Studio Technologies M370A 2-Channel Intercom Beltpack with Dante - 5-Pin Female Headset Connector

ITEM #: ST-MODEL-370A MFG #: M370A

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Free Shipping with $49 Minimum Order

Our Price:

$595.00

Availability: In Stock
iAvailability Description Popup


    M370A - Overview

    The Studio Technologies M370A Intercom Beltpack begins with the features offered by traditional 2-channel party-line intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple M370A units can be used in party-line (PL) intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies M5422 Dante Intercom Audio Engine. Alternately, units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.

    • Features:

      • Dante audio-over-Ethernet technology
      • Two independent talk and listen channels
      • Integrated call function
      • Supports dynamic and electret microphones
      • 5-pin female XLR headset connector
      • Excellent audio quality
      • Uses STcontroller for configuration
      • AES67 and Dante Domain Manager™ support
      • Power-over-Ethernet (PoE) powered
       
    • Specifications:

      • Power Source: Power-over-Ethernet (PoE): class 1 (very low power, =3.84 watts) per IEEE® 802.3af

        Network Audio Technology:
      • Type: Dante audio-over-Ethernet
      • AES67-2013 Support: yes
      • Dante Domain Manager (DDM) Support: yes
      • Bit Depth: up to 24
      • Sample Rate: 48 kHz
      • Number of Transmitter (Output) Channels: 2
      • Number of Receiver (Input) Channels: 2
      • Dante Audio Flows: 4; 2 transmitter, 2 receiver

        Network Interface
      • Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
      • Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)

        Audio Channels 2 talk, 2 listen

        Microphone Input
      • Compatibility: dynamic or electret (low-voltage DC-powered) microphones
      • Type: unbalanced
      • Electret Microphone Power: 5 volts DC via 2.21 k resistor, selectable on/off
      • Gain: 22, 30, 42, or 48 dB, selectable, ref. -60 dBu input to Dante output (-20 dBFS nominal)
      • Frequency Response: 50 Hz to 10 kHz, -3 dB
      • Distortion (THD+N): <0.02%
      • Dynamic Range: 75 dB

        Compressor
      • Threshold: 1 dB above nominal level (-19 dBFS)
      • Slope: 2:1
      • Status LED: compressor active

        Headphone Output
      • Type: 2-channel
      • Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headsets with nominal impedance of 50 ohms or greater
      • Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
      • Frequency Response: 20 Hz to 10 kHz, -3 dB
      • Distortion (THD+N): <0.002%
      • Dynamic Range: >100 dB

        Call Function
      • Signaling Method: 20 kHz, ±800 Hz, within audio channels
      • Call Send Level: -20 dBFS
      • Call Receive Level: -27 dBFS minimum

        Connectors
      • Headset: 5-pin female XLR
      • Ethernet: Neutrik NE8FBH etherCON RJ45 receptacle
      • USB: type A receptacle (located inside Model 370A's enclosure and used only for application firmware updates)

        Configuration Requires Studio Technologies STcontroller software application, version 1.06.00 and later (STcontroller is compatible with Windows version 7 and later)

        General
      • Operating Temperature: 32° to 122°F (0° to 50°C)
      • Storage Temperature: -40° to 158°F (-40° to 70°C)
      • Humidity: 0 to 95%, non-condensing
      • Altitude: not characterized
      • Dimensions (WxHxD): 3.6 x 1.6 x 4.8" (9.2 x 4.0 x 12.6cm)
      • Mounting: intended for portable applications; contains integral belt clip; optional MBK-01 Mounting Bracket Kit allows Model 370A to be permanently mounted
      • Weight: 0.6Lbs (0.3kg)
       

    M370A - Required Accessories

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov