Gefen GEF-UHD-89-HBT2 4K Ultra HD 8x9 Matrix for HDMI w/ HDCP 2.2 HDBaseT and POH

ITEM #: GEF-UHD-89-HBT2 MFG #: GEF-UHD-89-HBT2

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the GEF-UHD-89-HBT2

GEF-UHD-89-HBT2 - Overview

The Gefen 4K Ultra HD 8x9 Matrix for HDMI w/ HDCP 2.2, HDBaseT 2.0, and POH routes eight 4K sources to any combination of nine 4K displays. It features eight HDMI inputs, one HDMI output for local viewing/monitoring, and eight HDBaseT 2.0 outputs. The HDBaseT 2.0 outputs extend AV and controls up to 100m at 4K to eight receivers installed at remote viewing locations. Gefen's implemenation of the new HDBaseT 2.0 Colligo platform ensures an even more robust and resilient connection than the industry standard HDBaseT. Resolutions up to 4K Cinema-DCI (4096 x 2160 at 24 or 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 or 30Hz 4:4:4) are supported. This product is compliant with the latest HDCP 2.2 protocol as well as the legacy HDCP 1.4. The Gefen 8x9 Matrix also supports 1080p Full HD, 1920 x 1200 (WUXGA), 3DTV, and Deep Color (up to 1080p resolution). Multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio are also passed through. HDBaseT extension between the matrix and the eight included receivers supports HDMI, 2-way IR, RS-232, and Ethernet. IR from viewing locations to the sources can be routed independent from video if need be. POH (Power Over HDBaseT) technology provides power to the receiver units and other POH-class-compliant devices, using the same CAT-5 cable that extends the HDMI and control signals. The Gefen Syner-G software's Discovery and Show-Me features simplify initial IP configuration. This matrix can be controlled via front panel buttons, a handheld IR remote, electrical IR, RS-232, Telnet, UDP, and Gefen's intuitive and user-friendly web server interface. An easy-to-read, super-bright OLED front panel display indicates routing status and IP settings. The matrix comes in a rack-mountable enclosure with detachable rack-ears for shelf-top placement. Low profile, surface-mountable Receiver units fit in tight places and accommodate Gefen locking HDMI cables for secure connctions.

  • Features:

    • Routes eight 4K sources to nine displays
    • Supports resolutions up to 4K Cinema-DCI (4096 x 2160 at 24 or 30 Hz), 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 color space),1080p Full HD, and 1920x1200 WUXGA
    • HDCP 2.2 and 1.4 compliant
    • Extends HDMI, Ethernet, RS-232, and 2-way IR up to 100 meters (330 feet)
    • Supports 12-bit Deep Color (up to 1080p Full HD)
    • 3D pass-through
    • Lip Sync pass-through
    • IR from viewing locations to sources can be routed along with or independent from video path
    • Push button front panel controls
    • Advanced EDID Management for rapid integration of sources and displays
    • Pass-through of LPCM 7.1 and HBR (High Bit Rate) audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
    • Supports the use of DVI sources and DVI displays with HDMI-to-DVI adapters (not included)
    • RS-232 Serial interface for use with an automation control system
    • IP control via Telnet, UDP, and the built-in web server interface
    • IR remote control
    • Gefen Syner-G software's Discovery and Show-Me features simplify initial IP configuration
    • Field-updatable firmware via web server interface
    • Can be placed on a shelf or mounted in a standard 19-inch wide rack
     
  • Specifications:

    • Matrix:
    • HDMI Input Connectors: (8) Type A 19-pin female, locking
    • HDMI Output Connector: (1) Type A 19-pin female, locking
    • HDBaseT 2.0 POH Output Connectors: (8) RJ-45
    • RS-232 serial port - control: (1) DB-9, female
    • RS-232 serial ports - extension: (8) 3.5mm mini-stereo jack
    • IR In/Ext Ports - extension: (9) 3.5mm mini-stereo jack
    • IR In/Ext Port - control: (1) 3.5mm mini-stereo jack
    • IR Out Ports - extension: (9) 3.5mm mini-mono jack
    • Ethernet Port - IP Control & extension: (1) RJ-45
    • AC Power Inlet: (1) IEC type
    • IR Extender type: EXT-RMT-EXTIRN (not included)
    • IR Sensor: (1), located on front panel
    • Display: OLED, 2 rows, 20 characters per row
    • Power Button/Indicator: (1) tact-type, bi-color blue/orange backlight
    • Control Buttons/Indicators: (7) tact-type, blue backlight
    • Power Supply: 100V to 240V AC
    • Rack mounting requirements: Standard 19" rack, 2U high
    • Dimensions (excluding rack ears and connectors, W x H x D): 17.25" x 3.5" x 15.75" (440mm x 89mm x 400mm)
    • Net Unit Weight: 22 lbs. (10.0 kg)

    • Receiver:
    • HDMI Output Connector: (1) Type A 19-pin female, locking
    • HDBaseT 2.0 POH Input Connector: (1) RJ-45
    • RS-232 serial port - extension: (1) 3.5mm mini-stereo jack
    • IR In/Ext Port - extension: (1) 3.5mm mini-stereo jack
    • IR Out Port - extension: (1) 3.5mm mini-mono jack
    • Ethernet Port - extension: (1) RJ-45
    • IR Extender type: EXT-RMT-EXTIRN (not included)
    • Dimensions (excluding brackets and connectors, W x H x D): 3.50" x 0.65" x 5.65" (88mm x 16mm x 143mm)
    • Net Unit Weight: 0.6 lbs. (0.25 kg)

    • System:
    • Power Consumption: 175W
    • Operating Temperature: +32 to +122 °F (0 to +50 °C)
    • Operating Humidity: 5% to 90% RH, non-condensing
    • Storage Temperature: -4 to +140 °F (-20 to +60 °C)
    • Storage Humidity: 5% to 95% RH, non-condensing
    • MTBF: 50000 hours
     
  • Item Includes:

    • (1) Matrix
    • (8) Receivers
    • Assorted accessories
     
  • GTIN:

    0888814402001
     

GEF-UHD-89-HBT2 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov