Pliant Technologies TMP-R224 Tempest 2.4GHz 2 channel wireless BeltStation - Li-ion Battery Included

ITEM #: COA-TMP-R224 MFG #: TMP-R224

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the COA-TMP-R224

TMP-R224 - Overview

The Tempest2400 2-channel wireless BeltStation operates in conjunction with the Tempest2400 BaseStations. Each Talk button has individual LED indicators. The Talk button can be latching or momentary. The Call button sends a 2-wire compatible call signal to
any wireless BeltStation and any hardwired intercom device on the intercom channel. BeltStations are provided with a rechargeable Lithium Polymer battery capable of nine hours of operation or can be powered by three Standard AA Alkaline batteries. Each BeltStation has its own back-lit display and menu functions, which allow settings to be changed locally at the BeltStation.

Technology:
Each BeltStation user may simultaneously Talk/Listen on A and B or toggle between A and B in "Single Listen" mode. Volume is set by rotating the CH A or CH B rotary control. There are two Talk buttons on each BeltStation, one for each channel. The Talk button enables the microphone signal for the assigned intercom.

Audio:
Each full-duplex BeltStation establishes a unique audio path (point-to-point) with the associated 2- or 4-channel BaseStation delivering an
individualized mix minus signal to other BeltStations in the system. Therefore, each BeltStation can monitor a unique mix of intercom channels and other audio sources.

Durabilty:
The 2-channel BeltStations are made of a weather-resistant ABS co-polymer blend with a high performance polyurethane over-mold.

Seamless Roaming:
Tempest2400 Seamless Roaming is the ability for Tempest2400 BeltStations to move freely from one BaseStation to another without any intervention from the end user. This allows the implementation of a Tempest wireless intercom system that can cover large areas with multiple zones or areas in a facility that would not be adequately supported by a single antenna installation. A BeltStation can roam between as many as 16 different BaseStations (coverage areas or zones).

PLEASE NOTE: This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.

  • Features:

    • 2-Channel, full-duplex BeltStation
    • 2.4GHz, license free operation
    • Dual Talk/Listen operation
    • Backlit LCD screen shows battery life, RF signal strength and more
    • Stage Announce output with relay closure
    • Lithium-Polymer rechargeable battery (or 3 Alkaline AA batteries)
    • Weather resistant enclosure
     
  • Specifications:

    • SYSTEM SPECIFICATIONS
    • RF Frequency 2400 to 2480 MHz
    • RF Scheme FHSS with TDMA
    • Effective Radiated Power 100mW using 2dBi antenna
    • Receiver Sensitivity -93 dBm for 10-5 BER
    • Radio Certification FCC Part 15.247, ETS 300 328 v1.8.1 rules (apply to model numbers ending in “EU” only**), Canadian RSS-210, license free.
    • Transmission Range 1,000 ft. (304.8 m) under ideal conditions. 500 ft. to 900 ft. (152.4 m to 274.3 m) typical
    • Audio Dynamic Range >94 dB
    • Audio Frequency Response 300Hz-3.8KHz with proprietary audio voice shaping
    • System Latency Less than 50 ms direct
    • RoHS Compliant Yes

    • BELTSTATION SPECIFICATIONS
    • Intercom Audio Channels 2
    • Simultaneous Listen Paths True Dual Listen
    • Headset Connector 4-pin male XLR
    • Microphone Type Dynamic or Electret, auto-selected
    • LCD Display 102 × 80 pixels
    • Antenna Internal +2 dBi patch
    • USB BeltStation Power Supply Input 100-240 V, 0.3 A, 50-60 Hz; Output 5 V, 1.25 A
    • Battery Life, Rechargeable Up to 9 hours
    • Battery Charge Time, Lithium Polymer Battery Under 3 hours
    • Optional Power 3 Standard AA alkaline cells
    • Battery Life, Alkaline Batteries Approximately 4 Hours
    • Dimensions H 6.1 in. × W 4.0 in. × D 1.75 in. (156 mm × 102 mm × 44.5 mm)
    • Weight (with Lithium-Polymer Battery) 14.3 oz. (1.17 kg)
    • Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity
     
  • Item Includes:

    • Multi-blade Charger, Tempest CD, USB Cable, Pairing Cable, Battery, Quickstart Guide
     
  • Warranty:

    • Two Year Parts and Labor
     

TMP-R224 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov