RDL DS-AVMB2 Audio and Video Monitor BNC Panels

ITEM #: RDL-DS-AVMB2 MFG #: DS-AVMB2

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the RDL-DS-AVMB2

DS-AVMB2 - Overview

The D/S-AVMB2 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel.The front panel features a standard video monitor connector. Video components, video sync and their respective ground returns are separated to feed five BNC jacks on the rear panel. The BNC jacks are isolated from the module chassis ground so the appropriate signal grounds pass through without adding a video ground loop at the panel.The front panel features a single stereo mini-jack, intended for stereo consumer line-level audio sources. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.

  • Features:

    • Stereo Audio Input to Stereo Audio Output
    • Stereo Input on Mini-Jack
    • Unbalanced Audio Output on Detachable Terminal Block
    • Video Monitor Input on Standard Video Connector
    • Rear-Panel Video Outputs (R,G,B,H,V) on BNC Jacks
    • BNC Jacks are Isolated from Chassis Ground
    • Available in Stainless Steel
     
  • Specifications:

    • Audio Input connector: Mini-jack 3.5 mm (Stereo)Video Input connector: Female DB15
    • Audio output connector: Detachable terminal block (Left and Right unbalanced audio)
    • Video output connectors (5): BNC (R: Red; G: Green; B: Blue; H: Horizontal Sync; V: Vertical Sync)Dimensions: Height: 4.13 in. 10.49 cm
      Width: 1.7 in. 4.32 cm
      Depth: 1.4 in. 3.56 cm
    • Mounting Box MinimumDimensions: Width: 1.80 in. 4.57 cm
      Depth: 0.15 in. (0.38 cm) plus the depth of the installer-provided BNC connectorsPackage Type: Cardboard Box
    • Package Dimensions: 3.625 x 4.625 x 2.125 in.
    • Shipping Weight: 0.4 lbs.
    • WEEE weight: 0.255 lbs.
    • Tariff code: 8536.69.4030
     
  • GTIN:

    0813721014979
     

DS-AVMB2 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov