Shure MX412SE/O 12-Inch Gooseneck Mic with Inline Preamp - Omnidirectional

ITEM #: MX412SE/O MFG #: MX412SE/O

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the MX412SE/O

MX412SE/O - Overview

12-Inch Gooseneck Mic with Inline Preamp - Omnidirectional

Shure MX412SE/O Omnidirectional 12" Gooseneck Microphone with In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen.

Shure MX412 SE Series Microflex Gooseneck microphones are miniature gooseneck-mounted electret condenser microphones designed for superior speech and vocal pickup. Their high sensitivity and broad frequency range make them suitable for recording as well as sound reinforcement.

MX400SE microphones can be screwed onto a mic stand or the supplies 5/8 inch27-threaded flange. They can easily be changed from side-exit to bottom exit to conceal the cable. All models include an inline amplifier and 10 foot cable.

  • Features:

    • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
    • Interchangeable cartridges provide the right polar pattern for every application
    • Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
    • Shock mount provides over 20 dB isolation from surface vibration noise
    • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
    • Snap-fit foam windscreen
    • Supplied shock mount for more than 20 dB isolation from surface transmitted noise
    • Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table
     

  • Specifications:

    • Frequency Response: 50 to 17,000 Hz
    • Impedance: 180 ohms actual (EIA rated at 150 ohms)
    • Phantom power required: 11 to 52 Vdc phantom, 2.0 mA
     

  • Item Includes:

    • 1 - A12B Flange & Nut
    • 1 - 80A476 Clamp
    • 1 - A400SM Shock Mount
    • 1 - RK412WS Snap-fit Foam Windscreen (1 furnished, 4 in replacement kit.)
    • 1- R183B Omni-Directional Cartridge Blk.
     

Required Accessories

MX412SE/O - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov