Attero Tech unDX4I-B 4x2 Ch 2 Gang US Wallplate 4 Mic/Line In (XLR) - Phoenix I/O - PoE - White & Black - Biamp Control

ITEM #: ATEC-UNDX4I-B MFG #: UNDX4I-B

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNDX4I-B

UNDX4I-B - Overview

The Attero Tech unDX4I Dante™ Audio Interface is a cost effective multi-IO wall box. The unDX4I features four balanced mic/line XLR inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX4I's size and I/O density make it easy to put Dante™ connectivity wherever it's needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.

  • Features:

    • 4 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain
    • 2 side mounted line level balanced analog outputs on depluggable connectors
    • Input gain and +48V phantom power controllable via software over the network
    • Powered by IEEE 802.3af PoE
    • Black and white inserts and Decora plates included
     

  • Specifications:

      Audio Inputs
    • Input Type: Four Balanced and RF filtered inputs on XLR
    • Gain: -18dB, -3dB, +25dB and +40dB, software selectable
    • Input Impedance: >1.8K Ohms at any gain
    • Maximum Input Levels
      • +20dBu @ -18dB gain,
      +6dBu @ - 3 dB gain,
      -23dBu @ +25dB gain
      -38dBu @ +40dB gain
    • Phantom Power: +48V, software selectable

      Audio Input Performance
    • EIN: -115dBu
    • THD+N: <0.02% @ 1kHz for all gain settings, input signal 3dB below maximum
    • Frequency Response
      • 20Hz - 20kHz, +/- 1dB (-18 and - 3 dB gain)
      50Hz - 20kHz +/- 1dB (+25dB and +40dB gain)

      Audio Outputs
    • Output Type: Two balanced line level with automatic muting on loss of Dante signal on 3-pin Depluggable Phoenix
    • Attenuation: Range Software controlled volume (0 to -60dB, 1dB increments)
    • Output Impedance: 200 Ohms balanced
    • Maximum Output Levels: +20dBu at 0dB attenuation

      Audio Output Performance
    • Dynamic Range: 100 dB
    • THD+N: <0.01% @ 1kHz, input signal 3dB below maximum
    • Frequency Response
      • 20Hz - 20kHz, +/- 1dB (-18dB and - 3dB gain)
      50Hz - 20kHz +/- 1dB (+25 and +40 dB gain)

      Dante Network
    • Physical Level: Standard Ethernet
    • Connector: Single RJ-45
    • Cable Quality: CAT-5e or better
    • Transmission Speed: 100 Mbps
    • Supported Sample Rates: 44.1kHz, 48kHz
    • Minimum Dante Network Latency: 1ms

      Power Requirements
    • PoE 802.3af PoE PD compliant
    • Power Consumption: 6.5W Max
    • Cable Quality: CAT-5e or better

      Physical Dimensions
    • Width: 3.54"
    • Height: 4.2"
    • Depth: 2"
    • Weight: 1.7lbs

      Product Compliance
    • FCC CFR 47 Parts 15B, ICES-003, CE (EN55022), RoHS, REACH
     

  • Warranty:

    • 5 Year
     

Required Accessories

UNDX4I-B - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov