a minimal amount of tweaking required....
Our Price: $949.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial JDV Mk5 Super DI - Active Class-A Direct Box
Radial Engineering
Item# RAD-JDV-MKV
The Radial JDV Mk5 is a high performance active direct box and preamp with two inputs that enables the user to seamlessly transition from one instrument to another while being able to optimize the signal chain no matter what the source. The design begins with 100% discrete electronics and a unique class-A circuit with zero phase-cancelling negative feedback front-end. This is augmented with Drag control load correction that lets you optimize the impedance that is being applied to the pickup along...
Our Price: $749.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial SB-4 Compact Active DI For Piezo Pickups Low-Cut Filter 48V Phantom
Radial Engineering
Item# RAD-SB-4
The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 10meg-ohm impedance that smoothes out troublesome...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ZOOM AC-3 Acoustic Creator Multi-Effects Processor Direct Box
ZOOM
Item# ZOOM-AC-3
Like its little brother, the ZOOM AC-3 Acoustic Creator is an enhanced direct box with essential DI features that help you achieve great tone no matter where you play. The AC-3 is equipped with an effects generator, stereo outputs, and a compressor. With these features plus the same high-quality preamp and 3-band EQ as the AC-2, the AC-3 is an all-in-one acoustic toolkit that's perfect for live performance and studio. The AC-3 puts essential DI features right at your fingertips. Its high-quality...
Our Price: $299.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Engineering Backtrack Stereo Backing Track Switcher with 3.5mm & 1/4 Inch Inputs and Isolated DI Outs
Radial Engineering
Item# RAD-BACKTRACK
The Backtrack is a compact stereo audio switcher, perfect for bands running redundant backing tracks on stage. Connect both source devices to the Backtrack via ¼" or 3.5mm connectors, and switch between them or mute them altogether using the front panel controls or a JR-2 remote footswitch. A headphone output with level control allows you to check either input at any time, and ¼" monitor outputs feed powered speakers for playback on stage. Dual XLR outputs feed the...
Our Price: $459.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial X-Amp Active Re-Amplifier
Radial Engineering
Item# RAD-XAMP
The Radial X-Amp is an active re-amping device that presents the engineer / producer with a new and innovative creative tool that allows a pre-recorded track from a line level device to drive two guitar amplifiers or effect pedals simultaneously. This opens the door to explore new musical sounds and spur on the creative process. Following the critically acclaimed Radial JD7 Injector, the X-Amp employs a unique Class-A circuit design that has been optimized for use with guitars. Using the X-Amp...
Our Price: $249.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Engineering SB-5 Desk Mount L-Bracket for Radial StageBug SB-5 Laptop Direct Box
Radial Engineering
Item# RAD-SB-5-BRACKET
The Radial StageBug SB-5 may be permanently affixed to a desktop, podium, or inside a rack should the need arise using the SB-5 Bracket. Installation is easy, simply remove the sidewinder cable holder with a Phillips head screwdriver and attach the bracket between the sidewinder and the SB-5 chassis. The SB-5 Bracket provides a secure flange that allows you to bolt down the SB-5 to any surface. Please Note: The StageBug SB-5 does not come with the SB-5 Bracket.
Our Price: $29.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Rolls HR187 Stereo Professional Bluetooth Direct Box
Rolls Corporation
Item# RLS-HR187
The Rolls HR187 Bluetooth Audio DI is the perfect solution for converting Bluetooth audio to a professional audio system. Link the HR187 to any Bluetooth device from a laptop, tablet, smart phone, or other mobile device, then connect to any XLR, RCA, or 1/8" stereo or mono audio system. The steel chassis provides durability that will last, and the proprietary radome antenna technology gives an enhanced reception range. Features: Balanced line level XLR stereo or mono outputs and a Stereo...
Our Price: $159.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Rolls DB425 4 Channel Audio Direct Interface with Balanced XLR Outputs - 35kHz-20kHz
Rolls Corporation
Item# RLS-DB425
Discover flawless audio connectivity through the innovation of the Rolls DB425 Audio Direct Interface. This ingenious adapter redefines audio connectivity, powered by custom-made, fully potted balanced nickel-laminated transformers, ensuring an unparalleled studio signal quality. Unlike its active counterparts, the DB425 operates as a passive device, eradicating the need for power sources and seamlessly integrating into your setup with absolute ease. Meticulously engineered for precision,...
Our Price: $249.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PAN02 DI Box active
Palmer Audio
Item# PLM-PAN02
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73...
Our Price: $89.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PAN08 19 Inch DI/Line Isolation Box 4 channels active
Palmer Audio
Item# PLM-PAN08
The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear). The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 Ohms with 0.05 %...
Our Price: $519.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio TRAVE Passive Re-Amplification DI Box for Signal Routing from DAW or Mixer
Palmer Audio
Item# PLM-PTRAVE
Reamping is a valuable recording technique used by many sound engineers. It lets you experiment at leisure by running guitar, bass, keyboard, drum and even vocal tracks through amplifiers and effects pedals. As with many other techniques, you need the right tools. The Palmer trave is a passive reamping box that requires no external power supply. Inside is a specially developed transformer that converts the balanced line signal into an unbalanced Hi-Z signal with perfectly matched...
Our Price: $79.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Palmer Audio WIPPER Passive DI Box with Balancing and Impedance Matching
Palmer Audio
Item# PLM-PWIPPER
If you need to pick up the pure sound of your guitar, bass or keyboard, you need a high-quality DI-Box which does not alter the natural sound or add any noise. The Palmer wipper is a single channel passive DI box with a high-quality transformer, which also handles high levels without distorting or losing the pure sound of your instrument. With a ratio of 10:1, it can be used for optimal impedance and level adjustment to connect instrument signals from guitars, bass, keyboards or synthesisers...
Our Price: $99.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ARX B-DI Blue DI Bluetooth Direct Box
ARX America
Item# ARX-BLUE-DI
The Professional audio interface for Bluetooth enabled SmartPhones, Computers and Tablets Smart Phones and Tablets have rapidly become the audio source of choice for Corporate A.V Presentations, Seminars, System Demonstrations and Testing, Musicians, D.Js and many other audio system users. Designed by the ARX Engineering team to fill the market niche for a wireless Active Direct Box interface, the new Blue DI connects all of today's (and tomorrow's) SmartPhones, Tablets and similar devices,...
Our Price: $220.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PLI04 Media DI Box 2 Channel for PC and Laptop
Palmer Audio
Item# PLM-PLI04
PRO MEDIA DI/ PLI-04. With the new PRO MEDIA DI/ PLI-04, Palmer introduces a DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack...
Our Price: $199.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PAN01 DI Box passive
Palmer Audio
Item# PLM-PAN01
Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Features: Passive DI Box + Thru Output + Attenuable Input Sensitivity Specifications: Product type: DI box Type: passive Channels: 1 Inputs: 2 input connectors: 6.3 mm Jack max. input level: + 62 dBu input impedance: 68 k Ohm(s) input pad: 0 / -30 dB Outputs: 1 THRU outputs/channel: 1 output connectors: XLR, 6.3 mm Jack max....
Our Price: $69.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
DSan LSP-3 Multi-Input Passive Direct Box to Dual XLR Outputs for Computers - 1/8-Inch and 1/4-Inch Stereo TRS / RCA
DSan Corporation
Item# DSA-LSP-3
The D San LSP-3 is a passive direct box; you may think of it as an "extension cord" for your crowded audio mixer. It provides 1/8" and 1/4" stereo TRS jacks to accept headphone-level computer or instrument audio with loop out RCA phono; 1/4" TRS mono jacks to accept low-level signals from instruments or media players; and an 1/8" stereo plug to capture headphone audio from computers, cell phones or media players. There is volume control, and a selector switch for L, R or L+R combined...
Our Price: $75.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial PZ-DI Piezo-Optimized Direct Box
Radial Engineering
Item# RAD-PZ-DI
The Radial PZ-DI is a unique direct box that is specifically designed for acoustic and orchestral instruments. Unlike most direct boxes that are limited to a 'one size fits all' design, the PZ-DI lets you properly match the input impedance to the source to optimize the frequency response, dynamics and feel so that no matter what type of pickup you employ, you will enjoy smoother, more musically pleasing results. The design begins with a 3-position load adjustment switch: The 1 meg-ohm position...
Our Price: $279.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
WHIRLWIND Direct 2 Direct Box
Whirlwind
Item# DIRECT-2
1/4" parallel wired in/out jacks / Ground Lift switch to help eliminate hum and buzz / -20dB pad switch for connection to input signals The DIRECT2 combines features found on two of Whirlwind's DIRECTOR direct boxes into one unit. Perfect for converting unbalanced signals from Stereo keyboards, acoustic Guitar preamps, CD and tape players, Computer Sound cards, etc. The Input and Output grounds of each section are isolated from each other. This allows the DIRECT2 to be used as if it were two completely...
Our Price: $199.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Whirlwind EDB1 CONNECT Series - Economy Direct Box with Pad & Ground Lift Switch
Whirlwind
Item# EDB1
For your consideration! Whirlwind now offers a high quality, import designed, direct box offering rugged construction while maintaining exceptional sound quality while still flashing a cost effective price tag! Features: 1/4" In and Through jacks XLR output Pad switch for connection to "hot" signal sources Ground Lift switch to help isolate hum and buzz Metal construction and quality transformer Specifications: Input Impedance: 20k Ohms Output Impedance: 150 Ohms Frequency Response: 20Hz-20kHz...
Our Price: $63.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Whirlwind HOTBOX Active Direct Box
Whirlwind
Item# HOTBOX
Whirlwind's top of the line active DI. The Hot Box provides super clean front-end circuitry that delivers frequency response that rivals the priciest direct boxes on the market. With its high impedance input, the Hot Box reveals hidden harmonics from guitars and other instruments. Features include a ground-lift switch and an LED which indicates "ON" status. Operates with two (2) 9 volt batteries (not included) or phantom power. Features: 1/4" parallel wired in/out jacks Ground Lift switch to...
Our Price: $189.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Multi-Director 4-Channel Direct Box
Whirlwind
Item# WW-MD
The Multi-Director offers 4 channels that convert line, instrument, or speaker levels to a low impedance mic level. Each channel provides a 20dB pad switch and a ground lift switch as well. Hi-Z bridging inputs with three 1/4" jacks for easy patching. 1 Rack Space.
Our Price: $387.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Switchcraft SC800 Active Instrument Direct Box - Phantom Powered
Switchcraft
Item# SW-SC800A
The Switchcraft SC800A 48V phantom powered instrument direct box is designed to quietly preserve the tone of the world's finest musical instruments. The SC800A is ideal for converting the unbalanced outputs of passive musical instruments such as acoustic guitar and bass to balanced, mic level signals that can be connected to audio consoles and mic preamps. Precision engineered active circuitry provides extended reach and superior audio fidelity for professional audio engineers...
Our Price: $173.60
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Switchcraft SC900CT Instrument Direct Box with Custom Transformer
Switchcraft
Item# SWSC900CT
The 900 Series is a revolutionary new concept in DI technology. For the first time, the ground lift switch can be controlled remotely using +48V phantom power from the console! The unit can be operated in two modes. Manual mode enables users to control the ground lift switch from the DI using the toggle switch. Phantom mode allows users to control the ground lift switch remotely using +48V phantom power from the console. When phantom power is engaged, an LED is illuminated indicating that the ground...
Our Price: $161.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Switchcraft SC702CT Stereo A/V Direct Box
Switchcraft
Item# SW-SC702CT
702 Series Stereo A/V Direct Boxes convert the outputs of equipment such as MP3 players, laptops and DJ mixers to balanced, mic level signals that can be connected to audio consoles, mic preamps and house sound systems. Two fully shielded isolation transformers galvanically isolate input and output connections, creating a pair of ultra-clean audio signals immune from hum and buzz caused by ground loops and RF interference. Features: Specifications:
Our Price: $194.25
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Radial Engineering Reamp JCR Passive John Cuniberti Studio Reamper with Level Control & Filter
Radial Engineering
Item# RAD-REAMP-JCR
The Radial Engineering Reamp JCR is a high-performance passive Reamper that gives you the ability to take a pre-recorded track and send it through a guitar amp or pedal chain, allowing you to explore new sonic textures and experiment with microphone placement, amp and pedal settings without limit. The JCR utilizes the original Reamp circuit designed by recording industry legend John Cuniberti, providing exceptional audio quality that preserves every detail of the original recording while...
Our Price: $249.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARTcessories AVDirect Multi-Input Audio/Video Direct Box
ART
Item# ART-AVDIRECT
The AV Direct from ART is a multi-purpose tool that allows you to plug in virtually any sound source to an XLR input. The AV Direct is the ideal input solution for any application where stereo iPods, Laptop computers, consumer DVD players, consumer HiFi equipment, or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs)...
Our Price: $85.99
Availability: In Stock
Add to Wish List
ART Dual Direct Box
ART
Item# ART-DPDB
The new dPDBT Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. The dPDBT features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k ohm Instrument...
Our Price: $65.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ART DUALXDirect Dual Professional Active Direct Box
ART
Item# ART-DUALXDIRECT
The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a...
Our Price: $75.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ART PDB - Passive Direct Box
ART
Item# ART-PDB
The PDB Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. The PDB also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. Specifications: Input Attenuation -- Switchable (0 dB, -20dB, -40dB) Instrument Input -- 50k Ohm Parallel Link Jack --...
Our Price: $45.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ART PDB4 Four Channel Passive Direct Box - 1RU
ART
Item# ART-PDB4
The ART PDB4 Four Channel Passive Direct Box is a deceptively simple, yet surprisingly useful addition to any serious collection of audio equipment. The PDB4 is a four channel passive direct box that features four quality, fully transformer isolated, direct boxes in a 1U 19-inch rack mount chassis. Inputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops. It is a rock solid, roadworthy...
Our Price: $115.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ART X Direct - Professional Active Direct Box
ART
Item# ART-XDIRECT
The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives...
Our Price: $65.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Klark Teknik KTMADI - MADI Network Module with up to 64 Bidirectional Channels
Klark Teknik
Item# KT-MADI
The KT-MADI network module provides MADI compatibility for the KLARK TEKNIK DN9650 and DN9652 Network Bridges, and features up to 64 or 32 bidirectional channels at 48 kHz or 96 kHz respectively. KT-MADI offers high performance point-to-point links over both industry standard optical fibre and coaxial copper connections, and is ideally suited to interface with third party recording and playback equipment. Features: MADI (AES10-compliant) network module with up to 64...
Our Price: $459.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Radial SB-1 Compact Active DI For Acoustic Guitar & Bass 48V Phantom Powered
Radial Engineering
Item# RAD-SB-1
The Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don't let the small size deter... this ultra-compact StageBug sounds absolutely terrific! The design begins with standard 1/4" instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility...
Our Price: $89.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Switchcraft 314DI Audio Stix Instrument Passive Direct Box
Switchcraft
Item# SW-314DI
An addition has been added to the popular AudioStix line of premium pro audio products. The 314DI is a pocket size version of Switchcraft's standard high quality DI Box series of products. Converts the unbalanced outputs of guitars, keyboards and other instruments with line-out level to balanced, mic level signals that can be connected to audio consoles and mic preamps. Features: ¼" Feed Thru - allows for connection to multiple devices such as an amp and a tuner; two amps and much more. Switchcraft...
Our Price: $115.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial TRIM-TWO Trim-Two Stereo DI with Volume Control
Radial Engineering
Item# RAD-TRIM-TWO
The Radial Trim-Two is a passive direct box, designed for use with laptop computers and other consumer devices where the user has a requirement for a 'ready access' volume control for quick adjustments on stage. The design begins with a choice of inputs including dual 1/4" jacks, left and right RCAs and a stereo 3.5mm input. These are wired in parallel to allow the signal to be split off to feed an alternate signal path such as monitors. Inside, two great sounding Eclipse transformers do the...
Our Price: $199.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
PreSonus TubePre V2 Tube Preamplifier/DI Box
PreSonus
Item# PRE-TUBEPREV2
At PreSonus, we've been designing preamps for a long time, and we always focus on audio quality first. So when we decided to upgrade our popular TubePre V2, we focused on improving an already high-quality sound-without jacking up the price. Like the original TubePre, the new version is a fully professional tube preamp, with a dual-servo (no capacitors) gain stage that lets you boost the program signal to smoking hot levels without significantly increasing the background noise. Discrete components...
Our Price: $159.99
Availability: In Stock
Add to Wish List
BSS Audio AR-133 Active DI Box
BSS Audio
Item# BSS-AR133
Signals from electronic instruments such as guitars, keyboards and similar sound sources generally have a low level, high impedance output, which will not interface with the low impedance balanced input found on professional sound mixing consoles. Furthermore these signals cannot be driven up long cable lengths without serious loss of level and degradation. The BSS Audio AR-133 DI box converts this signal to a more suitable form without interfering with or modifying the signal at the instrument...
Our Price: $185.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
DBX DB10 Passive Direct Box
DBX Professional Products
Item# DBX-DB10
2 Power Options Available
The dbx db10 Passive Direct Box utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry to preserve the sonic integrity and true characteristics of the signal source. It includes a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound. As a professional, you...
Read More
Our Price: $115.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Switchcraft SC700CT A/V Direct Box
Switchcraft
Item# SW-SC700CT
The SC700CT A/V Direct Box from Switchcraft is ideal for connecting the outputs of MP3 players, PC's, laptops, CD players and other audio devices to audio consoles, mic preamps, effects processors, house sound systems and other equipment with 3-pin XLR inputs. The SC700CT converts the outputs of high impedance stereo or mono line level audio devices and musical instruments to low impedance, balanced and isolated mic level signals. All stereo inputs on the SC700CT are summed to mono and output...
Our Price: $140.69
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PAN04 DI Box 2-channel passive
Palmer Audio
Item# PLM-PAN04
The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Features: 2 Channel Passive DI Box + Jack input with parallel THRU + Can handle line and speaker level signals...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MCD2 Pro Professional Stereo Computer/DJ Direct Box (Shielded Transformer) with 1/4 Inch RCA And 3.5mm
Samson Technologies
Item# SAM-MCD2-PRO
Samson's MCD2 Pro Stereo Passive PC Direct Box is the ideal solution for connecting unbalanced line level signals from laptops, CD/MP3 players, and DJ mixers to professional, balanced equipment. Durable, roadworthy construction and two Mu-metal shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications. The MCD2 Pro features two of Samson's STLX Mu-Metal shielded transformers that deliver an extended, flat frequency...
Our Price: $129.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MD1 Passive Mono Direct Box
Samson Technologies
Item# SAM-MD1
Samson's MD1 Mono Passive Direct Box combines premium sound circuitry with durable, roadworthy construction, providing high-quality signal connection solutions for a variety of live sound and recording applications. The MD1 allows clean, balanced lines to be sent from an unbalanced line or instrument signal to a microphone level balanced input. The MD1 features Samson's STL transformer that delivers an extended, flat frequency response with ultra-low distortion. The MD1's balanced output...
Our Price: $49.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MD1 Pro Professional Mono Passive Direct Box (Shielded Transformer)
Samson Technologies
Item# SAM-MD1-PRO
The Samson MD1 Pro Mono Passive Direct Box combines premium sound circuitry with durable, roadworthy construction, providing high-quality solutions for line, instrument and speaker level signals. The MD1 Pro allows balanced lines to be sent from your instrument long distances without inducing noise. The MD1 Pro features Samson's STLX Mu-Metal shielded transformer that delivers an extended, flat frequency response with ultra-low distortion and superior protection against hum and...
Our Price: $69.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MD2 Pro Professional Stereo Passive Direct Box (Shielded Transformer)
Samson Technologies
Item# SAM-MD2-PRO
Samson's MD2 Pro Stereo Passive Direct Box combines two premium direct boxes in a single case. Rugged, roadworthy construction and two shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications. The MD2 Pro is perfect for converting unbalanced stereo line level or instrument signals from keyboards, electronic drum kits, acoustic-electric guitars and more. The MD2 Pro features two of Samson's STLX Mu-Metal shielded...
Our Price: $99.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MDA1 Active Mono Direct Box
Samson Technologies
Item# SAM-MDA1
Samson's MDA1 Mono Active Direct Box combines premium sound circuitry with durable, roadworthy construction, providing high-quality signal connection solutions for live sound and recording studio applications. The MDA1 operates on either batteries or phantom power and allows clean, balanced lines to be sent from your guitars and basses. The active MDA1 provides an even frequency response on any audio signal you connect to regardless of its output impedance. As such, the MDA1 is...
Our Price: $49.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Samson MLI1 Mono Passive Isolation Box
Samson Technologies
Item# SAM-MLI1
The Samson MLI1 is a line level passive isolation box designed to remove hum and buzz caused by ground loops, as well as to convert unbalanced signals to balanced signals for long cable runs. Combining premium sound circuitry with durable, roadworthy construction, the MLI1 provides high-quality signal connection solutions for live, broadcast and studio applications. The MLI1 features Samson's STL transformer that delivers an extended, ruler flat frequency response from 10Hz-35kHz...
Our Price: $39.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Engineering DiNet DAN-TX2 Dante Network Transmitter - Stereo Line level XLR/TRS Inputs with Level Controls
Radial Engineering
Item# RAD-DINETDANTX2
Two Channels of Analog Audio over Dante The Radial Engineering DAN-TX2 is a 2-Channel analog-to-digital converter that allows you to connect any line level source to a Dante or AES67-compliant network. Seamless network integration The DiNET DAN-TX2 makes it easy to transmit two channels of high quality analog audio over a Dante or AES67-compliant network. Multiple input options are provided, with Balanced XLR/TRS connectors for professional audio sources, RCA jacks for...
Our Price: $579.99
Availability: In Stock
Add to Wish List
Radial PRO-ISO Balanced +4dB to -10dB Unbalanced Passive Converter - Voice Range
Radial Engineering
Item# RAD-PRO-ISO
The ProISO is a stereo interface designed to take a high output +4dB line level signal from a mixing console and convert it so that it may be connected to low level unbalanced devices. In effort to adapt to all of the variables, the output may be adjusted with a recessed `set & forget' level control. This makes it easy to interface professional audio gear with devices such as computer sound cards, iPods or -10dB recorders. To reduce noise problems, the ProISO is equipped with an audio isolation...
Our Price: $199.99
Availability: In Stock
Add to Wish List
Switchcraft 370DI AudioStix Passive A/V DI Box 1/8 Inch Stereo Jack RCA Jacks to Locking Male XLR
Switchcraft
Item# SW-370DI
The 370DI is a durable, pocket size, Direct Box which is a cross between Switchcraft's SC700CT DI Box and 318 Inline Audio Adapter. The 370DI sums and converts the unbalanced stereo outputs of cell phones, tablets, laptops and consumer gear to a balanced mono line level for connecting to audio consoles and house sound systems. Features: Dual RCA inputs 3.5MM input (1/8" TRS jack) Switchcraft DE Series locking male XLR provides balanced, mono, mic level output Ground Lift Switch 20db pad to...
Our Price: $92.39
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Switchcraft SD104QA 4-Channel Dante Output Direct Box - 1 x Locking RJ45 Input - 4 x XLR 3-Pin Male Line Outputs
Switchcraft
Item# SW-SD104QA
THE DANTE BOX THAT'S BUILT TO LAST Since 1946, Switchcraft products have been known for their durability, and this new Dante box combines that approach with the latest Dante technology. Rugged rubber corners protect the Switchcraft XLRs outside and high quality electronics inside while maintaining a compact and lightweight form factor. Features: Rubber corners protect unit from handling damage Compatible with standard RJ45 connectors or locking-style Rugged and lightweight aluminum...
Our Price: $367.49
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Pro Co CB-1 Passive Direct Box with Ground Lift Switch
Pro Co Sound, Inc.
Item# CB-1
For connection of unbalanced musical instruments and line-level sources to Low-Z balanced microphone input for PA or recording. Not recommended for speaker level use. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switch for ground lift; male XLR type balanced output. Uses CBT-1 transformer (20K/150 Ohms).
Our Price: $87.27
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pro Co Sound DB1 Monoface Series Direct Box
Pro Co Sound, Inc.
Item# DB-1
Professional quality, passive direct box for connection of unbalanced musical instruments, line level sources and guitar amplifier outputs to Low-Z balanced microphone input for PA or recording. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switches for speaker/line-level attenuation; high cut filter and ground lift; male XLR type balanced output. Uses DBT-1 transformer (20K/150 Ohms).
Our Price: $132.12
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pro Co DB2 Passive Two-Channel Stereo Direct Box
Pro Co Sound, Inc.
Item# DB-2
The Pro Co TradeTools DB2 is a passive, two-channel (stereo) direct box that offers clean and reliable performance both on stage and in the studio environment. Like the Pro Co DB1 Direct Box, it can be used for nearly any instrument or signal source, from electric bass, keyboards and drum machines and submixers. The DB2 preserves the "punch" and clarity of the sound that is often lost when mic'ing a speaker, while eliminating the leakage, distortion and coloration. The signal delivered to the...
Our Price: $246.40
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pro Co DB4A 4-Channel Rack Mount Direct Box
Pro Co Sound, Inc.
Item# DB-4A
4-channel professional quality passive direct box for connection of unbalanced musical instruments and line-level sources to low-Z balanced microphone inputs for PA or recording. Each channel features 1 front-panel and 2 rear-panel 1/4" (6.35mm) jacks for input or parallel output, switches for line-level attenuation and ground lift, and front-panel male XLR-type output. Uses Pro Co DBT-1 transformers (20k/150 ohm)
Our Price: $448.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pro Co 2 to 1 Microphone Combiner
Pro Co Sound, Inc.
Item# MC-2
The ProCo TradeTools MC2 Mic Combiner passively combines the signals from two low-impedance microphone (or similar sources) into a single output. It is a handy "band-aid" for situations where the number of microphones required exceeds the number of mixer channels available, but separate equalization and level control for every microphone is not required. In a musical or recording situation, the MC2 can combine mics from sources like dual bass drums, percussion, stereo guitar amps,...

Our Price: $147.83
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pro Co AV1A A/V Interface Box with Line-Level Outputs for Playback Devices
Pro Co Sound, Inc.
Item# PRCO-AV1A
The ProCo TradeTools AV1A Audio-Visual Interface allows the line-level outputs of audio and video playback devices, etc., to be connected to microphone inputs of house or portable P.A. systems for programs in school auditoriums, lecture halls, civic meetings and corporate board rooms. The AV1A provides audio interfacing and isolation with wide response and low distortion. All inputs are parallel and resistively mixed to monaural. 1/4" 3-conductor phone jack, accepts signals from balanced...
Our Price: $145.91
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Proco IGATE Audio Gateway
Pro Co Sound, Inc.
Item# PRCO-IGATE
The Pro Co iGate Audio Gateway is a device that provides simple and reliable connection of three different audio sources to the balanced microphone inputs of audio mixing consoles. It serves as a mic input, a direct box and an MP3 player interface all together in a conveniently packaged single rack-space unit. The iGate provides a pass-through input for a balanced microphone, inputs for the stereo headphone output of audio devices such as MP3 players, Apple iPods, laptop computers and consumer-type...
Our Price: $478.44
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Rapco DB-1 Passive Direct Box
Rapco
Item# RAPCO-DB-1
The DB-1's simple design offers reliable input jacks as well as a loop-through 1/4 inch jack. Plug any instrument level signal (and some line level) into the box, interface with a standard XLR mic cable into the Lo-Z output, and you're ready to plug the output "directly" into a mixing console. A ground lift switch is provided for buzz-free operation in almost any environment. Features: Transforms Hi-Z 1/4 inch input to balanced Lo-Z XLR output Heavy duty steel box Superior quality connectors and...
Our Price: $40.65
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Rapco STL-1 Stereo Direct Box
Rapco
Item# RPC-STL-1
The multi-mode STL-1 functions as two separate direct boxes in stereo mode. In the mono mode, two high impedance, unbalanced input signals can be combined into one low impedance, isolated balanced output mono signal to conserve channels in a snake. Also in the mono mode, two high impedance unbalanced signals can be combined into one low impedance balanced signal, isolated and split into two separate mono output signals. Comes with two shunts on the input to eliminate feedback. Features: Stereo...
Our Price: $91.53
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Rapco TDI-1 Tape Deck Passive Interface Box
Rapco
Item# RPC-TDI-1
Accepts audio signal from any stereo tape deck, CD player, VCR, or DVD player via RCA inputs. The signal is then isolated and combined into a single low-impedance balanced XLR output for use with mixing consoles. Separate volume controls for Left and right channels are great for split-track backing tapes. The unit is housed in a rugged steel box that provides additional protection from electro-magnetic interference. Features: Accepts audio signal from any stereo tape deck, CD player, VCR,...
Our Price: $121.37
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial Engineering DiNet DAN-RX2 Dante Network Receiver - Ethercon Input with Stereo XLR Analog Outputs
Radial Engineering
Item# RAD-DINETDANRX2
Dual Output Dante Endpoint The DAN-RX2 is a 2-channel 24bit/96kHz digital to analog endpoint that allows you to output audio from a Dante or AES67-compliant network for connection to professional audio systems. Robust digital audio distribution The DAN-RX2 is a road-worthy digital receiver capable of delivering two channels of analog audio to any location from a Dante or AES-67 compliant network. Balanced XLR outputs include a ground lift and a separate headphone amp with...
Our Price: $579.99
Availability: In Stock
Add to Wish List
Radial Engineering JDI Duplex Mk4 Stereo Direct Box
Radial Engineering
Item# RAD-DUPLEXMK4
The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality. Like the Radial JDI, the Duplex employs two high-performance Jensen audio transformers with the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling...
Our Price: $459.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Palmer Audio PAN03PASS 19 Inch DI Box 4-channel passive
Palmer Audio
Item# PLM-PAN03PASS
Passive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR output is additionally present as a parallel socket on the rear panel. Features: 4 channel Passive DI Box + 19" Rack Mount Chassis + Front panel access...
Our Price: $229.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Mackie MDB-USB Stereo Direct Box
Mackie
Item# MCK-MDB-USB
Ready For Anything From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. With the bus-powered MDB-USB Stereo DI, the days of relying on your headphone jack to get audio from a computer into analog gear are over. Combining a high-resolution audio interface...
Our Price: $169.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Mackie MDB-1P Passive Direct Box
Mackie
Item# MCK-MDB-1P
Ready For Anything From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. An essential tool for every musician and engineer, the MDB-1P Passice DI has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal...
Our Price: $69.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
On Stage Stands DB100 Consumer to Pro DI - Laptop DI Box - 3.5 mm Plug to Mic-Level XLR Output
On-Stage Stands
Item# OSS-DB100
The DB100 Laptop DI Box eliminates noise and ground loops that often occur when using consumer audio devices with a PA system. Simply connect its 3.5 mm plug to the headphone jack of a laptop or digital music player, and this compact DI automatically converts the audio signal to a balanced, mic-level XLR output suitable for use with high-powered amplifiers. The volume knob enables additional adjustment of the output level while the ground-lift switch provides control over hum caused by ground...
Our Price: $54.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
On Stage Stands DB2050 Active Stereo Multi-Media DI Box
On-Stage Stands
Item# OSS-DB2050
The On Stage DB2050 Active Multi-Media Direct Box transforms any line level stereo source into a low-impedance (XLR) signal ready to be sent long distances to a mixing board or recording console. Its active design features isolated inputs, a 15dB pad switch, ground lift switch, and polarity switch. Stereo 1/4", 3.5mm, and RCA inputs make it perfect for computers, mp3 players, keyboards, projectors, and DJ equipment. Features: Transforms any line level stereo source into a low-impedance...
Our Price: $119.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial J-ISO Balanced 4dB to -10dB Unbalanced Passive Stereo Converter - Full Range
Radial Engineering
Item# RAD-J-ISO
Stereo +4dB to -10dB converter and isolator The Radial J-Iso™ is a stereo line isolator designed to convert a professional +4dB line level balanced signal to an unbalanced -10dB consumer level device. This enables you to take the balanced output of a mixer and feed a consumer level recorder or audio input on a computer. Exceptional signal handling The passive design begins with 100% discrete components throughout. A set & forget level control lets you attenuate the...
Our Price: $329.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial - ProRMP Re-Amping Box
Radial Engineering
Item# RAD-PRORMP
For years, Reamping has been the 'secret weapon' for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums and even voice as a means to bring creative new tones and sonic signatures to their music. Reamping has many benefits. You start by recording a clean track and concentrate on capturing the best musical performance. Once the magic has been captured, send the clean track back to the amps...
Our Price: $129.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Whirlwind PodDI Single Output Summing Direct Box
Whirlwind
Item# WW-PODDI
The podDI is a single output summing direct box. Use it to connect CD and MP3 players, computer sound card outputs, DJ mixers, etc. to professional equipment with balanced inputs such as a mixing console. Accepts stereo inputs and sums them into a single mono output. A variable attenuator on each input allows level matching between left and right inputs. This makes the podDI a passive mixer in split track audio applications, balancing the voice track and the music track levels in the summed mono...
Our Price: $136.00
Availability: In Stock
Add to Wish List
Radial JD7 Injector Signal Distribution Amplifier
Radial Engineering
Item# RAD-JD7
The Radial JD7 Injector is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time and do so without the noise that often plagues most systems. It features A or B selectable inputs with Radial's award winning class-A buffering circuit for ultra low distortion. To ensure maximum signal fidelity, Drag ControlT load correction lets you replicate the load on the guitar pickup as if connected to a tube amplifier for the most natural tone. The hi-Z...
Our Price: $1,359.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial - SGI Studio Guitar Interface System
Radial Engineering
Item# RAD-SGI
The Radial SGI is a high performance line driver that takes an unbalanced guitar signal and allows you to drive it as far as 100 meters (300ft) without noise. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers. The SGI consists of two boxes: the SGI-TX transmitter...
Our Price: $329.99
Availability: In Stock
Add to Wish List
Palmer Audio PAN03 19 Inch DI Box 4-channel active
Palmer Audio
Item# PLM-PAN03
Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to...
Our Price: $379.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Whirlwind Director Direct Box
Whirlwind
Item# RMTB
The Whirlwind Director DI box is built like a tank and converts line, instruments, or speaker level signals to a clean low impedance mic level. The Director Direct Box offers a ground lift switch, switchable 30dB pad and a switchable low pass roll off filter. Hi-Z bridging input.
Our Price: $111.00
Availability: In Stock
Add to Wish List
Rupert Neve Designs RNDI Active Transformer Direct Interface
Rupert Neve Designs
Item# RUP-RNDI
The RNDI's signature sound is the product of new custom Rupert Neve-designed transformers and class-A biased, discrete FET amplifiers. The carefully orchestrated union of these two elements is key to the RNDI's unique response, delivering a powerful and vibrant direct sound capable of reproducing the full harmonic depth of basses, guitars, acoustic instruments, and professional line level sources. With portable, powerful, larger-than-life tone for your instrument and amplifier signals, the...
Our Price: $299.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Radial JPC Stereo PC-AV Direct Box
Radial Engineering
Item# RAD-JPC
No one builds a stereo direct box like The Radial JPC. This Stereo PC-AV Direct Box has been specifically designed for use with sound cards and other consumer electronic products to allow these to be connected to a professional sound system. Its unique design combines the advantages of transformer-isolated inputs with an active drive circuit, giving you the `best of both worlds' in a compact and extremely flexible and road worthy package. The Radial JPC was designed to help solve the buzz and...
Our Price: $249.99
Availability: In Stock
Add to Wish List
Rolls DB14b AV Presenter Stereo Patch Box
Rolls Corporation
Item# DB14B
The Rolls DB14b is a special purpose direct box for applications where a stereo source signal can be separated, and individual volume controls used for each track such as an AV presentation from a laptop computer, or a rehearsing choir to a music track. It has stereo RCA and 1/8" inputs, 2 volume controls, RCA and XLR outputs, and uses no power. Features: Splits Stereo RCA and stereo 1/8" (3.5mm) signals Individual Right and Left level controls Transformer balanced XLR mono...
Our Price: $59.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Direct Boxes from Markertek are available in single & multichannel configurations and are engineered to precision specifications. Match balanced and unbalanced audio signals (match computers, instruments, film projectors and phonographs to professional audio components), mic to line level and vice-versa. We stock direct boxes from leading manufacturers like Whirlwind, Radial Engineering, ARX America and ART.

Sign In

Narrow Products

By Brand

By Price Range

Filter By