Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST

Free Shipping Promo Box

FREE SHIPPING No Minimum Order!

SHOP MARKERTEK EVERYDAY for all of your needs. Free shipping on almost every order placed on our website.
Special order & oversized freight intensive items ship at an additional cost. Continental US orders only.

Fast Economical International Shipping
Markertek makes it EASY for our international customers to get their orders!

At check-out you can view our very affordable international shipping rates that are ALL-INCLUSIVE with your GUARANTEED LANDED COST and NO SURPRISE FEES!

*Economy International Shipping delivery time is approximately 7-14 days. Economy International Shipping is available to select countries. Not all products are eligible.

Secure LoginClose X

Returning Markertek Customers

New Markertek Customers

Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

Crown CTS CTS8200AUSPCN Power Amplifier with DSP
  • Crown CTS CTS8200AUSPCN Power Amplifier with DSP
  • Crown CTS CTS8200AUSPCN Power Amplifier with DSP
  • Crown CTS CTS8200AUSPCN Power Amplifier with DSP
  • Crown CTS CTS8200AUSPCN Power Amplifier with DSP

Crown CTS CTS8200AUSPCN Power Amplifier with DSP

Manufacturer: Crown International

Item #: CTS8200AUSPCN   •   MFG #: CTS8200AUSPCN


This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.



Item unavailable. Please select another option.

Items similar to the CTS8200AUSPCN


The power amplifier shall be a solid-state eight-channel model employing Multi-Moder (AB+B) output circuitry.
The amplifier shall contain a 3rd generation DSP-based PIPT (Programmable Input Processor) module, which shall connect the amplifier to a 100 Mbps Ethernet network, allowing it to be remotely controlled and monitored via System ArchitectT software. In addition, the input module shall allow the transport of real-time digital audio via CobraNetT over the same Ethernet network.
The input module's processors shall provide digital signal processing. Audio routing, faders, meters, polarity & mute, input compressors, filters, delays, multimode output limiters, error reporting, and load monitoring shall be available. A built in noise generator and sine-wave generator provide noise shall provide masking and test capabilities. The enhanced AUX port capability shall allow the user to interface with the amplifier to provide external manual control and monitoring.
This amplifier shall require Harman Pro System Architect software, available from www.crownaudio/forums

  • Features

    • The Input Module shall meet the following specifications:AUX Connector: Configurable for AUX input, AUX output and Listen Bus.
    • Listen Bus is also supported through CobraNet.
    • Network Connector: The dual RJ45 CobraNet connectors allow a Primary & Secondary connection to the 100Mb Ethernet network. Should the Primary
    • connection lose link activity with the network, the input module will automatically switch to the Secondary connection to ensure uninterrupted audio and
    • control. The indicators on the RJ45 connectors display network information concerning the Ethernet and CobraNet connections. Preset Indicator: Signals the number of the current preset, if active, by flashing
    • a series of flashes equal to the current preset number. IQ Data Indicator: Flashes when the module receives a valid command that is addressed to the CTs 4200 USP/CN and CTs 8200USP/CN. Reset/Preset Switch: Used to change presets, restore settings to factory default or restore all the presets to the factory defaults. During operations of the switch, the Data indicator
    • fl ashes as an aid to the user. Accessible with a straightened paper clip through the rear panel, selects the next user preset if pressed for less than
    • 2 seconds, resets the module to preset "0" if pressed for more than 2 seconds.
    • Memory Backup: Non-volatile FLASH memories for backup of run-time parameters, presets, and program storage. Communications: 100Mb Fast Ethernet conforming to IEEE 802.3.
    • Overall Audio Performance: DSP Processing: Two processors, 32 bit, Floating Point, 724 s latency. D/A and A/D Conversion: 24 bit. Latency: DSP processing: 1 ms or 1000 s, Analog-to-digital conversion: 250 s,
    • Digital to analog conversion: 250 s, Amplifier: 100 s, Total: 1.6 ms or 1000 s. Range: 103 dB typical (A-weighted, 20Hz-20kHz, audio sourced from
    • muted CobraNet channel) Distortion: < 0.1% THD+N, 20Hz-20kHz. Frequency
    • Response: ± 0.5 dB, 20Hz-20kHz. Input/Output Monitor Accuracy: Typically ±1dB. Maximum Input Level: + 20 dBu. The amplifier shall be designated the Crown CTs 8200 USP/CN.
  • Specifications

    • The power amplifier shall meet or exceed the following performance criteria.
    • Input sensitivity for rated output: 1.4 V. Rated output with eight channels
    • driven in Dual mode with 0.1% THD (20 Hz to 20 kHz): 175 watts per
    • channel into 4 ohms; 155 watts per channel into 8 ohms, and 185 watts
    • per channel (70V). Rated output in Bridge-Mono mode with four channel
    • pairs driven at 0.1% THD (20 Hz to 20 kHz): 350 watts per channel pair
    • into 8 ohms; 310 watts per channel pair into 16 ohms, and 185 watts per
    • channel pair (100V). Signal to Noise Ratio below rated power (20 Hz to 20
    • kHz): 100 dB unweighted. Phase Response: ±35 degrees from 10 Hz to 20
    • kHz at 1 watt. Frequency Response: 20 Hz to 20 kHz, ±0.5 dB at 1 watt into
    • 8 ohms per channel in Dual mode. Damping Factor: greater than 180 from
    • 10 to 400 Hz. Crosstalk (below rated power, 20 Hz to 1 kHz): greater than
    • 80 dB. Intermodulation Distortion (60 Hz and 7 kHz at 4:1, from 163 milliwatts
    • to full bandwidth power): less than 0.05% typical. Total Harmonic
    • Distortion at 1 watt from 20 Hz to 20 kHz: less than 0.05%. Common Mode
    • Rejection (20 Hz to 1 kHz): greater than 50 dB. DC Output Offset (shorted
    • input): less than 5 mV. Maximum Input Level (before input compression):
    • + 22 dBu rms. Power Draw at Idle (120 VAC mains, all channels in 4/8 ohm
    • mode): 58 watts. Power Draw at Idle (120 VAC mains, all channels in 70V
    • mode): 77 watts.
    • The amplifier chassis shall be constructed of steel with a durable black
    • finish and shall be designed for continuously variable-speed forced-air
    • ventilation from the front panel to the back panel.
    • The dimensions of the amplifi er shall allow for 19 inch (48.3 cm) EIA
    • standard (RS-310-B) rack mounting. The amplifi er shall be 5.25 inches
    • (13.3 cm) tall, and 16.25 inches (41.3 cm) deep behind the rack-mounting
    • surface.
    • The amplifier shall weigh 36 pounds, 6 ounces (16.5 kg).

Add Accessories for your CTS8200AUSPCN: