Lectrosonics VRT Receiver Module for the VRM Receiver Master - Block 19

ITEM #: LEC-VRT-19 MFG #: VRT-19

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the LEC-VRT-19

VRT-19 - Overview

Lectrosonics VRS & VRT Modules for Venue Series Receiver Systems!

The Venue Series Receiver Systems are of a modular UHF design that operates with Digital Hybrid Wireless transmitters, and a variety of analog transmitters. Each unit consists of a master host assembly and up to six plug-in receiver modules. The system includes an antenna multi-coupler, computer communications interface and the mechanical rack mounting for the receiver modules.
The VRS standard module has fixed front-end filters that cover its 25.5 MHz tuning range. The higher selectivity VRT module has a much narrower tracking front-end filters that retune as the frequency is changed to stay centered over the selected frequency.
The modules are a triple conversion, frequency synthesized design, controlled by the microprocessor in the host assembly. A common DSP in the host
assembly is used for all six receiver modules to decode the received signals and restore the digital audio. Using a single DSP results in a significant reduction in cost per channel.

The host assembly (Lectrosonics Venue) will handle up to six receiver modules via multi-pin connectors on the side of the main housing. The modules are held in place with snap-in retaining clips. The clips hold the modules firmly but are easy to remove without tools to make needed changes. VRS and VRT receiver modules can be mixed in the same chassis. For ratio diversity operation, both modules in the pair must be on the same frequency block and positioned in the assembly in keeping with the OPTI-BLEND labeling on top of the chassis housing. All modules must be within the frequency passband of the host assembly. Frequency blocks are marked on the receiver module and chassis housings.

Operating Frequencies (MHz) for Receiver Modules:
Block 470: 470.100 - 495.600
Block 19: 486.400 - 511.900
Block 20: 512.000 - 537.500
Block 21: 537.600 - 563.100
Block 22: 563.200 - 588.700
Block 23: 588.800 - 607.900 and 614.100 - 614.300
Block 24: 614.400 - 639.900
Block 25: 640.000 - 665.500
Block 26: 665.600 - 691.100

Please Note! VRT & VRS modules are not compatible with newer Venue2 frames.

VRT-19 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov