Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST


Secure LoginClose X

Returning Markertek Customers

New Markertek Customers

Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

Earthworks FW730/HC FlexWand Hypercardioid 7 ft model - 30Hz to 30kHz
    Questions? Ask a Markertek Expert:
    800-522-2025 Email

    Earthworks FW730/HC FlexWand Hypercardioid 7 ft model - 30Hz to 30kHz

    Manufacturer: Earthworks, Inc.

    Item #: ETW-FW730-HC   •   MFG #: FW730/HC


    List Price:$1,661.00
    Our Price:$1,329.00

    free ship
    Availability: Usually ships in 3-10 business days
    This item is currently out of stock and will ship the minute we receive it – typically 3-10 business days. Need it sooner? Expedited delivery options may be available. Email [email protected] or call customer service at 800-522-2025 and we'll make it happen.



      7 Foot Hypercardioid FlexWand with cast-iron base
      The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 10 inches from the floor or anywhere in between, depending on the model. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.

      • Features

        • Uniform frequency response on or off axis
        • Frequency response of 30Hz to 30kHz
        • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
        • Large flex section near the center of the stand that couples the stand and the wand
        • Mini-gooseneck between the end of the wand and the microphone head
        • Substantial improvement in gain before feedback
        • They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
        • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand will reject much of the sound of the band or orchestra
        • The near perfect polar response of the FlexWand allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
        • The sturdy 12 pound cast iron base will not allow the FlexWand to be accidentally knocked over
      • Specifications

        • Frequency Response: 30Hz to 30kHz ±2dB at 6 inches (15cm)
        • Polar Pattern: Cardioid or Hypercardioid
        • Sensitivity: 10mV/Pa (-40dBV/Pa)
        • Power Requirements: 48V Phantom, 10mA
        • Max Acoustic Input: 145dB SPL
        • Output: XLR (pin 2+)
        • Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
        • Min Output Load: 600? between pins 2 & 3
        • Noise: 22dB SPL equivalent (A weighted)
        • Positioning Range: From 1.5 ft. to 7 ft. above floor level
        • Gooseneck: Rigid center with nominal 2.5? to 3? flex on both ends
        • Dimensions: Stand 7’2? (2.18m); Base 12? (30.5cm) in diameter, 1.1? (2.7cm) high
        • Weight: .3 lb. (137g)
      • Item Includes

        • SRW3 -Foam Windscreen for FlexWands & SR25
        • LP1530 - LevelPad switchable -15 or -30db
        • FWTCB - Tripod base for all FlexWand models
        • FWCIB - Cast Iron base for all FlexWand models
        • FWEXT-2 Two foot extension
        • FWEXT-3 Three foot extension
      • Warranty

        • 15 Years

      Add Accessories for your FW730/HC:

      Please fill out the information below
      Email Address*