Tripp Lite SU12000RT4U 12000VA 8400W UPS Smart Online Rackmount 12kVA PDU 208/240/120V

SU12000RT4U - Overview

• Features:

  • True online, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise
  • 12,000 VA / 8400 watt output power capacity with dual voltage output of 208/120 or 240/120V
  • 4U high power density power module and 4U external battery pack supports rackmount installation in 8 rack spaces
  • Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
  • Hardwire input terminals and output receptacles are mounted on a detachable back plate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment
  • Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical servers, networking and telecommunications equipment
  • Maintains output within 3% of selected 208/120 or 240/120V nominal voltage during brownouts and overvoltages
  • Supports connected equipment during blackouts for 20/7 minutes at half/full load levels, runtime is further expandable with optional external BP192V18-4U battery packs
  • Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
  • Network interfaces support simultaneous communications via DB9 port, USB port and SNMPWEBCARD slot. DB9 port supports RS-232 and dry contact messaging. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
  • Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
  • Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control
  • Built-in Emergency Power Off (EPO) interface with cable
  • Includes 13 output receptacles (2 L6-30R, 6 C19, 5 NEMA 5-15/20R) plus hardwire output, all of which are available for simultaneous use
  • Split phase, 4 conductor hardwire input connection (featured on included detachable PDU).
  • Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions
  • Front panel switches enable power on/off control, self-test and alarm cancel functions
  • Included adjustable mounting rails support installation in 4 post 19 inch rack enclosures
  • Optional 2-9USTAND set of tower stands supports upright tower installation
  • Optional 2POSTRMKITHD enables installation in 2 post racks (2 required)
  • Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
  • $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
   

• Specifications:

  • Rated input current (Maximum Load): 50A
  • UPS Input Connection Type: Hardwire
  • UPS Input Connection Description: 4 wire split-phase input (L1, L2, N, G)
  • Recommended Electrical Service: 50A 208/240-120 Split Phase
  • Input Phase: Single-Phase
  • Full Load Runtime (min.): 7 min. (8400w)
  • Half Load Runtime (min.): 20 min. (4200w)
  • Battery Recharge Rate (Included Batteries): Less than 6 hours from 10% to 80% (typical, full load discharge)
  • Battery Replacement Description: Hot-swappable, user replaceable batteries
  • Voltage Regulation Description: Online, double-conversion power conditioning
  • Overvoltage Correction: 3% output voltage regulation during overvoltages to 140 (measured L1-N : L2-N)
  • Undervoltage Correction: 3% output voltage regulation during undervoltages to 65 (measured L1-N : L2-N)
  • Included Mounting Accessory Description: 2 sets of adjustable 4 post rack rails included
  • Relative Humidity: 0 to 95%, non-condensing
  • AC Mode BTU / Hr. (Full Load): 4286
  • Battery Mode BTU / Hr. (Full Load): 3187
  • AC Mode Efficiency Rating (100% Load): 0.87
  • AC Economy Mode Efficiency Rating (100% Load): 0.94
  • Operating Elevation (ft.): 0-3000m (0 to 10,000 ft.)
  • Audible Noise: 60 dBA at front side 1 meter
  • Operating Elevation (m): 0-3000 m
  • Communications Interface: USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
  • Network Monitoring Port Description: RS232 and contact closure communications are supported on one DB9 port
  • PowerAlert Software: Included
   

• Item Includes:

  • SU12000RT4UPM 4u UPS Power Module
  • BP192V18-4U External battery pack
  • SUPDMB16K Detachable PDU with manual bypass switch
  • 4 post rackmount installation brackets
   

• GTIN:

  0037332154897