Neutrik NA2-IO-DPRO Bi-Directional Dante Audio Interface/Breakout Box 2-In 2-Out

ITEM #: NA2-IO-DPRO MFG #: NA2-IO-DPRO

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the NA2-IO-DPRO

NA2-IO-DPRO - Overview

The Neutrik NA2-IO-DPRO is a 2IN, 2OUT breakout box designed to connect legacy audio equipment with a Dante® network. It features high-quality microphone preamps and 2 Dante® ports for either redundant setup or daisy chaining. Audio parameters are adjusted by the DPRO Controller app.

All connectors are lockable and, together with the removable rubber protection, offer a reliable solution for tough stage conditions. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, racks or on a truss.

PLEASE NOTE! Requires a Power over Ethernet switch or a PoE injector (802.3 af/at - class 2 or no classification at 6 W)

  • Features:

    • Lockable audio and network connections
    • Connect up to two analog line or mic signals to a Dante® network
    • Connect AES/EBU signals to a Dante® network and provide an AES/EBU signal from the Dante® network
    • Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
    • Primary and Secondary Dante® ports
    • Audio parameter control via DPRO controller software
    • Different mounting options (rack, floorbox, table mounting)
    • PLEASE NOTE! Requires a Power over Ethernet switch or a PoE injector (802.3 af/at - class 2 or no classification at 6 W)
     
  • Specifications:

    • General Specifications
    • Channel:
      2 Input (Line, Mic, AES/EBU)
      2 Output (Line Level, AES/EBU)
    • Supported Sampling Rates: 44.1 / 48 / 88.2 / 96 kHz
    • Bit Depth: 16, 24 and 32 bit
    • Latency: based on user selection; min. 0,25 ms (Dante®)
    • Ethernet Connection: 1.000 BASE-T (supporting PoE)

      Electrical Data
    • Power Consumption: <6 Watt
    • Power Supply: PoE (Power over Ethernet) switch or PoE midspan power injector (according to IEEE 802.3af/at, class 2 or no classification at 6W)
    • Analog Input:
      Equivalent Input Noise: -128dBu (67dB Gain); A-Weighted
      Gain Hub (3dB Steps): 0 - 67dB
      Max. Input Level: +24dBu (PAD enabled) + 8dBu (PAD disabled)
      Input Impedance: >7.5kΩ balanced
      Frequency Response: 20 Hz to 20 kHz (± 0.5dB)
    • Analog Output:
      Max. Output Level: +24dBu
      Output Impedance: < 50Ω balanced
      Residual Output Noise: -88dBu, A-Weighted
      Frequency Response: 20Hz to 20kHz (±0.5dB)
    • THD+N: < 0.005% (20Hz to 20kHz, +4dBu)
    • Dynamic Range: >112dB, BW 22.4kHz, A-Weighted (Input Gain = min.)
    • SNR: > 112dB, BW 22.4kHz, A-Weighted
    • Crosstalk: - 100dB, adjacent Input / Output channels (Input Gain = min.)
    • THD+N: < 0.005% (20Hz to 20kHz, +4dBu)
    • Dynamic Range: > 112dB, BW 22.4kHz, A-Weighted
    • SNR: > 112dB, BW 22.4kHz, A-Weighted
    • Crosstalk: - 100dB, adjacent Input / Output channels, Input Gain = Min.

      Mechanical
    • Dimensions (LxWxH):
      With Rubber Protection: 6.4 x 3.2 x 2" (164 x 82 x 51mm)
      Without Rubber Protection: 5.9 x 2.6 x 1.6" (151 x 66 x 41mm)
    • Weight: 1.17Lbs (.53kg)
     
  • GTIN:

    7613187012952
     

NA2-IO-DPRO - Required Accessories

California Residents:
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov