Ward Beck POD12A/110 Dual 1x4 or 1x8 AES/EBU Distribution Amplifier with SRC - 110 ohm version

ITEM #: WARD-POD12-110 MFG #: POD12A/110

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the WARD-POD12-110

POD12A/110 - Overview

POD12A/110 is a version of the POD12A one input eight output or dual one input four output AES/EBU digital audio distribution amplifiers. POD12A/110 is designed for 110 Ohm installations. POD12A/110 features cable equalization and reclocking techniques that enable the unit to reliably recover the incoming digital audio signal. Lock and No Lock LED tallies are located on the front panel. Sample rate conversion (SRC) to an external reference may be activated. The AES signal applied to input B is the reference signal. All inputs and outputs to POD12A/110 are made via pluggable 3-pin screw terminals connectors located on the rear panel. All inputs and outputs are transformer balanced.

  • Features:

    • AES/EBU digital audio distribution amplifier which supports sampling frequencies from 30kHz to 192kHz.
    • Features cable length equalization and re-clocking techniques which enable the unit to reliably recover the incoming digital audio signal.
    • Features a selector switch on the rear panel which allows for single 1x8 or dual 1x4 operation, for increased versatility.
    • Note: Enabling the SRC limits the POD12A to 1x8 mode.
    • Front panel of POD12A features several LED tallies which, when lit, indicate the following: a) 1 in x 8 out mode, b) Dual 1 in x 4 out mode, c) SRC enabled, d) Cable length EQ1 enabled and e) Cable length EQ2 enabled.
    • Lock and No Lock for each input.
    • All inputs and outputs to POD12A/110 are transformer balanced and connections are made via terminal blocks located on the rear panel.
     

  • Specifications:

    • Input Impedance: 110 Ohm transformer balanced.
    • Input Level: 0.2-7 V p-p.
    • Output Level: 3.0 V p-p terminated.
    • Sampling Frequency Range: 30 kHz to 192 kHz.
    • Jitter (average 1-100 kHz): Better than 5 ns.
    • Output Impedance: 110 Ohm transformer balanced.
    • Power Requirements: 100-240 VAC,50-60Hz.
    • Dimensions: 8.69" wide x 1.73" high x 7.0" deep / (221mm x 44mm x 178mm).
    • Weight: 1.37 kg (3.01 lbs).
     

Required Accessories

POD12A/110 - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov