Leader LV7300-SER02 Multi SDI Zen Rasterizer option adding SDI Inputs (2) plus Eye Pattern and Jitter

LV7300-SER02 - Overview

LV7300-SER02 - Overview

LV7300-SER02 - Details

• Features:

  • Supports various signal inputs
  • Various SDI signals up to 12 G-SDI can be observed/monitored.
  • Audio signals can correspond to SDI embedded voice.
  • Excellent operability
  • With the front panel equipped with key buttons and knobs that follow the operability of conventional models, operation with a
  • USB mouse is also possible. In addition, the LV5300/LV5350 adopt a 7-inch full HD panel with a touch panel function, and the LV7300 can be operated and set intuitively by touch operation by connecting an external LCD adopted touch panel with a USB cable
  • SDI input format
  • SD-SDI, HD-SDI, 3G-SDI, 12G-SDI Single Link is supported
   

• Specifications:

  • External Synchronize Input Terminal
  • Input Terminal: BNC terminal
  • Number of Input Terminals: 1 line, 2 terminals
  • Input Impedance: 15kΩ Passive loop through
  • Input Return Loss: 30dB or more (50kHz - 30MHz, 75Ω termination)
  • Maximum Input Voltage: ±5V (DC + peak AC)
  • Input Signal: Ternary synchronization signal or NTSC/PAL black burst signal; 10 Field ID correspondence
  • Function: SDI reference signal input for video signal waveform display and phase difference display
    
    Headphone Output Terminal
  • Output Terminal: Standard jack 1 terminal (stereo)
  • Output Signal: On the screen of the displayed audio signal, arbitrary 2 ch (Downmixed Lt, Rt is also acceptable)
    
    SDI Output Terminal
  • Function: Output screen for SDI monitor
  • Output Terminal: BNC terminal
  • Number of Output Terminals: 1
  • Output Signal: Output liquid crystal display screen is output with HD, 3G-A, 3G-B-DL. 1920x1080 60, 59.94, 50 I/P, YCBCR 4:2:2 (10 bits)
    
    TMDS Output Terminal
  • Function: The displayed screen is output for HDMI monitor.
  • Output Terminal: HDMI terminal
  • Number of Output Terminals: 1
  • Signal Format: Single Link T.M.D.S
  • DDC Function: Not supported
  • HOT PLUG Detection Function: Not supported
  • Output Signal: Output liquid crystal display screen is output. 1920x1080 60 P, 59.94 P, 50 P
    
    Control Terminal - USB
  • Terminal Shape: Standard A USB 2.0
  • Number of Terminals: 2
  • Compatible device USB memory, USB mouse, touch panel type monitor
    
    For Ethernet Terminal Control
  • Approved Standard: IEEE802.3
  • Supported Protocols:TELNET, FTP, SNMP, HTTP, SNTP
  • Input/Output Terminals: RJ-45
  • Function: Remote operation with an external PC or remote controller, File transfer, get status information
  • Types: 10Base-T, 100Base-TX, 1000Base-T
    
    Remote Terminal
  • Terminal Shape: D-Sub 15 pins (female)
  • Number of Terminals: 1
  • Control Signal: LV- TTL level (LOW active)
  • Function Preset: Recall, input signal switching, alarm output, tally
  • Alarm Output: When a format alarm, various errors, fan abnormality, or internal temperature occurs
    
    General Specifications
  • Operating Temperature Range: 32°F - 104°F (0°C - 40°C)
  • Operating Humidity Range: 85% RH or less (with no condensation)
  • Performance Guarantee Temperature Range: 50°F - 86°F (10°C - 30°C)
  • Usage Environment: Indoors
  • Usable Altitude: up to 2,000m
  • Overvoltage Category: 1
  • Pollution Degree: 2
  • Power Supply: Voltage DC 10V - 18V
  • Dimensions (HxWxD): 1.7" x 8.3" x 11.8" (43mm x 211mm x 300mm)
   

LV7300-SER02 - Required Accessories

LV7300-SER02 - Recommended Accessories

LV7300-SER02 - Attachments