Hall Technologies UV1-S-WP Video over UTP Sender

ITEM #: HRT-UV1-S-WP MFG #: UV1-S-WP

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the HRT-UV1-S-WP

UV1-S-WP - Overview

The UV1-S-WP Mini-Cat® transmits Video and Phantom Power over UTP (Cat5/5e/6) cable up to 500 feet to compatible Receiver (UV1-R or UV1-R-WP). It is constructed as a single gang wall plate with a shallow depth so that it can mount into any size Junction Box. The UV1-S-WP Mini-Cat® supports PC resolutions up to 1920 x 1440 or HDTV resolutions to 1080p. The unit includes a 9 VDC Universal power supply that supplies power to the Receiver via the UTP cable. Made in the USA.

  • Features:

    • Single gang wallplate construction saves space and simplifies installations
    • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
    • Amplifies the signal for clean and crisp transmission
    • Differential signaling eliminates ground loops and noise
    • Sends a VGA or Component Video Signal on Cat5/5e/6 cables to 500 feet
    • Standard RJ45 connector on the rear for easy termination
    • Includes a power supply that connects to the transmitter on screw terminals and can be remotely located using low-voltage wiring.
    • Transmits power to the remote receiver
    • Can be powered from the receiver side over the Cat5 cable (if a power supply is attached to the receiver)
    • Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480p to 1080p.
    • LED for power-good indication (blinks if there is insufficient power voltage)
     

  • GTIN:

    0608415712770
     

Required Accessories

UV1-S-WP - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov