DPA SMK-SC4060 Stereo Microphone Kit - 2x SC4060 Omnidirectional Mic - 2x Boundary Layer Mount

ITEM #: DPA-SMK-SC4060 MFG #: SMK-SC4060

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the DPA-SMK-SC4060

SMK-SC4060 - Overview

This d:screet™ Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. A complete stereo pair; two handpicked omnidirectional condenser microphones, selected on sensitivity within ±1.5 dB.

It combines two d:screet™ SC4060 Omnidirectional Miniature Microphones, Hi-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with our d:screet™ 4060, 4061, 4062 and 4063 Miniature Microphones to place on a reflective boundary such as a floor, wall, ceiling, piano lid etc. This enables the mics to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air". This solution serves as a kind of acoustical zoom.

There are many accessories included in the kit. One of them is the DMM0007 Universal Surface Mount. This mount allows all kinds of instruments, from acoustic guitar through grand piano and drums, to be mounted in the best-sounding position. The mount uses special non-marking adhesive discs for attachment.

  • Specifications:

    • Directional pattern: Omnidirectional
    • Principle of operation: Pressure
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz - 20 kHz
    • Frequency range, ±2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
    • Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
    • Total harmonic distortion (THD): < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
    • Dynamic range: Typ. 100 dB
    • Max. SPL, peak before clipping: 134 dB
    • Output impedance: 30 - 40Ω
    • Cable drive capability: Up to 300 m (984 ft)
    • Power supply (for full performance): For wireless For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
    • Connector: MicroDot
    • Color: Black, beige, brown or white
    • Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
    • Microphone diameter: 5.4 mm (0.21 in)
    • Microphone length" 12.7 mm (0.5 in)
    • Cable length: 3 m (9.8 ft)
    • Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
    • Temperature range: -40°C to 45°C (-40°F to 113°F)
    • Relative humidity (RH): Up to 90%
    • Sensitivity selection tolerance (at 1 kHz): ±1.5 dB
     
  • Item Includes:

    • 2 x 4060 d:screet Miniature Omnidirectional Microphone, Hi-Sens
    • 2 x Magnet Mount for d:screet Miniature Omnidirectional Microphones
    • 2 x Boundary Layer Mount for d:screet
    • 2 x Microphone Holder for Strings
    • 2 x Adapter for Microdot to 3-Pin XLR Belt Clip
    • 2 x Foam Windscreen for d:screet and d:fine
    • 1 x Universal Surface Mount
     
  • GTIN:

    5713055012830
     

SMK-SC4060 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov