NTI splitmux-c5hdr-4lc Low-Cost HDMI Quad Screen Splitter/Multiviewer/Extender

ITEM #: NETT-SPLITMUXC5H MFG #: SPLITMUX-C5HDR-4LC

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the NETT-SPLITMUXC5H

SPLITMUX-C5HDR-4LC - Overview

The SPLITMUX® Low-Cost HDMI Quad Screen Multiviewer allows you to simultaneously display real-time HDMI/DVI video from four different sources on a single monitor. It is capable of displaying the video sources in quad, PiP, or full screen mode. The audio/video output can be extended up to 250 feet away via a single CAT6/6a/7 cable.

Note: This device does not support HDCP.

  • Features:

    • Quad, Picture in Picture, and Full Screen display modes.
    • Independent video in to video out resolution.
    • Supported resolutions:
    • Input: HTDV resolutions to 1080p and computer resolutions to 1920x1200.
    • Output: 1080p, 1080i, 720p, 1024x768, 1360x768.
    • HDMI features supported:
    • Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
    • Outputs: 24- and 30-bit sRGB.
    • Four-channel non-mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio.
    • Bandwidth up to 165 MHz.
    • Inputs: 2.25 Gbps
    • Output: 2.0625 Gbps
    • Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
    • Switch audio independently of video from connected HDMI sources in Quad mode.
    • Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
    • Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
    • Control the multiviewer through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS232.
    • Bi-directional IR control from multiviewer and remote unit locations.
    • Cascade multiviewers to display video from any number of video sources on one screen.
    • Each unit in the cascade must be configured and controlled individually.
    • Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels of the cascade does not exceed 250 feet.
    • Compatible with SPLITMUX-HD-4RT for cascade configurations.
    • Adjust output video brightness, contrast, color, and sharpness.
    • Supports simultaneous local and remote HDMI output.
    • Features coax SPDIF audio outputs at the multiviewer and receiver.
    • Built-in default EDID table.
    • Supported output resolutions can be selected.
    • ARC (Audio Return Channel) support at the receiver unit via coax SPDIF output for speakers.
    • Turn ARC on to play audio from an HDTV with ARC support to the connected speakers.
    • Turn ARC off to play audio from the multiviewer source to the connected speakers.
     
  • Specifications:

    • Inputs
    • Four female HDMI connectors.
    • One 3.5mm port for IR receiver.
    • One RS232 port for Graphical User Interface (GUI) control.
    • Supports digital HDMI devices, such as DVD/Blu-ray players, satellite receivers, and HDTV tuners.
    • A DVI source can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the multiviewer.
    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
      Outputs
    • One female HDMI connector for local display.
    • One RJ45 connector for CATx cable to remote unit.
    • One coax connector for local SPDIF audio.
    • Four 3.5mm ports for IR emitters.
    • Output resolutions: 1080p, 1080i, 720p, 1024x768, 1360x768.
    • A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
      Power
    • 100 to 240 VAC at 50 or 60 Hz via AC adapter.
    • Power consumption: 10W.
      Dimensions
    • WxDxH (in): 9.84x4.65x1.26 (250x118x32 mm)
      Environmental
    • Operating temperature: 32 to 104°F (0 to 40°C).
    • Storage temperature: -4 to 140°F (-20 to 60°C).
    • Operating and storage relative humidity: 20 to 90% non-condensing RH.
    • Regulatory Approvals
    • CE, FCC, RoHS
      Compatible NTI Products
    • Combine NTI's multiviewers and video converters for cost-effective display configurations.
    • DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM).
    • The cable does not pass audio to the multiviewer.
    • HDMI Quad Screen Multiviewer (SPLITMUX-HD-4RT)
    • DVI + Stereo Audio to HDMI Converter
    • (DVIA-HD-CNVTR-LC)
    • DVI + Digital Audio to HDMI Converter
    • (DVI-HD-CNVTR)
    • Composite Video + Audio to HDMI Converter
    • (CVA-HD-LC)
    • VGA + Audio to HDMI Converter Cable
    • (VGAA-HD-ULC)
    • VGA/Component Video/HDMI Scaler/Converter
    • (PCHD-HDMI-SCALER)
      Inputs
    • One RJ45 connector for CATx cable to multiviewer.
    • One 3.5mm port for IR receiver.
      Outputs
    • One female HDMI connector for remote display.
    • One coax connector for remote SPDIF audio.
    • Supports ARC (Audio Return Channel)
    • One 3.5mm port for IR emitter.
    • Supports crisp and clear HDTV resolutions to 1080p and computer resolutions to 1920x1200.
    • A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
      Power
    • 100 to 240 VAC at 50 or 60 Hz via AC adapter.
      Dimensions
    • WxDxH (in): 4.02x2.60x1.02 (102x66x26 mm)
      Environmental
    • Operating temperature: 32 to 104°F (0 to 40°C).
    • Storage temperature: -4 to 140°F (-20 to 60°C).
    • Operating and storage relative humidity: 20 to 90% non-condensing RH.
      Regulatory Approvals
    • CE, FCC, RoHS
     
  • Item Includes:

    • One HDMI Multiviewer
    • One remote unit
    • One 12V, 2.5A power supply
    • One 5V, 1A power supply
    • One IR remote
    • Five IR emitters
    • Two IR receivers
    • One 4.6 ft (1.4 m) RS232 cable
    • Wall mount brackets with screws
    • User manual
     

SPLITMUX-C5HDR-4LC - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov