PDMOVIE PD2-M2-A Remote Air 4 Dual Channel Wireless Follow Focus System with Hand Controller

ITEM #: IKAN-PD2-M2-A MFG #: PD2-M2-A

Primary Image
  • Product Image Thumbnail 1 of 4
  • Product Image Thumbnail 2 of 4
  • Product Image Thumbnail 3 of 4
  • Product Image Thumbnail 4 of 4

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the IKAN-PD2-M2-A

PD2-M2-A - Overview

PDMOVIE Remote Air 4 Dual Motor Wireless Lens Control Kit is in the PD Movie family of wireless lens controllers and motors. It includes a single wireless receiving motor two daisy-chainable wired motors, and it comes with a Wi-Fi controller with a 328" range. The system supports 19 channels, so you can find clean communication between controller and motor, even when using multiple motors in a FIZ (focus, iris, zoom) setup.

Included in this kit are a wireless receiver motor and a wired motor. Both motors feature a cine-style drive gear with 0.8 MOD and can drive either focus, iris, or zoom on a lens with cine-style gears. The wireless motor has a built-in wireless antenna and power port, while the wired motor is daisy-chainable with the wireless motor, allowing you to control both motors with a single transmitter. The calibration procedure has been simplified and you can calibrate lenses with or without hard stops. Built-in OLED screens on the motor and handwheel provide clear information on the state of your system. The motor is designed and built in Germany.

  • Features:

    • Wireless focus, zoom and iris control system
    • Includes one wireless focus motor and zoom & iris motors
    • Hand controller is capable of controlling up to three motors
    • Motor is now thinner and lighter than the previous generation
    • 4 times drive resolution than the previous generation
    • New easy motor calibration works on lenses with and without hard stops
    • Motor display shows channel, signal strength, battery life, motor voltage, and Bluetooth connection confirmation in addition to Motor position
    • Brushless motors were designed in and imported from Germany
    • 2.4G wireless technology, a Bluetooth 4.0 module, and full-duplex transmission for distance, control, and accuracy
    • Maximum transmission distance of 100m
    • High-capacity integrated battery gives 30 hours of operation time
    • Adaptable for 3D shooting
     
  • Specifications:

    • Battery
    • Controller:
      Voltage: 3.7 VDC
      Capacity: 2040 mAh
      Motor: 12 to 18 VDC
    • Dimensions
    • Controller:
      Body: Width: 1.91" (4.85cm)
      Thickness: 0.70" (1.78cm)
    • Handwheel:
      Width: 2.43" (6.17cm)
      Thickness: 2.25" (5.72cm)
      Motor: 4.23 x 2.6 x 0.91" (10.74 x 6.6 x 2.31cm)
    • Fixture Weight:
      Controller: 0.63Lbs (0.29kg)
      Motor: With 15 mm Rod Clamp: 0.41" (1.04cm)
      Without 15 mm Rod Clamp: 0.36" (0.91cm)
    • Gearing: MOD: 0.8 Teeth: 40
    • Noise Db: <28 dB
    • Power
    • Charger:
      Input: 100 to 240 VAC, 50/60 Hz, 0.18 A
      Output: 5 VDC, 1.2 A
    • Torque: 0.8 Nm
    • Shipping
      Weight: 3Lbs
      Dimensions: 11 x 8 x 4"
     
  • Item Includes:

    • 1x Focus/Iris/Zoom Controller
    • 1x PD-RX Remote Air Receiver Motor
    • 2x PD-MX Remote Air Slave Motor
    • 2x Slave Motor Cable
    • 1x Bluetooth Controller
    • 1x D-Tap Power Cable
    • 1x USB Charging Cable
    • 1x Micro-USB Charging Cable
    • 3x 15mm/19mm Adapter
    • 2x Glow In The Dark Marking Disk
    • 2x Short Antenna
    • 2x Long Antenna
    • 1x Lanyard
    • 1x Case
     
  • GTIN:

    0847983031450
     

PD2-M2-A - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov