RF & CATV Combiners

The RF Venue COMBINE8 IEM combiner brings together up to eight in-ear monitor transmitter signals into a single rear panel mounted antenna connector. Any brand IEM set to transmit 50 mW or less may be used, as well as any type of directional antenna. It also provides DC power to up to 8 IEM transmitters with an external power supply, removing the need for wall warts. IEM transmitter combination is important for multi-channel systems to minimize intermodulation artifacts arising from...

The HPC-8 is a Headend Passive Combiner, 8 Port, 5-1000 MHz, Low Loss, RFI Shielded HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel...

The HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting...

HPC series consists of 5-1000 MHz passive RF combiners designed for use in a headend to combine the output of up to 32 single-channel devices such as modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port models. All HPC models feature a compact design, high isolation between ports, low net combining loss, and RFI shielding for minimized egress/ingress interference. A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting...

They are a simple plug and play device that can be installed in minutes. This Thor H-SP-1X4 4-way splitter supports frequencies from 5 to 1000 MHz. Use this 4-way coaxial cable splitter for any residential or commercial cable installation. 4-Way Coax Splitter - 5 to 1000 Mhz Coax splitters are used to split a CATV signal so that it can be used for more than one device. They are a simple plug and play device that can be installed in minutes. This 4-way splitter supports frequencies...