Shure AD4DNP-A Axient Digital 2-Channel Wireless Receiver - G56 Band (470 - 636MHz) - No Parts

AD4DNP=-A - Overview

• Features:

  • Wide tuning range up to 184 MHz
  • True digital diversity reception per channel for drop-out resistance
  • Networked control with Wireless Workbench software and ShurePlus Channels iOS app
  • Front panel headphone jack enables Dante Cue and Dante Browse monitoring
  • Configurable Ethernet switch for redundant Dante digital output
  • AES3 output
  • Channel Quality meter displays RF signal-to-noise
  • Locking AC connectors
  • Optional DC module available to support redundant power
   

• Specifications:

  • Dimensions (H × W × D): 1.7 in. × 19.0 in. × 13.1 in.
  • Weight: 10.1 lbs, without antennas
  • Housing: Steel; Extruded aluminum
  • Power Requirements: 100 to 240 V AC, 50-60 Hz; 0.26 A max.
  • Thermal Dissipation: Maximum: 23 W (78 BTU/hr); Idle: 15 W (52 BTU/hr)
    
    Audio Output
  • Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground); XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
  • Impedance (Typical, XLR Line out): 100Ω
  • Full Scale Output (200 kΩ load): 1/4" (6.35 mm): +8 dBV; XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: Yes
    
    Networking
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Ethernet Cable Length: 100 m (328 ft)
    
    Cascade output
  • Connector Type: BNC
  • Configuration: Unbalanced, passive
  • Impedance: 50 Ω
  • Insertion Loss: 0 dB, typical
    
    RF Input
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance 50 Ω
  • Bias Voltage: 12-13.5 V DC, 150 mA maximum, per antenna, switchable on/off
  • RF Carrier Frequency Range: AD4D=A: 470-636 MHz
   

• GTIN:

  0042406533553